Media detected Oil
Suitability Enclosures
Type Point loss
Features Audible alarm
Visual alarm
 
 
 

The IRDi-24 point of use oil detector is made up of two components: the detector module and the point of use detector, connected together via a 1m jumper cable.

Both the detector module and point of use detector are manufactured from STAREX General ABS (SD-0150) plastic.

The detector module houses the electronic circuitry and the point of use detector houses the infra-red transmitter / receiver, which extends from the bottom of the detector.

A reflective area (50mm diameter) must be painted on the floor with paint capable of reflecting light (eg standard white gloss paint).

The jumper cable is connected to the top of the point of use detector via a 3-pin plug and socket.

A red LED will glow to indicate an alarm condition. Alarm status and monitoring is via a network, using a CAN bus system.

A stabilising bar is required, as a means of fixing the point of use detector to the floor surface.

  • For use within plant rooms and other solid floor areas
  • For the detection of oil, and all other non-conductive liquids
  • Manufactured from rust-proof and hard-wearing ABS plastic
  • Two component design - keeping head and electronic module separate
  • LED and internal alarm sounder in module to give local alarm indication
  • Multiple types of protection covers are available to prevent mechanical damage
  • For connection to i-Zone or i-Zone Touch control panels

Data

  • Normal operating voltage: 24 volts DC
  • Quiescent current: <10mA per detector
  • Alarm current: <100mA per detector
  • Detector oscillator frequency: 6kHz
  • Infra-red probe type: Gallium arsenide
  • Recommended interconnecting cable: 120Ohm 4 core 0.5mm2; screened twisted pair
  • Line-out voltage drop: 1.5mV/m

Approvals

  • BS EN ISO 9001:1994
  • EMC Directive 89/336/EEC

Dimensions

  • Module: 45 (h) x 70 (w) x 135mm (l)
  • Detector: 65 (h) x 55mm (w)


The IRDi-24 point of use oil detector is made up of two components: the detector module and the point of use detector, connected together via a 1m jumper cable.

Both the detector module and point of use detector are manufactured from STAREX General ABS (SD-0150) plastic.

The detector module houses the electronic circuitry and the point of use detector houses the infra-red transmitter / receiver, which extends from the bottom of the detector.

A reflective area (50mm diameter) must be painted on the floor with paint capable of reflecting light (eg standard white gloss paint).

The jumper cable is connected to the top of the point of use detector via a 3-pin plug and socket.

A red LED will glow to indicate an alarm condition. Alarm status and monitoring is via a network, using a CAN bus system.

A stabilising bar is required, as a means of fixing the point of use detector to the floor surface.

  • For use within plant rooms and other solid floor areas
  • For the detection of oil, and all other non-conductive liquids
  • Manufactured from rust-proof and hard-wearing ABS plastic
  • Two component design - keeping head and electronic module separate
  • LED and internal alarm sounder in module to give local alarm indication
  • Multiple types of protection covers are available to prevent mechanical damage
  • For connection to i-Zone or i-Zone Touch control panels

Data

  • Normal operating voltage: 24 volts DC
  • Quiescent current: <10mA per detector
  • Alarm current: <100mA per detector
  • Detector oscillator frequency: 6kHz
  • Infra-red probe type: Gallium arsenide
  • Recommended interconnecting cable: 120Ohm 4 core 0.5mm2; screened twisted pair
  • Line-out voltage drop: 1.5mV/m

Approvals

  • BS EN ISO 9001:1994
  • EMC Directive 89/336/EEC

Dimensions

  • Module: 45 (h) x 70 (w) x 135mm (l)
  • Detector: 65 (h) x 55mm (w)


Interested in this product?
Call 01268 777222
OR
 
 
 
Downloads
  • IRDi-24 point of use infrared detector
    IRDi-24 point of use infrared detector
    1pp 109.49KB
    Download
 
 
 
Enquire
 


Related entries

  • J.A.M.: Aqualarm water leak detection systems for data centre
    Aqualarm water leak detection systems for data centre
    J.A.M.
    J.A.M successfully completed the supply and commissioning of a number of Aqualarm water leak detection systems to the Turkcell Gebze Data Centre, Phases 1, 2 and 3 through its Turkish agent PiEM Elektromekanik Kontrol...
  • J.A.M.: iZ-T25 touchscreen control panel for multiple detectors
    iZ-T25 touchscreen control panel for multiple detectors
    J.A.M.
    The iZ-T25 touchscreen control panel can simultaneously monitor for water, oil or refrigerant gas leaks, as well as fluctuations of temperature and humidity from preset levels. Built-in Help screens promote ease of use.
  • J.A.M.: i-Zone Mini control panel multi-zone water leak detector
    i-Zone Mini control panel multi-zone water leak detector
    J.A.M.
    The i-Zone Mini control panel can monitor up to four zones for water leak detection using cable, point, float, or overflow detectors. The status of each detector is displayed on an LED monitor. Up to 100m of network cable...
Not found what you're looking for? View other options

Ask J.A.M. about

IRDi-24 point of use infrared oil detector