1-15 of 404
  • ARM Ltd: Vertical flow reedbed: municipal effluent
    Vertical flow reedbed: municipal effluent
    ARM Ltd
    Lower Basildon WwTW is owned and operated by Thames Water and is situated within the grounds of Beale Park seven miles North West of Reading. The works serves a PE 166 (2011 – Average). Sewage is collected by gravity and...
  • Bürkert Fluid Control Systems: Robolux valves facilitate fluid distribution for Biopure
    Robolux valves facilitate fluid distribution for Biopure
    Bürkert Fluid Control Systems
    The Biopure Corporation in Cambridge, Massachusetts was faced with a challenging fluid distribution problem. In this new application, a common transfer panel would be both costly and hard to access. Additionally, Biopure...
  • ARM Ltd: Surface water run-off solution for distribution centre
    Surface water run-off solution for distribution centre
    ARM Ltd
    IKEA's Peterborough warehouse generates a significant rainfall catchment. The consequent run-off generated during rainfall events required management and treatment prior to discharge back into the environment. A spillway was...
  • Corgin: Nitrification Restart Programme for paper mill
    Nitrification Restart Programme for paper mill
    Corgin
    A paper mill in North West England produces 450,000 tons of finished newsprint annually, generating some 21,000m³ of wastewater a day. A long-standing commitment to environmental compliance, which is closely monitored by the...
  • Corgin: Aerators improve effluent quality at sugar factory
    Aerators improve effluent quality at sugar factory
    Corgin
    An effluent plant at a sugar factory in the UK had been struggling to meet consent levels as their aerators were very old and inefficient. The plant has various challenges, including very high mixed liquor suspended solids...
  • Inspectahire Instrument Company: Pipe integrity inspection, Subsea 7, Edinburgh
    Pipe integrity inspection, Subsea 7, Edinburgh
    Inspectahire Instrument Company
    In subsea field development, production wells are linked by pipe. Inspectahire was contracted to undertake trials to validate the effect of pipe bending. Using pipe laser metrology, Inspectahire was able to scan pipe...
  • Corgin: Odour and dust control at a new recycling facility
    Odour and dust control at a new recycling facility
    Corgin
    Construction work was already well underway at a prestigious new waste recycling facility in late 2007 by the time installation of the dust suppression system began. Corgin had been selected as the supplier of choice by the...
  • J.A.M.: Aqualarm water leak detection systems for data centre
    Aqualarm water leak detection systems for data centre
    J.A.M.
    J.A.M successfully completed the supply and commissioning of a number of Aqualarm water leak detection systems to the Turkcell Gebze Data Centre, Phases 1, 2 and 3 through its Turkish agent PiEM Elektromekanik Kontrol...
  • Runners Sliding Door Systems: Bespoke overhead conveyor system for joinery works
    Bespoke overhead conveyor system for joinery works
    Runners Sliding Door Systems
    A bespoke Multirail Auto overhead conveyor system was installed at the joinery paint works of the CCG Group, one of Scotland’s largest privately-owned construction and manufacturing companies. The robotically controlled...
  • Warden Biomedia: WPL selects Biomarble biological filter media
    WPL selects Biomarble biological filter media
    Warden Biomedia
    A motorway service area (MSA), situated on the M3 at Winchester, serves both sides of the M3 with two filling stations and amenity buildings with restaurants, cafes, toilets, shops and a 40-bedroom lodge. In 2008, the sewage...
  • ELIQUO HYDROK: Combined sewer overflow for United Utilities at Hyndburn
    Combined sewer overflow for United Utilities at Hyndburn
    ELIQUO HYDROK
    United Utilities needed a refurbishment solution for their combined sewer overflow system in the Hyndburn drainage area, East Lancashire. The CSO chamber is 18 metres below ground within an 84m-long tunnel. ELIQUO HYDROK...
  • Bürkert Fluid Control Systems: Efficient oxidation process removes iron and manganese
    Efficient oxidation process removes iron and manganese
    Bürkert Fluid Control Systems
    In many waterworks, the addition of oxidation air is performed manually by means of simple mechanical valves. With this procedure, an experienced waterworks supervisor can guarantee the quality of the drinking water – but...
  • H+E UK: Outokumpu Stainless Ltd, Sheffield
    Outokumpu Stainless Ltd, Sheffield
    H+E UK
    Outokumpu Stainless Ltd is one of the world's largest manufacturers of stainless steel strip, plate and rod. It was previously known as Avesta Stainless Ltd. The company's Sheffield rod mill rolls wire in a variety of alloys...
  • 2H Water Technologies: BIOdek™ cross flow media for sewage treatment works
    BIOdek™ cross flow media for sewage treatment works
    2H Water Technologies
    2H Water Technologies was contracted to provide filter media for an update to the secondary treatment system at a large municipal sewage treatment works. The project required 21,000 cubic metres of BIOdek™ plastic structured...
  • Bürkert Fluid Control Systems: Process technology for bespoke intelligent evaporators
    Process technology for bespoke intelligent evaporators
    Bürkert Fluid Control Systems
    MKR Metzger from Monheim in Germany is a specialist in handling process media in a sustainable manner. To design production cycles involving liquids in a cost-efficient manner, they need robust and reliable components. Using...