Type Positive displacement blowers
Media blown Air
Neutral gases
Process gases
Dirty / waste gases
Aggressive gases
Operation Oil free
Minimum flow capacity (m3/h) 110
Maximum flow capacity (m3/h) 15570
 
 
 

AERZEN blowers with canned drive are designed for the conveyance of neutral (HM design) and aggressive (CM design) gases and are used in industrial high-vacuum.technology. This series is characterised by impressive levels of efficiency and high reliability.

CM version for aggressive gases

  • The AERZEN CM series, with a total of 14 sizes, covers theoretical intake volume flows from 110 m³/h to 15,340 m³/h and pressure ranges up to 10^-5 mbar abs. The advantages at a gance:
  • ATEX-certification for zone 0 (internal)
  • Optimum selection possibilities by 4 different motor variants
  • High mechanical load (up to 150 mbar) and therefore, decrease of pump-down periods
  • Only little consumptions of water, nitrogen and oil
  • Appropriate for the application under clean-room conditions
  • Big control range by means of frequency converter from 1.450 to 7.400 rpm resp. from 1.240 to 2.900 rpm
  • Vertical and horizontal conveying direction possible

HM version for neutral gases

  • With 9 sizes of type HM, AERZEN also covers the theoretical intake volume flow from 406 m³/h to 15,570 m³/h up to a vacuum of 10^-5 mbar abs. The advantages at a gance:
  • Optimal selection possibilities by 4 motor variants
  • High mechanical strength (up to 230 mbar in case of HM) und consequently considerable reduction of pumping down times
  • Low water, nitrogen consumption
  • Suitable for application under clean room conditions
  • Large control range by means of frequency converter with proven parameters tuned to the Aerzen Canned Motor Blowers
  • Vertical and horizontal direction of flow possible

Applications

  • Semiconductor industry
  • Micro-electronics
  • Production of flat screens
  • Laser technology
  • Solar technology
  • Helium leak indicating units
  • Chemical process technology
  • Foil and glass coating
  • Manufacture of melting furnaces
  • Evacuation of hydrogen


AERZEN blowers with canned drive are designed for the conveyance of neutral (HM design) and aggressive (CM design) gases and are used in industrial high-vacuum.technology. This series is characterised by impressive levels of efficiency and high reliability.

CM version for aggressive gases

  • The AERZEN CM series, with a total of 14 sizes, covers theoretical intake volume flows from 110 m³/h to 15,340 m³/h and pressure ranges up to 10^-5 mbar abs. The advantages at a gance:
  • ATEX-certification for zone 0 (internal)
  • Optimum selection possibilities by 4 different motor variants
  • High mechanical load (up to 150 mbar) and therefore, decrease of pump-down periods
  • Only little consumptions of water, nitrogen and oil
  • Appropriate for the application under clean-room conditions
  • Big control range by means of frequency converter from 1.450 to 7.400 rpm resp. from 1.240 to 2.900 rpm
  • Vertical and horizontal conveying direction possible

HM version for neutral gases

  • With 9 sizes of type HM, AERZEN also covers the theoretical intake volume flow from 406 m³/h to 15,570 m³/h up to a vacuum of 10^-5 mbar abs. The advantages at a gance:
  • Optimal selection possibilities by 4 motor variants
  • High mechanical strength (up to 230 mbar in case of HM) und consequently considerable reduction of pumping down times
  • Low water, nitrogen consumption
  • Suitable for application under clean room conditions
  • Large control range by means of frequency converter with proven parameters tuned to the Aerzen Canned Motor Blowers
  • Vertical and horizontal direction of flow possible

Applications

  • Semiconductor industry
  • Micro-electronics
  • Production of flat screens
  • Laser technology
  • Solar technology
  • Helium leak indicating units
  • Chemical process technology
  • Foil and glass coating
  • Manufacture of melting furnaces
  • Evacuation of hydrogen


Interested in this product?
Call 020 8502 8100
OR
 
 
 
Downloads
 
 
 
Enquire
 


Related entries

  • Aerzen Machines Ltd: Performance³ - the next generation
    Performance³ - the next generation
    Aerzen Machines Ltd
    Biological activation accounts for up to 80% of a wastewater treatment plant’s total energy requirements. Aerzener Maschinenfabrik has set itself the task of discovering hidden energy potentials in aeration to improve its...

Also by Aerzen Machines Ltd

Aerzen Machines Ltd address and contact details

Aerzen Machines Limited
Aerzen Machines Limited
Langston Road
Loughton
IG10 3SL
Tel: 020 8502 8100
Fax: 020 8502 8102
View on map - 3 addresses
 
Follow Aerzen Machines Ltd
 
Not found what you're looking for? View other options

Ask Aerzen Machines Ltd about

AERZEN canned positive displacement motor blower