Media detected Water
Operation Probe
Features Audible alarm
Visual alarm
 
 
 

The Aqualarm OFDi-24 overflow detector is made up of two components: the detector module and the overflow detector, connected via a 2m jumper cable.

Both the detector module and overflow detector are manufactured from STAREX General ABS (SD-0150) plastic.

The bottom of the overflow detector is fitted with a ¾” BSP threaded connector with two stainless steel sensing probes extending from the end. The connector should be inserted into a ‘tee’ to enable the probes to sense any water passing through the main overflow pipe.

A red LED is incorporated onto the detector module, and will glow to indicate the detection of water.

Alarm monitoring and status is via a network, using a CAN bus system.

  • For detection of water within an overflow pipe
  • ¾” BSP threaded connector for insertion into a tee piece
  • Manufactured from rust-proof and hard-wearing ABS plastic
  • Two component design - keeping head and electronic module separate
  • LED and internal alarm sounder in module to give local alarm indication
  • For connection to i-Zone or i-Zone Touch control panels

Data

  • Normal operating voltage: 24 volts DC
  • Quiescent current: <10mA per detector
  • Alarm current: <100mA per detector
  • Detector oscillator frequency: 6kHz
  • Voltage at probes: 2 volts AC
  • Recommended interconnecting cable: 120Ohm 4 core 0.5mm2; screened twisted pair
  • Line-out voltage drop: 1.5mV/m

Approvals

  • BS EN ISO 9001:1994
  • EMC Directive 89/336/EEC

Dimensions

  • Module: 45 (h) x 70 (w) x 135mm (l)
  • Detector: 55 (h) x 80mm (w)
  • BSP thread depth: 30mm


The Aqualarm OFDi-24 overflow detector is made up of two components: the detector module and the overflow detector, connected via a 2m jumper cable.

Both the detector module and overflow detector are manufactured from STAREX General ABS (SD-0150) plastic.

The bottom of the overflow detector is fitted with a ¾” BSP threaded connector with two stainless steel sensing probes extending from the end. The connector should be inserted into a ‘tee’ to enable the probes to sense any water passing through the main overflow pipe.

A red LED is incorporated onto the detector module, and will glow to indicate the detection of water.

Alarm monitoring and status is via a network, using a CAN bus system.

  • For detection of water within an overflow pipe
  • ¾” BSP threaded connector for insertion into a tee piece
  • Manufactured from rust-proof and hard-wearing ABS plastic
  • Two component design - keeping head and electronic module separate
  • LED and internal alarm sounder in module to give local alarm indication
  • For connection to i-Zone or i-Zone Touch control panels

Data

  • Normal operating voltage: 24 volts DC
  • Quiescent current: <10mA per detector
  • Alarm current: <100mA per detector
  • Detector oscillator frequency: 6kHz
  • Voltage at probes: 2 volts AC
  • Recommended interconnecting cable: 120Ohm 4 core 0.5mm2; screened twisted pair
  • Line-out voltage drop: 1.5mV/m

Approvals

  • BS EN ISO 9001:1994
  • EMC Directive 89/336/EEC

Dimensions

  • Module: 45 (h) x 70 (w) x 135mm (l)
  • Detector: 55 (h) x 80mm (w)
  • BSP thread depth: 30mm


Interested in this product?
Call 01268 777222
OR
 
 
 
Downloads
  • OFDi-24 overflow detector
    OFDi-24 overflow detector
    1pp 101.67KB
    Download
 
 
 
Enquire
 


Related entries

  • J.A.M.: iZ-T25 touchscreen control panel for multiple detectors
    iZ-T25 touchscreen control panel for multiple detectors
    J.A.M.
    The iZ-T25 touchscreen control panel can simultaneously monitor for water, oil or refrigerant gas leaks, as well as fluctuations of temperature and humidity from preset levels. Built-in Help screens promote ease of use.
  • J.A.M.: i-Zone Mini control panel multi-zone water leak detector
    i-Zone Mini control panel multi-zone water leak detector
    J.A.M.
    The i-Zone Mini control panel can monitor up to four zones for water leak detection using cable, point, float, or overflow detectors. The status of each detector is displayed on an LED monitor. Up to 100m of network cable...
  • J.A.M.: Aqualarm water leak detection systems for data centre
    Aqualarm water leak detection systems for data centre
    J.A.M.
    J.A.M successfully completed the supply and commissioning of a number of Aqualarm water leak detection systems to the Turkcell Gebze Data Centre, Phases 1, 2 and 3 through its Turkish agent PiEM Elektromekanik Kontrol...
Not found what you're looking for? View other options

Ask J.A.M. about

OFDi-24 overflow detector – water in overflow pipes