Industrial filters

Modular microscreen for solids removal and product recovery. Offers a large filtering area in a small footprint for municipal effluent polishing and industrial water reuse. Previously known as the Hydrotech Discfilter, over 50 improvements make it longer lasting, better value and more efficient. Re-named the Hydrotech Performance Filter (HPF), its

Sentinel agrochemical water treatment plant is a UK-made system for treating and disposing of dilute pesticide waste and other pollutants from agricultural operations. Reduces contamination by over 99.9% so treated water can be safely discharged or reused. Units handle batch sizes from 250L to 2,000L and are factory tested for quick installation

Hydro International and Brightwork BV have partnered to combine UK water industry expertise with leading Dutch filtration innovation, delivering advanced tertiary treatment solutions that support smart, reliable, compliant and future-ready wastewater performance. The Brightwork MBF is an high-performance, moving bed media filtration system with

Colloide‘s dynamic sand filters are always on line, continually filtering the incoming water while continually backwashing a small portion of the sand bed. Dynamic sand filters have a high efficiency in removing fine solids. Maintenance is easy with an internal sand air-lift system. The feed water is fed into the filter at the base of the active

Colloide provides customised pressure filtration systems for a wide variety of applications, engineered to meet the specific performance requirements of individual water treatment plants. The filters are designed to allow a pressurised flow to pass through the filter and onwards to where the filtered water is required, ie the filter remains in

Rapid gravity filters offer a very robust and proven water purification solution with low operating and maintenance costs. They are commonly used as part of a multiple-stage treatment system. Each of Colloide's filters are engineered to meet the specific performance requirements of individual water treatment plants. The company has a wealth of

Colloide multi cell media filtration systems are based on standard proven design, adjusted to accommodate actual flows and plant hydraulics. The filters are available in both concrete and steel tanks. Generally require no bugger tanks for the inflow, outflow or backwashing: the filter is always on-line, therefore no redundancy in operation; when

Sand-Cycle® is a remote monitoring and control solution designed to improve the performance of continuous moving bed sand filters, reduce operational cost and make day-to-day operations easier. By using RFID tags mixed into the filter media, Sand-Cycle® tracks sand circulation as a direct indicator of filter health and performance. This data is

Hydroklear liquid filtration technologies and packages range from simplex sand filters to multiple banks of carbon filters and more sophisticated media. Hydroklear can provide basic controls or full treatment packages controlled from an HMI and PLC combination. Everything provided is based on proven technology. Flow rates: 0.5-150m3/hr

The TEKLEEN line of automatic self-cleaning water filters is designed to meet a wide range of water filtration needs. They are self-cleaning and operate on line pressure alone, eliminating the need for an external power source. As water passes through the water filter, the dirt particles are collected on the screen which causes a drop in water

Colloide designs and manufactures Deep Bed Sand Filters. Their unique filter under- drain system is designed to maximise efficiency and life span of the filters. Colloide filters are designed with a filter bed depth of between 1000—2000 mm, and the media is carefully selected with the correct size, uniformity coefficient, roundness and material

BOLLFILTER UK present our new Fully Automatic Filter aquaBoll® After 10 years of carefully consulting with Water Treatment and Sewage Plant operators, followed by 5 years of intensive product development, rigorous testing, patenting and finally global certification by 40 classification societies, BOLLFILTER UK proudly present the aquaBoll®. The

Self-cleaning filters have been protecting equipment from harmful solids in fluids for almost 100 years. 10 GA filters are used on all types of oil to remove unwanted particles, but they have been used on fluids ranging from water through to viscous resins, liquefied gases and high temperature steam. 10 GA self-cleaning filters work on the edge

PlastOk manufactures pressure vessels for vertical and horizontal pressure leaf filters. The filters are used for the filtration of vegetable oils, mineral oils, deodourised oils, bleached oils and process fluids, as well as polishing. The company undertakes the repair, remeshing and replacement of damaged leaves for all makes and models of

For more than 20 years Cadar have been supplying designs and component for our monolithic concrete ?lter ?oor system. The system is a “cast in-situ” design that becomes part of the surrounding civil structure. Unlike other suspended ?lter ?oor systems there is no risk of degradation or structural failure, that may lead to the requirement of a

Mecana pile cloth media filtration is used as a resilient pre-filtration solution to address the problems associated with algal blooms occurring in water extracted from surface water sources without using chemicals. ELIQUO HYDROK has the UK distribution

Cartridge filters are used for the clarification of process liquids containing small amounts of solids. Two sizes available: 10” large diameter blue filter cartridge housing 1” BSPF ports complete with mounting bracket & sump spanner. 20” large diameter blue filter cartridge housing 1” BSPF ports complete with mounting bracket & sump spanner

The Filtermat AC activated carbon filter uses granular activated carbon to reduce organic matter, tastes, odours, free chlorine and other oxidants from water supplies. A periodic automatic back-washing sequence expels captured particulate matter from the filter and re-grades the media bed, to maintain its efficiency. The vessel is manufactured

The latest Bollfilter 6.18.2 is a heavy-duty filter that requires no pre-screening. It can handle large solids and can cope with high solids loading. Features: Each element cleans twice per cycle. On-stream cleaning in seconds. Backflush using process fluid

The latest Bollfilter type BFD-P manual duplex filter is a special engineered solution for high specification applications. It can operate at high pressure and temperatures, and provides precise filtration. The fully bolted (non-welded) design removes the need for welding inspection. It features a built-in equalising line. The BFD-P is compliant

The Omnifiltration System is fully automatic in operation; the service and backwash cycles are controlled by diaphragm valves and a single electronic controller. The system has acquired a well-deserved reputation, thanks to its excellent performance, versatility and adaptability, which is certified by the hundreds of systems installed around the

Helapet inline disc filter capsules allow bespoke solutions for particle filtration, liquid clarification, equipment protection and sterile venting. By selecting bespoke media and connections, an unlimited range of filter options are made possible to fit any device. These filters provide a lightweight yet robust solution for a variety of

Gas analyser disc filters use a high performance media for high moisture retention whilst ensuring optimum flow rates. The filter also protects sensitive equipment from the ingress of particulates. Helapet's replaceable gas analyser disc filters are ideal for filtering carbon dioxide, oxygen, nitrogen and other compounds, improving quality through

The KS-Filter™ is a continuous backwashing sand filter suitable for tertiary effluent treatment, polishing and process applications. Simple to operate and maintenance-free, the filter provides excellent filtered water quality, whilst permitting operational control and fine setting of the backwash. Main applications: Surface water treatment to