- On this page
- Product
- Illustrations
- Fast facts
- Description
- Downloads
- Related info
- Addresses
| Chemicals / parameters |
Ammonia Water quality |
| Suitability |
Food / drink Potable water Process liquids Raw water Sludge / slurry / sewage |
| Type |
Fixed Portable Wall mounted |
| System type |
Analysers |
| Features |
Alarm trip Datalogging Self cleaning Waterproof Weatherproof |
The ProAm ammonia monitor provides continuous measurement of ammoniacal-nitrogen using an ion selective gas sensing technique.
The instrument has wide diameter internal tubing and uses pinch valve technology to distribute fluids for analysis. Automatic calibration and chemical cleaning ensure reliable operation and self validation of measurement.
Applications
Ideally suited to low concentration measurement such as final effluent and raw water intake protection applications.
Filtration
The provision of membrane filtration, removing solids and biology above 0.45micron, ensures reliable operation even in challenging applications.
Sampling
Samples may be delivered to the instrument / panel filter or alternatively the membrane filtration may be mounted directly into the sample tank or chamber.
Installation
The instrumentation may be installed within an existing enclosure or PPM can provide secondary enclosures, complete with pre-installation to suit the application.
Related entries
-
Proam chloride monitor with auto-clean & calibration
Pollution & Process Monitoring (PPM)ProAm is an online analyser providing continuous or interval measurement of a water or wastewater sample. Typically the instrument is configured for ammonia measurement although other ion selective sensors are also available. The integration of a chloride electrode then allows configuration for determination of chloride concentrations. Whilst the...Product, 05 May 2017 -
Installation, commissioning & training - instrumentation
Pollution & Process Monitoring (PPM)Pollution & Process Monitoring Ltd is a specialist manufacturer and supplier of water quality instrumentation. To products which we supply are supported by an installation, commissioning and training service, to ensure that instrumentation is delivered and subsequently maintained to the best possible standards. Whilst the correct instrumentation...Product, 12 December 2017 -
Final effluent ProAm ammonia monitoring at Wessex Water
Pollution & Process Monitoring (PPM)The Poole WwTW site was initially selected to test the ProAm ammonia monitor on final effluent, over a two month test period in 2004. The trial was a success and Wessex Water decided to make the installation permanent. Since making the initial installation at the UV disinfection plant, four additional ProAm monitors have been installed across the...Projects, 29 October 2015 -
Wessex Water picks ProAm ammonia for Yeovil installation
Pollution & Process Monitoring (PPM)Another ProAm ammonia monitor has been purchased for installation at Pen Mill WwTW in Yeovil. The site receives imported sludge and therefore is subject to varying load conditions. The decision has been taken to replace the existing, less accurate probe technology with the proven Proam analyser design, calibrating against known standards to...News, 23 September 2014 -
Severn Trent Water installs Proam ammonia monitor
Pollution & Process Monitoring (PPM)Following a rigorous field evaluation conducted by WRc, comparing the Proam ammonia monitor performance against a maintained site instrument, laboratory testing and comparison with six other manufacturer's instruments; the Proam has been selected for final effluent compliance monitoring by Severn Trent Water. Since finalising the purchase...News, 12 June 2015
More liquids measurement by Pollution & Process Monitoring (PPM)
View all
Also by Pollution & Process Monitoring (PPM)
Pollution & Process Monitoring (PPM) address and contact details
18-19 Bourne Enterprise Centre
Wrotham Road
Borough Green
Sevenoaks
TN15 8DG
Tel: 01732 882044
Fax: 01732 780190
View on map - 2 addresses
