Product name Force Gage PCE-DFG N 10K
Product code PCE-DFG N 10K
Suitability Manufactured products
 
 
 

The force gage measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gage is supplied with an external measuring cell. Depending on the model, the force gage can measure up to 10,000 N / 2,248 lbs. Models for 1,000 N / 225 lbs, 2,500 N / 562 lbs and 5,000 N / 1,124 lbs are still available. Various eyelets or hooks with M10 or M12 thread can be adapted to the measuring cells, but your own devices with this thread can be mounted on the measuring cell.

The force gage is equipped with a USB interface. This interface makes it possible to read the measurement data into the PC software. This makes it possible to create measurement logs and save and export them. The force gage has a graphic LCD that displays the measured values ??both numerically and graphically. Furthermore, the force measuring device is protected to IP54 and can therefore also be used in harsh industrial environments, as well as train and pressure tests can be carried out outdoors in bad weather conditions easily.

Various force test stands are available for adaptation to the force gage. The internal memory and the included hooks, extensions and tips complete the performance of this force gage. A special feature of the PCE-DFG N force gage is that the measuring cells are interchangeable among the models. By entering the sensitivity in mV / V, all measuring cells can be used with just one handheld device.

Key Features

  • USB interface
  • Graphic display
  • Fast response time
  • PC software
  • Store 100 readings internally or unlimited to PC
  • Measuring cells easily changeable

Technical Specification

  • Measuring range - 0 ... 10,000 N / 0 ... 2,248 lbs
  • Resolution - 5 N / 1.12 lbs
  • Accuracy  - ± 0.1% of the measuring range
  • Measurement units - N, kg, lb, KPa
  • Display - 2.8" TFT graphic display
  • Alarm Modes - Inside, Outside, Crack, Shutdown
  • Sampling rate - 6 ... 1600 Hz
  • Storage - 100 measurements
  • Power supply - NiMH battery, 6V / 1600-mAh
  • Battery life - About 10 hours
  • Power adapter / charging adapter - 12V / 1A
  • Outputs - Interface: USB / Switching output: 12V / 50-mA
  • Protection class - IP 54
  • Operating and storage conditions - -10 ... 50°C / 14 ... 122°F / 5 ... 95% rh non-condensing

Mounting thread Measuring cell

  • up to 1,000 N / 225 lbs - M10
  • 2,500 ... 10,000 N / 562 ... 2,248 lbs - M12
  • Dimensions - 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7
  • Weight - 540 g / 1.2 lbs


The force gage measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gage is supplied with an external measuring cell. Depending on the model, the force gage can measure up to 10,000 N / 2,248 lbs. Models for 1,000 N / 225 lbs, 2,500 N / 562 lbs and 5,000 N / 1,124 lbs are still available. Various eyelets or hooks with M10 or M12 thread can be adapted to the measuring cells, but your own devices with this thread can be mounted on the measuring cell.

The force gage is equipped with a USB interface. This interface makes it possible to read the measurement data into the PC software. This makes it possible to create measurement logs and save and export them. The force gage has a graphic LCD that displays the measured values ??both numerically and graphically. Furthermore, the force measuring device is protected to IP54 and can therefore also be used in harsh industrial environments, as well as train and pressure tests can be carried out outdoors in bad weather conditions easily.

Various force test stands are available for adaptation to the force gage. The internal memory and the included hooks, extensions and tips complete the performance of this force gage. A special feature of the PCE-DFG N force gage is that the measuring cells are interchangeable among the models. By entering the sensitivity in mV / V, all measuring cells can be used with just one handheld device.

Key Features

  • USB interface
  • Graphic display
  • Fast response time
  • PC software
  • Store 100 readings internally or unlimited to PC
  • Measuring cells easily changeable

Technical Specification

  • Measuring range - 0 ... 10,000 N / 0 ... 2,248 lbs
  • Resolution - 5 N / 1.12 lbs
  • Accuracy  - ± 0.1% of the measuring range
  • Measurement units - N, kg, lb, KPa
  • Display - 2.8" TFT graphic display
  • Alarm Modes - Inside, Outside, Crack, Shutdown
  • Sampling rate - 6 ... 1600 Hz
  • Storage - 100 measurements
  • Power supply - NiMH battery, 6V / 1600-mAh
  • Battery life - About 10 hours
  • Power adapter / charging adapter - 12V / 1A
  • Outputs - Interface: USB / Switching output: 12V / 50-mA
  • Protection class - IP 54
  • Operating and storage conditions - -10 ... 50°C / 14 ... 122°F / 5 ... 95% rh non-condensing

Mounting thread Measuring cell

  • up to 1,000 N / 225 lbs - M10
  • 2,500 ... 10,000 N / 562 ... 2,248 lbs - M12
  • Dimensions - 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7
  • Weight - 540 g / 1.2 lbs


 
 
 
Downloads
  • Force Gage PCE-DFG N 10K Data Sheet
    Force Gage PCE-DFG N 10K Data Sheet
    2pp 102.35KB
    Download
 
 
 
Enquire
 

Also by PCE Instruments UK Ltd

PCE Instruments UK Ltd address and contact details

PCE Instruments UK Limited
Unit 11
South Point Business Park
Ensign Way
Southampton
SO31 4RF
Tel: 023 8098 7030
Fax: 023 8098 7039
View on map - 2 addresses
 
Follow PCE Instruments UK Ltd
 
Not found what you're looking for? View other options