COOL-FIT 2.0 is a non-corroding, non-condensing solution for the transport of chilled water in climate control systems inside residential and commercial buildings, data centres and industrial process cooling.

The system uses electrofusion jointing techniques with industrial grade PE100 as the carrier pipe. All components are pre-insulated with GFHE insulation (0.022 W/m.K), together with a load-bearing, robust outer jacket in black HDPE or stainless steel. This unique combination leads to highly competitive characteristics.

25% higher energy efficiency

U-values (heat transfer) of COOL-FIT 2.0 pipe are between 1.0 and 3.8 W/m.K, up to 25% better than traditional steel pipes with foamed NBR rubber insulation.

Installation times reduced by at least 50%

COOL-FIT 2.0 combines three products – carrier pipe, insulation and jacket – into one system. This ensures 'on-site' time is reduced to a minimum. No post-insulation of the pipe system and no time-consuming and expensive pre-insulated pipe supports or blocks are required.

COOL-FIT 2.0 is a PN16 system suitable for fluid temperatures from 0-60°C. The carrier pipe/jacket dimensions range from d32/75-140/200mm. Both pipe and fittings are pre-insulated with GFHE to a thickness of 20mm. GF valves, plastic to metal transitions, as well as hoses for easy connection to appliances are all also provided pre-insulated.


COOL-FIT 2.0 is a non-corroding, non-condensing solution for the transport of chilled water in climate control systems inside residential and commercial buildings, data centres and industrial process cooling.

The system uses electrofusion jointing techniques with industrial grade PE100 as the carrier pipe. All components are pre-insulated with GFHE insulation (0.022 W/m.K), together with a load-bearing, robust outer jacket in black HDPE or stainless steel. This unique combination leads to highly competitive characteristics.

25% higher energy efficiency

U-values (heat transfer) of COOL-FIT 2.0 pipe are between 1.0 and 3.8 W/m.K, up to 25% better than traditional steel pipes with foamed NBR rubber insulation.

Installation times reduced by at least 50%

COOL-FIT 2.0 combines three products – carrier pipe, insulation and jacket – into one system. This ensures 'on-site' time is reduced to a minimum. No post-insulation of the pipe system and no time-consuming and expensive pre-insulated pipe supports or blocks are required.

COOL-FIT 2.0 is a PN16 system suitable for fluid temperatures from 0-60°C. The carrier pipe/jacket dimensions range from d32/75-140/200mm. Both pipe and fittings are pre-insulated with GFHE to a thickness of 20mm. GF valves, plastic to metal transitions, as well as hoses for easy connection to appliances are all also provided pre-insulated.


Interested in this product?
Call 024 7653 5535
OR
 
 
 
Enquire
 


Not found what you're looking for? View other options

Ask George Fischer Sales about

COOL-FIT 2.0 pre-insulated PE100 plastic piping system