Process liquid transfer & flow control

The Series 2100 Suction Demand Valve (SDV) is designed for the dosing industry to hydraulically isolate a metering pump from its bulk supply tank. This isolation prevents variations in suction pressure caused by changes in tank liquid levels, supporting consistent pump accuracy. By maintaining dosing accuracy, the valve reduces wastage of primary

GEMÜ R481 Victoria is a soft-seated metal butterfly valve with a metal actuator, designed for pneumatic operation in flow control applications. Made from SG iron with epoxy coating, it supports wafer, lug and U-section body types, and suits a wide range of pipe standards and sizes from DN 25 to 600. Suitable for use with various liner and disc

Althon Inline Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. The Alton Inline Penstock is for Isolation Inline with a Pipe system. The Althon Inline Penstock is guaranteed to a Maximum Pressure of 10MwC as the Penstock has been tested up to

Althon 375mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 375mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon medium duty penstocks can be used in surface, sewer and process water applications. They are a simple and highly effective way to prevent water backflow into a system. Althon medium duty penstocks have been developed for the majority of situations where a penstock is required. Medium duty penstocks are suitable for sealing pressures of 5MwC

The M-Block plastic multi-port valve block combines several valves and pipe sections in one compact unit. It can perform various functions for complex tasks in plant engineering while offering a host of benefits. Compared to conventional designs, the block solution has a smaller footprint as it requires a smaller number of pipework/fittings and connection points

Althon 1000mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 1000mm; suitable for factory or retrofit to precast concrete

Althon 400mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 400mm diameter. Althon provide their ductile iron flap valves with stainless steel

Verdermag GLMD magnetic coupled pumps are medium capacity magnetic-drive pumps, used for concentrated chemicals including acids (such as hydrochloric acid, sulphuric acid, nitric acid, phosphoric acid) and bases (such as sodium hydroxide, potassium hydroxide etc), ranging from virtually zero to full concentration. Application areas include the

Althon 500mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 500mm; suitable for factory or retrofit to precast concrete

The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally

Butterfly Valve 565 controls fluid in water and water treatment systems. Made from corrosion-resistant plastics, it is lightweight, suitable for both wafer and lug-style installations, and matches the installation length of metal valves. Designed for easy handling, low maintenance and high durability, it supports a range of water applications

Fish Friendly Screw Pumps are designed for low-head water movement, transferring water gently with minimal turbulence. Specially shaped impellers allow safe fish passage, supporting aquatic biodiversity. Pumps handle water with debris and solids, reducing blockages compared to submerged types. Variable speed drives improve energy efficiency and

Pneumatically-actuated tank bottom valve designed for sterile applications. The sealing principle of the valve is based on the GEMÜ PD sealing technology, which hermetically separates the actuator from the medium. All actuator parts (except the sealing and design elements) are made from stainless steel. Solutions can be adapted to the application

The Althon 1200mm HDPE Penstock, designed for use with 1200mm pipework, is suitable for surface, sewer, and water process applications. Made from HDPE and grade 316L stainless steel, it has a 50-year design life and is built to handle sealing pressures of 5MwC. The penstock requires minimal maintenance and is easy to install. Typically available

The GEMÜ 567 BioStar is a diaphragm globe control value designed for precision flow and dosing in aseptic applications, including biotechnology, food, beverage and pharmaceuticals industries. Typical uses include the control of sterile steam and air, feed and discharge control in bioreactors, and dosing of liquids and gases

Designed for pipework up to 250mmm, the ASA Manhole & Flow Control Penstock is suitable for installation in manhole and flow control chambers: size: 250mm; fixing type: wall-mounted; materials: HDPE, stainless steel 316, EPDM, POM; working pressure: 5.0MwC on/off. Althon flow control penstocks are T-key operated with a non-rising spindle. Spindle

Althon PTK-F flange mounted flap valves are made from HDPE and designed for flow control and flood prevention, suitable for installation both below and above the waterline. Hung at a 10 degree angle for a watertight seal, these valves handle water pressures up to 5 MWC for 72 hours and 1 MWC for 50 years. Flange connections can be specified to

The Althon 600mm HDPE Penstock, designed for use with 600mm pipework, is suitable for surface, sewer, and water process applications. Made from HDPE and grade 316L stainless steel, it has a 50-year design life and is built to handle sealing pressures of 5MwC. The penstock requires minimal maintenance and is easy to install. Typically available

Althon PTK-P Pipe Mounted HDPE Flap Valves are made from high-density polyethylene and designed for mounting directly onto pipework above or below the waterline. Suitable for water pressures up to 5 MWC for 72 hours and 1 MWC for 50 years, valves are lightweight, easy to install, and available for pipe sizes from 110mm to 630mm, with larger sizes

Pneumatically-operated 2/2-way globe valve with proven GEMÜ globe valve sealing principle and innovative modular linear actuator. Available in angle seat and straight seat versions. Visual indicator and sight glass as standard available. Simple assembly of automation and drive modules thanks to standardised interface. The anti-rotation lock in the

Screw Compactors & Grinders from MSE Hiller are machines for shredding, grinding, and dewatering process flows such as abattoir waste, digestate, slurries, and various industrial materials. MAS Filter Screw compacting screens come in filter sizes from 150 µm to 12 mm, with fixed or mobile units and a 2.2 kW drive, handling 1 to 100 m³/hr based on

Althon 250mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 250mm diameter. Althon provide their ductile iron flap valves with stainless steel

The compact Type 582 pressure reducing valve reduces the line pressure to a set value on the valve outlet. The outlet pressure is in no direct relation to the inlet pressure. Independent of raising or falling inlet pressure the outlet pressure stays largely constant. Suitable for neutral and aggressive media with low number of particles / solids