Product name IRDI-485
Media detected Oil
Industrial applications Enclosures
Equipment
Machinery
Pipes
Pumps
Tanks
Valves
Building applications Plant rooms
Type Point loss
Components Sensors
 
 
 

The IRDi-485 point-of-use oil detector is made up of two components, the detector module and the Point of Use Detector, connected together via a 1m jumper cable. Both the Detector Module and the Point of Use detector shall be manufactured from STAREX General ABS (SD-0150) plastic. The Detector Module houses the electronic circuitry and the Point of Use detector houses the Infra-Red transmitter / receiver, which extends from the bottom of the Detector. A reflective area (50mm diameter) must be painted on the floor with paint capable of reflecting light. (e.g. standard white gloss paint). The jumper cable is connected to the top of the Point of Use Detector via a 3-pin plug & socket. A red LED will glow to indicate an alarm condition. Alarm status and monitoring is via a single RS485 link to an i-Zone Mini control panel. A stabilizing bar, or PC-3 protection cover, is required, as a means of fixing the Point of Use detector to the floor surface.

Key features

  • For use within Plant rooms and other solid floor areas.
  • For detection of Oil and other non-conductive liquids.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • Multiple types of protection covers are available to prevent mechanical damage.
  • For connection to an i-Zone Mini control panel.

Specifications

  • Normal operating voltage: 12 volts d.c
  • Quiescent current: <10mA. per detector.
  • Alarm current: <100mA. per detector.
  • Detector oscillator frequency : 6kHz
  • Infra-red probe type: Gallium arsenide
  • Recommended interconnecting cable: 4 Core Cable 22AWG / Screened Twisted Pair / Belden Ref 8723
  • Line-out voltage drop: 1.5mV/m.
  • Approvals: BS EN ISO 9001:1994 / EMC Directive 89/336/EEC

Dimensions

  • Module dimensions

Height: 45mm
Width: 70mm
Length: 135mm

  • Detector dimensions

Height: 65mm
Width: 55mm


The IRDi-485 point-of-use oil detector is made up of two components, the detector module and the Point of Use Detector, connected together via a 1m jumper cable. Both the Detector Module and the Point of Use detector shall be manufactured from STAREX General ABS (SD-0150) plastic. The Detector Module houses the electronic circuitry and the Point of Use detector houses the Infra-Red transmitter / receiver, which extends from the bottom of the Detector. A reflective area (50mm diameter) must be painted on the floor with paint capable of reflecting light. (e.g. standard white gloss paint). The jumper cable is connected to the top of the Point of Use Detector via a 3-pin plug & socket. A red LED will glow to indicate an alarm condition. Alarm status and monitoring is via a single RS485 link to an i-Zone Mini control panel. A stabilizing bar, or PC-3 protection cover, is required, as a means of fixing the Point of Use detector to the floor surface.

Key features

  • For use within Plant rooms and other solid floor areas.
  • For detection of Oil and other non-conductive liquids.
  • Manufactured from rust proof and hard wearing ABS plastic.
  • Two component design – keeping head and electronic module separate.
  • LED & internal alarm sounder in module to give local alarm indication.
  • Multiple types of protection covers are available to prevent mechanical damage.
  • For connection to an i-Zone Mini control panel.

Specifications

  • Normal operating voltage: 12 volts d.c
  • Quiescent current: <10mA. per detector.
  • Alarm current: <100mA. per detector.
  • Detector oscillator frequency : 6kHz
  • Infra-red probe type: Gallium arsenide
  • Recommended interconnecting cable: 4 Core Cable 22AWG / Screened Twisted Pair / Belden Ref 8723
  • Line-out voltage drop: 1.5mV/m.
  • Approvals: BS EN ISO 9001:1994 / EMC Directive 89/336/EEC

Dimensions

  • Module dimensions

Height: 45mm
Width: 70mm
Length: 135mm

  • Detector dimensions

Height: 65mm
Width: 55mm


 
 
 
Downloads
 
 
 
Enquire
 
Not found what you're looking for? View other options