Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Materials storage
(247)
Materials storage on Enviropro. Helping you find the best solution for your project.
Materials storage - helping you find the best solution for your project.
BYELAW 30 GRP insulated water tanks
Byelaw 30 Water Tanks are insulated cold water storage tanks for domestic and commercial use, made from WRAS Approved materials and designed to meet UK water regulations for potable water: insulated cold water storage tanks for potable water meeting UK regulations; screened overflow, vent, and warning pipe fittings help prevent ingress of insects
F&E insulated GRP water storage tanks
Manufactured with GRP resins that are designed to withstand water temperatures up to 90°C. Finished with a Gelcoat internal surface to prevent bacterial growth, helping to keep the water as clean and fresh as possible. Insulation is encapsulated into the tank walls and lid, making the external finish cleaner. Supplied with a flange around the top- PRODUCT
Drayton Tank & Accessories
Balance Tanks
One Piece GRP Balance Tanks and Two Piece GRP Balance Tanks are water storage units made from glass reinforced plastic, designed for balancing water levels in systems such as swimming pools. Available as single-piece or two-piece models, these tanks suit a range of installation spaces and capacities: water storage tanks made from glass reinforced- PRODUCT
Drayton Tank & Accessories
Open-top GRP water storage tanks
Open-top GRP water storage tanks, suitable for cold water: self-supported walls; tank only needs flat base to sit on; standard sizes: 1,000 to 2,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
GRP sectional water tanks
GRP sectional tanks are used for storing many different types of liquid including potable water, hot water, rainwater, chemicals, waste, grey water and sewage. They range from 45 to 90,000 litres and can be up to 3m high, with no restriction on length and width. 1000 x 1000mm panels are standard, with specific sizes available on request. Tanks can
One piece GRP feed and expansion tanks
One piece GRP Feed and Expansion storage tanks tanks are supplied with bolted lids and foam lid sealers and are suitable for storing water upto 90 Deg C; insulated walls can be 25mm, 50mm or 75mm; standard sizes: 45-6,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
One piece GRP water storage tanks
GRP One Piece insulated cold water storage tank, complete with bolted lid and access hatch: one piece GRP water storage tanks; suitable for cold water, drinking water also known as potable water; standard sizes: 45-100,000 litres; tanks are supplied with bolted lids and foam lid seal between the tank and lid; bespoke sizes also available- PRODUCT
Drayton Tank & Accessories
Type AB air gap break tanks
Type AB Air Gap Water Tanks are used to store the volume of water displaced from people in a pool or spa, this is then pumped back into the pool when people leave: insulated water storage tanks with Type AB air gap for backflow prevention; insulated walls: 25mm, 50mm or 75mm; standard sizes: 45-100,000 litres in one piece balance tank design- PRODUCT
Drayton Tank & Accessories
Circular polyethylene (MDPE) storage tanks (50-200 ltr)
Tanks are produced from food grade medium density polyethylene. They are offered in opaque white with volume measurements moulded into the side of the tank. Tanks are supplied with screwed caps and are suitable for cold water and a range of chemicals: made from food grade virgin (MDPE) medium density polyethylene; suitable for storing water and a- PRODUCT
Drayton Tank & Accessories
MT mix tanks
Siltbuster offers the MT range of mix tanks, which are available on a sale or hire basis. The mix tanks are typically used in conjunction with Siltbuster's dosing skids, containerised dosing systems, clarifiers or DAF treatment systems. The tanks can be provided either as a stand-alone unit or as part of a complete water treatment package
GRP water break tanks
Break tanks play a crucial role in maintaining a reliable water supply in various systems. By storing a reserve of water, they help ensure that pumps can operate effectively without interruption. They also act as a buffer when the mains supply struggles to meet peak demand, preventing pressure drops and ensuring consistent flow: insulated water- PRODUCT
Drayton Tank & Accessories
V-notch weir tank
V-notch weir tanks manufactured by Smart Storm come complete with integral sensor bracket and steel reinforced bands: standard sizes: 0-10; 0-40L/s; bespoke sizes can be custom-made on request; all tanks come with a 90 or 150mm stub inlet and outlet; other sizes can be accommodated; fully compliant to BS3680 and ISO 1438 standards. trade effluent
GRP insulated hot water and chemical storage tanks
One-piece GRP pre-insulated chemical storage tanks are supplied with insulated bolted lids with foam seals. Insulated walls can be 25 or 50mm thick (75 or 100mm on request). Ideal for most chemicals and hot water up to 120°. Used for condensation tanks, thermal stores, acid tanks and much more. Standard sizes: 45-100,000 litres; bespoke sizes available- PRODUCT
Drayton Tank & Accessories
One-piece GRP pre-insulated water storage tanks
One-piece tanks are available in standard sizes from 45 to 100,000 litres. Special sized tanks can also be made up to a maximum width of 3000mm, height of 2500mm, and length up to 14000mm. They are suitable for cold water storage up to 30°C. Drayton also offers tanks that can hold water up to 70°C constant (F&E tanks) and up to 100°C (chemical- PRODUCT
Drayton Tank & Accessories
Two-piece GRP insulated water storage tanks
Two-piece tanks are designed for restricted access projects. Standard two-piece tanks are designed to fit through a standard 66 x 29" doorway. They have a smooth interior surface for easy cleaning and are resistant to bacteria, meaning low-cost maintenance. An inspection hatch is supplied on all tanks over 200 gallons. Standard two-piece tanks are
- ELIQUO HYDROK's CWF technology offers an efficient and cost-effective alternative to the normal tipping bucket where storm tank cleaning is required. A traditional tipping bucket continually drip fills until it reaches tipping point to flush on a continuous cycle throughout the year. The CWF will only operate when it needs to, immediately after a
- PRODUCT
- ELIQUO HYDROK
- Stainless steel tanks are ideal for water and wastewater applications, due to the inherent corrosion resistance of stainless steel, depending on the grade of steel used. Without the need for any further protection, stainless steel tanks give robust, long-term service with the added benefit of an excellent recycling value when the tank is no longer
- PRODUCT
- Goodwin Tanks
- The Big One 125,000 litre tank is constructed from mild steel and is epoxy lined, making it suitable for storing a wide variety of liquids. It is available on long- or short-term hire and can be delivered at short notice. It features non-skid stairways, fold flat handrails, and quick release manways. It is supplied with slings and shackles. Tanks
- RDL's Easifit liner system for corrugated water storage tanks features a reinforced rubber strip at the top of the liner wall, with a double row of holes to correspond with the bolt pattern in the rim of the corrugated water storage tank. The top of the storage tank is fitted with a protection strip of a half inch capping before the liner is
- PRODUCT
- Russetts Developments
- Enduratank sump tanks are heavy-duty tanks commonly used in agriculture and in the liquid transport industry. The range includes WRAS approved tanks for drinking water. They incorporate a unique pin mounting system for mounting securely to the vehicle without the need of steel mounting straps. Enduratank sump tanks are used by many of the UK leading trailer manufacturers
- Enduratank vertical, cylindrical, polyethylene industrial tanks are suitable for the storage of liquids with specific gravity of 1.5-2.0. Constructed from food-grade polyethylene, they are durable and are finished with a smooth interior to protect against the growth of algae and bacteria and allow easy cleaning. All tanks can be supplied as WRAS approved
- The VTC thermostatic storage tanks is manufactured using either polypropylene or high density polyethylene (HDPE). Both materials offer a high degree of chemical resistance to a wide range of chemical products. VTC tanks have conical bases with integral supporting skirts and centre outlets for complete drainage with capacities ranging from 225 to
- Enduratank baffled slimline tanks are rectangular polyethylene tanks ideal for applications requiring a water tank capable of being installed in a pickup or van. They are suitable for both potable (WRAS approved tanks) and non-potable water, and for the storage of chemicals with specific gravity up to 1.5. Internal baffles prevent sloshing and increase stability during transport
- Salt saturators are made from corrosion-resistant GRP and provide a constant, controllable supply of saturated brine solution. They contain layers of graded gravel under a bed of salt, which is covered by a constant head of water. The water dissolves the salt and, filtering through the gravel, emerges as clean, saturated brine. Salt saturators are
