The iZ-T25 touchscreen control panel is capable of monitoring the full range of Aqualarm detectors, including water, oils, chemicals, and refrigerant gas leak detectors, and temperature and humidity detectors. It can monitor up to 25 detectors or zones.
Two pulsed flowmeters for incoming mains water can also be monitored, with the facility to control a solenoid valve.
By connecting the control panel to a ZLM-500 zone locating module, the display will show a meterage reading accurate to +/- 1m to the point where a water leak occurred along the cable.
The detectors or zones can be monitored via the current addressable CAN network, with planned future expansion to a RS485 network and a 433 MHz wireless network.
The control panel can store 100 events logs, which are protected by a non-volatile memory. The system is fitted with two sealed rechargeable lead acid batteries to support the system in a mains power down or during switchover periods. When power is reinstated, the system will automatically restart.
The i-Zone control panel is constructed from mild steel with a durable powder-coated finish. It is suitable for wall mounting.
- MODBUS TCP/IP
- Five programmable volt-free contacts
- 12V powered contacts to activate a sounder / beacon
- 12V and 24V powered auxiliary outputs
- One 24V at 8A (non-powered) relay to activate a flowmeter solenoid valve
Normal operating voltage
24V DC, internally supplied
BS EN ISO 14001 and ISO 9001:1994
EMC Directive 89/336/EEC
355 (H) x 290 (W) x 95mm (D)