Applications Wastewater
Filter material PVC
 
 
 

BIOdek® FB 33.07 vertical flow fill is used in wastewater treatment applications. It is suitable for strongly polluted, high-load water in trickling filters, and for carbonaceous oxidation in submerged biological treatment.

It is reliable, limiting the accumulation of solids and thick biofilms, and provides optimum solids discharge and low pressure drop due to vertical channels and open interfaces within the fill media.

BIOdek® has a self-supporting structure with a high load-bearing capacity with variable sheet thicknesses.

BIOdek® FB 33.07 vertical flow fill is made of UPVC. It is easy to clean, and is resistant to most chemicals, bacteria and UV, so provides a long service life.

Technical data:

  • Specific surface area: 140m2/m3
  • Corrugation height: 33/7mm
  • Max length: 2400mm
  • Max width: 900mm
  • Height: 600mm
  • Max application temp: 60°C
  • Void ratio: >97%


BIOdek® FB 33.07 vertical flow fill is used in wastewater treatment applications. It is suitable for strongly polluted, high-load water in trickling filters, and for carbonaceous oxidation in submerged biological treatment.

It is reliable, limiting the accumulation of solids and thick biofilms, and provides optimum solids discharge and low pressure drop due to vertical channels and open interfaces within the fill media.

BIOdek® has a self-supporting structure with a high load-bearing capacity with variable sheet thicknesses.

BIOdek® FB 33.07 vertical flow fill is made of UPVC. It is easy to clean, and is resistant to most chemicals, bacteria and UV, so provides a long service life.

Technical data:

  • Specific surface area: 140m2/m3
  • Corrugation height: 33/7mm
  • Max length: 2400mm
  • Max width: 900mm
  • Height: 600mm
  • Max application temp: 60°C
  • Void ratio: >97%


Interested in this product?
Call 0845 003 9114
OR
 
 
 
Downloads
  • PLASdek® / BIOdek® vertical flow fills
    PLASdek® / BIOdek® vertical flow fills
    2pp 556.42KB
    Download
 
 
 
Enquire
 


Related entries

  • 2H Water Technologies: PLASdek® vertical-flow fills
    PLASdek® vertical-flow fills
    2H Water Technologies
    2H PLASdek® vertical-flow fills are designed for the use in counterflow cooling towers with poor water quality. Bearing capacity and weight/m3 depend on sheet thickness. It will be selected according to customer...
  • 2H Water Technologies: BIOdek beats activated sludge on cost & energy reduction
    BIOdek beats activated sludge on cost & energy reduction
    2H Water Technologies
    There are times when changing your mind is a very good thing. Take the last-minute decision made by a wastewater treatment plant in Managua, Nicaragua, to install a BIOdek™ plastic media trickling filter system. The plant...

Also by 2H Water Technologies

2H Water Technologies address and contact details

Enexio UK Ltd
Unit 6 Prospect Court
Courteenhall Road
Bilsworth
Northampton
NN7 3DG
Tel: 0845 003 9114
Fax: 0845 003 9115
View on map
 
 
Not found what you're looking for? View other options

Ask 2H Water Technologies about

BIOdek® FB 33.07 vertical flow fills