1-15 of 15

J.A.M.

   Rayleigh, SS6 7XJ   View on map
Call 01268 777222   Visit website
  • J.A.M.: ZLM-500 zoned locating module for cable monitoring
    ZLM-500 zoned locating module for cable monitoring
    J.A.M.
    The Aqualarm ZLM-500 zoned locating module is used to monitor combined leader / jumper and detecting cables for water leaks and cable damage. ZLM-500 is typically used for larger areas allowing monitoring per zone. It can...
  • J.A.M.: UDF-24 ‘Universal’ Float Detector for water levels
    UDF-24 ‘Universal’ Float Detector for water levels
    J.A.M.
    The UDF-24 ‘Universal’ Float Detector requires a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: does not require an i-Zone control panel; for...
  • J.A.M.: HDi-24 humidity detector
    HDi-24 humidity detector
    J.A.M.
    The Aqualarm HDi-24 humidity detector is comprised of a STAREX General ABS box (SD-0150) housing the electronic circuitry to detect changes in the level of humidity and give an alarm signal should the humidity drop below the...
  • J.A.M.: IRDi-24 point of use infrared oil detector
    IRDi-24 point of use infrared oil detector
    J.A.M.
    The IRDi-24 point of use oil detector is made up of two components: the detector module and the point of use detector, connected together via a 1m jumper cable. Both the detector module and point of use detector are...
  • J.A.M.: UDP-24 ‘Universal’ Point of use Water Detector
    UDP-24 ‘Universal’ Point of use Water Detector
    J.A.M.
    The UDP-24 ‘Universal’ Point of use Water Detector needs a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: 24v power source required; does not...
  • J.A.M.: UDC-24 ‘Universal’ Zone Detector Module for water leaks
    UDC-24 ‘Universal’ Zone Detector Module for water leaks
    J.A.M.
    The UDC-24 ‘Universal’ Zone Detector Module requires a 24-volt power source and, in the event of an alarm, a volt-free contact is triggered, giving an alarm signal back to a BMS. Does not require an i-Zone control panel;...
  • J.A.M.: RGi-xx-24 refrigerant detector
    RGi-xx-24 refrigerant detector
    J.A.M.
    The Aqualarm RGi-xx24 refrigerant gas detector is comprised of a STAREX General ABS box (SD-0150) housing the electronic circuitry to detect the presence of the nominated refrigerant gas. The alarm threshold can be adjusted...
  • J.A.M.: FLi-24 liquid level detector
    FLi-24 liquid level detector
    J.A.M.
    The FLi-24 liquid level detector is made up of two components: the detector module and the float switch, connected together via a 1m jumper cable. Both the detector module and the float switch are manufactured from STAREX...
  • J.A.M.: STDi-24 point of use conductive water detector
    STDi-24 point of use conductive water detector
    J.A.M.
    The STDi-24 point of use water detector is comprised of two components: the detector module and the point detector, connected together via a 1m jumper cable. Both the detector module and point detector are manufactured from...
  • J.A.M.: UDIN-24 Infrared Detector for non-conductive fluids
    UDIN-24 Infrared Detector for non-conductive fluids
    J.A.M.
    This UDIN-24 ‘Universal’ Point of use Infrared Detector requires a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: this detector does not require...
  • J.A.M.: UDOF-24 ‘Universal’ water in overflow pipe detector
    UDOF-24 ‘Universal’ water in overflow pipe detector
    J.A.M.
    UDOF-24 ‘Universal’ Overflow Detector is used to detect water in an overflow pipe. It requires a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS
  • J.A.M.: TDi-24 temperature detector
    TDi-24 temperature detector
    J.A.M.
    The Aqualarm TDi-24 temperature detector is comprised of a STAREX General ABS box (SD-0150) housing the electronic circuitry to detect changes in temperature and give an alarm signal should the temperature drop below the low...
  • J.A.M.: iZ-T25 touchscreen control panel for multiple detectors
    iZ-T25 touchscreen control panel for multiple detectors
    J.A.M.
    The iZ-T25 touchscreen control panel can simultaneously monitor for water, oil or refrigerant gas leaks, as well as fluctuations of temperature and humidity from preset levels. Built-in Help screens promote ease of use.
  • J.A.M.: i-Zone Mini control panel multi-zone water leak detector
    i-Zone Mini control panel multi-zone water leak detector
    J.A.M.
    The i-Zone Mini control panel can monitor up to four zones for water leak detection using cable, point, float, or overflow detectors. The status of each detector is displayed on an LED monitor. Up to 100m of network cable...
  • J.A.M.: OFDi-24 overflow detector – water in overflow pipes
    OFDi-24 overflow detector – water in overflow pipes
    J.A.M.
    The Aqualarm OFDi-24 overflow detector is made up of two components: the detector module and the overflow detector, connected via a 2m jumper cable. Both the detector module and overflow detector are manufactured from STAREX...