Media blown Process gases
Dirty / waste gases
Aggressive gases
Operation Oil free
Minimum flow capacity (m3/h) 15,000
Maximum flow capacity (m3/h) 100,000
Maximum pressure (bar) 2500
 
 
 

GQ process gas blowers are ideal for use in steel plants for the compression of process, cooling, and seal gas. These blowers are often used as 2-stage units and are up to the most extreme challenges.

Applications

Especially used in direct reduction plants for conveying of process- and cooling gas. Operating pressure range up a maximum pressure of 2.5 bar where the medium has the corresponding inlet pressure. Max. pressure difference 1100 mbar.

Especially used in direct reduction plants for conveying of process- and cooling gas. Operating pressure range up to max. pe=6 bar where the medium has the corresponding inlet pressure. Max. pressure difference 1500 mbar.

Design features

Housing compression-proof for PN 2,5. Cylinder with noise reducing chamber on the discharge side, housing with connections for water injection - and water flushing, as well as for lubrication - and purge oil supply systems.

Housing compression-proof for PN 6 (only GQ 20f20 and GQ 21.21). Cylinder with noise reducing chamber on the discharge side, housing with connections for water injection - and water flushing, as well as for lubrication - and purge oil supply systems.

Shaft sealings

Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals.
Drive shaft is sealed by 3 radial seal rings.

Direction of flow

Horizontal, selective to the left or to the right

Drive

Either via flexibly coupled spur gear or direct coupling with drive motor. Via flexibly coupled spur gear.


GQ process gas blowers are ideal for use in steel plants for the compression of process, cooling, and seal gas. These blowers are often used as 2-stage units and are up to the most extreme challenges.

Applications

Especially used in direct reduction plants for conveying of process- and cooling gas. Operating pressure range up a maximum pressure of 2.5 bar where the medium has the corresponding inlet pressure. Max. pressure difference 1100 mbar.

Especially used in direct reduction plants for conveying of process- and cooling gas. Operating pressure range up to max. pe=6 bar where the medium has the corresponding inlet pressure. Max. pressure difference 1500 mbar.

Design features

Housing compression-proof for PN 2,5. Cylinder with noise reducing chamber on the discharge side, housing with connections for water injection - and water flushing, as well as for lubrication - and purge oil supply systems.

Housing compression-proof for PN 6 (only GQ 20f20 and GQ 21.21). Cylinder with noise reducing chamber on the discharge side, housing with connections for water injection - and water flushing, as well as for lubrication - and purge oil supply systems.

Shaft sealings

Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals.
Drive shaft is sealed by 3 radial seal rings.

Direction of flow

Horizontal, selective to the left or to the right

Drive

Either via flexibly coupled spur gear or direct coupling with drive motor. Via flexibly coupled spur gear.


Interested in this product?
Call 020 8502 8100
OR
 
 
 
Enquire
 


Related entries

  • Aerzen Machines Ltd: Performance³ - the next generation
    Performance³ - the next generation
    Aerzen Machines Ltd
    Biological activation accounts for up to 80% of a wastewater treatment plant’s total energy requirements. Aerzener Maschinenfabrik has set itself the task of discovering hidden energy potentials in aeration to improve its...

Also by Aerzen Machines Ltd

Aerzen Machines Ltd address and contact details

Aerzen Machines Limited
Aerzen Machines Limited
Langston Road
Loughton
IG10 3SL
Tel: 020 8502 8100
Fax: 020 8502 8102
View on map - 3 addresses
 
Follow Aerzen Machines Ltd
 
Not found what you're looking for? View other options

Ask Aerzen Machines Ltd about

Series GQ positive displacement blowers for process gas