Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Sludge processing
(143)
Sludge processing for municipal and industrial wastewater treatment and biosolids management. Thickening and dewatering with centrifuges, belt and filter presses. Screening, maceration, mixing, pumping, and storage systems. Anaerobic digestion, thermal hydrolysis, pasteurisation, and lime stabilisation. Dryers, conveyors, polymer make-up and dosing for conditioning.
Sludge processing - helping you find the best solution for your project.
Plate and Frame filter presses for solid-liquid separation
Plate and frame filter presses use an alternating arrangement of solid filter plates and hollow frames to form chambers for solid-liquid separation. The slurry is pumped into the cavities created by the frames, where filter cake builds up while filtrate passes through the filter cloth and exits via channels within the plates. This simple
Mobile Rental Units - portable sludge dewatering systems for hire
MSE Hiller Mobile Rental Units are modern mobile sludge dewatering systems designed for temporary or long-term use at sewage works and industrial sites. Units are made for rapid installation, require no washwater during operation, and can be supplied with operators or staff training. Systems are available in a range of capacities and include
Membrane filter presses for high liquid extraction and solid separation
Membrane filter presses are designed to achieve significantly higher cake solids and lower residual moisture than conventional recessed chamber presses. By incorporating flexible membrane plates that inflate after the filtration stage, additional pressure is applied directly to the filter cake, extracting entrained liquid and producing drier
DecaPress DP664HD decanter centrifuge
The DecaPress DP664HD decanter centrifuge is a high-performance sludge dewatering centrifuge with a 50–100m3/hr capacity. Also available as a mobile test unit (known as Rosie
DecaPress DP84-362 - decanter centrifuge
The DecaPress DP84-362 decanter centrifuge with scroll comprises a rotating bowl, consisting of a feed pipe, a cylindrical section where the separation of the suspension takes place, and a conical section where the scroll removes the dewatered sludge, the housing enclosing the rotor, the base frame bearing rotor and housing, and the bowl and
Charlotte centrifuge test and demonstration rig
The Charlotte test and demonstration centrifuge rig gives customers the opportunity to conduct process performance trials on their materials at their site and confirm the operating costs, performance and potential savings during a “try before you buy” experience. This compact stand-mounted unit measures 3.9 x 1.3 x 2m, and is suitable for
DP66-422 mobile sludge dewatering units
MSE Hiller DP66-422 mobile sludge dewatering units are built to a high specification and incorporate a high level of process automation and control. They have capacities of up to 90 m3/hr. The mobile units are fitted with their own on-board progressing cavity feed pump, macerator, Endress+Hauser flowmeters, automatic liquid polymer make-up and
DecaPress® DP66-422 decanter centrifuge
The DecaPress® DP66-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
DecaFood® DF31-362S decanter centrifuge
The DecaFood® DF31-362S is for continuous food-fair separation of two-phase mixtures. The high rotational speeds accelerate the separation of a solid-liquid suspension where the specific density of the liquid is less than the specific density of the solid. Hygienic designs and systems complete with effective Cleaning in Place (CIP) systems make
Biobulk® CSTR - for anaerobic wastewater treatment
Continually stirred tank reactor (CSTR) for the anaerobic treatment of industrial effluents with significantly high amounts of suspended solids, including fats, oil and grease. Accommodates a medium organic loading capacity of 2-5kg COD/m3/day. Biogas produced as a byproduct can be used as an energy source- PRODUCT
Veolia Water Technologies UK
Recessed Filter Presses - industrial liquid-solid separation equipment
Recessed filter presses use a series of recessed filter plates to create chambers for solid -liquid separation. Recessed design provides reliable and cost effective solid-liquid separation. The recess can vary between 15mm – 50mm per filter plate: recessed chamber filter presses for reliable and economical solid-liquid separation. cost-effective
DecaThick® DT66-422 decanter centrifuge
The DecaThick®DT66-422 decanter centrifuge with backdrive provides sludge thickening. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
DecaPress® DP54-422 decanter centrifuge
The DecaPress® DP54-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
High speed disc stack separators for oil and water
Disc stack separators are mechanical units for cleaning water, hydraulic oils, fuel, and lube oils by removing solids up to 4% loading and particles as small as 0.5 micron. OSSO disc stack separators are made for industrial use, with flow rates from 900l/hr to 14400l/hr. Used globally in oil and gas, marine, and food and beverage sectors
Filter presses
The Siltbuster filter press range can rapidly be deployed to sites making them ideal for use on short term projects. They are also ideal for providing additional/emergency treatment capacity to support existing on-site dewatering facilities, either as a standalone solution or as part of a complete Siltbuster water treatment/dewatering package
Sophia test and demonstration centrifuge rig
Sophia is a test and demonstration centrifuge rig suitable for 30-60m3/hr. The rig gives customers the opportunity to conduct process performance trials on their materials at their site and confirm the operating costs, performance and potential savings during a “try before you buy” experience. Sophia is a 45-foot trailer-mounted unit
Complete dewatering plants - turnkey sludge water removal systems
MSE Hiller turnkey sludge dewatering systems are designed for industrial and municipal applications. Systems include macerators, feed pumps, pipework, conveyors, polymer dosing, process automation, electrical wiring, enclosures and remote monitoring, meeting current Health and Safety and CDM standards
Disc stack centrifuge sales and servicing
OSSO is a separation equipment sales, service and repair specialist. OSSO's team of mechanical, electrical, marine and control system engineers is expert in servicing and maintaining disk stack centrifuge systems. A rolling training programme ensures they are up-to-date with the current separation technology and are able to evaluate and optimise
Decasmart - containerised centrifuge systems for rapid on-site installation
Container-mounted Hiller centrifuges such as Model DP764, DP664 and DP574 Hiller Decapress plants are all available as standard built packaged plants, which means minimal on-site build time. MSE Hiller’s centrifuges have capacities from 20 to 135m3/hr, and can come pre-built into a complete Decasmart dewatering plant with all necessary equipment
DecaTec model D574 for demanding separation duties
DecaTec model D574 is ideally suited to both 2- and 3-phase separation duties and can be used in oil recovery applications in ATEX zone 1 and 2 as well as the maximum possible hygienic food grade production designs. The DecaTec series is based on decades of experience across various industries, combined with the goal of creating a model without
DecaPress DP573 with SEE-Drive control system
Used for the dewatering of sludge, the DecaPress DP573 is a decanter centrifuge with a scroll action: bowl length: 2145mm; total length: 4072mm; width: 1510mm; height: 1065mm; capacity: up to 50m3 per hour. switchable operating mode for local and remote operation; simple operation with plain text display; complete process visualisation; control
DecaPress DP664FD decanter centrifuge
The DecaPress DP664FD decanter centrifuge produces the highest possible separation results and has a capacity of 40-80m3/hr. High throughputs are combined with significantly reduced flocculant consumption which results in very high economic efficiency. The DecaPress is simple to adjust and is characterised - due to its rigid design – by stable
DecaPress DP764FD decanter centrifuge
The DecaPress DP764FD decanter centrifuge produces the highest possible separation results with a capacity of 70-130m3/hr. High throughputs are combined with significantly reduced flocculant consumption which results in very high economic efficiency. The DecaPress is simple to adjust and is characterised - due to its rigid design – by stable
DecaThick® DT37-422 decanter centrifuge
The DecaThick® DT37-422 decanter centrifuge provides sludge thickening. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low to medium scroll differential speeds scroll differential speeds
