Product code FLi-485
Media detected Process liquids
Water
Industrial applications Enclosures
Equipment
Pipes
Tanks
Building applications Plant rooms
Components Sensors
 
 
 

The Aqualarm FLi-485 Liquid Level Detector is made up of two components, the detector module and the float switch, connected together via a 1m jumper cable. Both the detector module and the float switch are manufactured from STAREX General ABS (SD-0150) plastic. The glass filled nylon float switch is held in place by a sprung clip, secured to the wall at the level desired for the alarm to be activated. The red LED on the detector module will glow to indicate the alarm has activated. Alarm status and monitoring is via a single RS485 link to an i-Zone Mini control panel.

Key features

  • For use within Sumps, Plant rooms, & Water tanks.
  • Can be set to alarm on the rise or fall of water.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Float switch held in place by sprung clip.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • For connection to an i-Zone Mini control panel.

Specifications

  • Normal operating voltage: 12 volts d.c
  • Quiescent Current: <10mA. per detector.
  • Alarm Current: <100mA. per detector.
  • Detector Oscillator frequency: 6kHz
  • Voltage to Float Switch: 2 volts a.c.
  • Recommended interconnecting cable: 4 Core Cable 22AWG / Screened Twisted Pair / Belden Ref 8723
  • Line-out voltage drop: 1.5mV/m.
  • Approvals: BS EN ISO 9001:1994 / EMC Directive 89/336/EEC

Dimensions

  • Module Dimensions

Height: 45mm
Width: 70mm
Length: 135mm

  • Detector Dimensions

Height: 65mm
Width: 55mm


The Aqualarm FLi-485 Liquid Level Detector is made up of two components, the detector module and the float switch, connected together via a 1m jumper cable. Both the detector module and the float switch are manufactured from STAREX General ABS (SD-0150) plastic. The glass filled nylon float switch is held in place by a sprung clip, secured to the wall at the level desired for the alarm to be activated. The red LED on the detector module will glow to indicate the alarm has activated. Alarm status and monitoring is via a single RS485 link to an i-Zone Mini control panel.

Key features

  • For use within Sumps, Plant rooms, & Water tanks.
  • Can be set to alarm on the rise or fall of water.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Float switch held in place by sprung clip.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • For connection to an i-Zone Mini control panel.

Specifications

  • Normal operating voltage: 12 volts d.c
  • Quiescent Current: <10mA. per detector.
  • Alarm Current: <100mA. per detector.
  • Detector Oscillator frequency: 6kHz
  • Voltage to Float Switch: 2 volts a.c.
  • Recommended interconnecting cable: 4 Core Cable 22AWG / Screened Twisted Pair / Belden Ref 8723
  • Line-out voltage drop: 1.5mV/m.
  • Approvals: BS EN ISO 9001:1994 / EMC Directive 89/336/EEC

Dimensions

  • Module Dimensions

Height: 45mm
Width: 70mm
Length: 135mm

  • Detector Dimensions

Height: 65mm
Width: 55mm


 
 
 
Downloads
 
 
 
Enquire
 
Not found what you're looking for? View other options