Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Sludge dewatering centrifuges
(39)
Sludge dewatering centrifuges for wastewater and industrial effluent treatment. Continuous mechanical separation to reduce sludge volume. Decanter and scroll designs with variable speed control, abrasion-resistant materials and automation. Skid-mounted units with polymer dosing and CIP. Suitable for municipal plants, digested sludge, food, chemical and mining processes.
Sludge dewatering centrifuges - helping you find the best solution for your project.
DecaPress DP764FD decanter centrifuge
The DecaPress DP764FD decanter centrifuge produces the highest possible separation results with a capacity of 70-130m3/hr. High throughputs are combined with significantly reduced flocculant consumption which results in very high economic efficiency. The DecaPress is simple to adjust and is characterised - due to its rigid design – by stable
DecaPress® DP45-422 decanter centrifuge
The DecaPress® DP45-422 decantercentrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
DecaOil® DO37-362 decanter centrifuge
The DecaOil® DO37-362 is a decanter centrifuge with eccentric gear for two-phase separation. It provides the separation of solid-liquid mixtures consisting of two liquids and a solid phase. The specific density of the solid matter is higher than those of the two liquid phases
DecaThick® DT66-422 decanter centrifuge
The DecaThick®DT66-422 decanter centrifuge with backdrive provides sludge thickening. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
DecaFood® DF54-362 decanter centrifuge
The DecaFood® DF54-362S is for continuous, hygienic solid-liquid separation of two-phase mixtures in the food and beverage industry. It is typically used in food and juice processing plants with materials such as apple, carrot, ginger, elderflower, raspberry and orange. If is a fully enclosed, food-grade machine that is suitable for the cleanest
DP66-422 mobile sludge dewatering units
MSE Hiller DP66-422 mobile sludge dewatering units are built to a high specification and incorporate a high level of process automation and control. They have capacities of up to 90 m3/hr. The mobile units are fitted with their own on-board progressing cavity feed pump, macerator, Endress+Hauser flowmeters, automatic liquid polymer make-up and
DecaPress® DP76-402 decanter centrifuge
The DecaPress® DP76-402 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques. Capacity
DecaPress DP664FD decanter centrifuge
The DecaPress DP664FD decanter centrifuge produces the highest possible separation results and has a capacity of 40-80m3/hr. High throughputs are combined with significantly reduced flocculant consumption which results in very high economic efficiency. The DecaPress is simple to adjust and is characterised - due to its rigid design – by stable
DecaThick® DT37-422 decanter centrifuge
The DecaThick® DT37-422 decanter centrifuge provides sludge thickening. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low to medium scroll differential speeds scroll differential speeds
DecaPress® DP31-422 decanter centrifuge - sludge & water separation systems
The DecaPress®DP31-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques. Designed
Decasmart DP45N - skid-mounted dewatering system
Decasmart DP45N is a skid-mounted decanter centrifuge offering high processing quality and operational reliability. It can process 15-25m3/hr of feed material and can be supplied as a complete package including control panel, pumps, conveyor, pipework, polymer make up, flowmeters etc. Simple plug-and-play integration
DecaPress DP574 centrifuge with SEE Drive
The DecaPress DP574 is a decanter centrifuge used in the dewatering of sludge. Specification bowl length: 2545mm; total length: 4478mm; width: 1510mm; height: 1065mm; capacity: up to 70m3 per hour. It is a decanter centrifuge with scroll comprising a rotating bowl, consisting of a feed pipe, a cylindrical section where the separation of the
DecaPress DP84-362 - decanter centrifuge
The DecaPress DP84-362 decanter centrifuge with scroll comprises a rotating bowl, consisting of a feed pipe, a cylindrical section where the separation of the suspension takes place, and a conical section where the scroll removes the dewatered sludge, the housing enclosing the rotor, the base frame bearing rotor and housing, and the bowl and
DecaPress® DP66-422 decanter centrifuge
The DecaPress® DP66-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
Bespoke centrifuge separators
OSSO provides a centrifuge design-and-build service to meet the requirements of onshore and offshore clients for bespoke separation solutions. The company's in-house project engineering team has over 10 years of experience in creating bespoke centrifugal separation systems. OSSO takes responsibility from the initial outline plan of a project to
DecaTec model D574 for demanding separation duties
DecaTec model D574 is ideally suited to both 2- and 3-phase separation duties and can be used in oil recovery applications in ATEX zone 1 and 2 as well as the maximum possible hygienic food grade production designs. The DecaTec series is based on decades of experience across various industries, combined with the goal of creating a model without
DecaPress® DP15-422 centrifuge with eccentric gear
The DecaPress DP15-422 decanter centrifuge with scroll comprises of the rotating bowl, consisting of a feed pipe, a cylindrical section where the separation of the suspension takes place and a conical section where the scroll removes the dewatered sludge, the housing enclosing the rotor, the base frame bearing rotor and housing, and the bowl and
DecaPress DP664HD decanter centrifuge
The DecaPress DP664HD decanter centrifuge is a high-performance sludge dewatering centrifuge with a 50–100m3/hr capacity. Also available as a mobile test unit (known as Rosie
DecaPress® DP37E-422 decanter centrifuge
The DecaPress®DP37E-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
DecaFood® DF31-362S decanter centrifuge
The DecaFood® DF31-362S is for continuous food-fair separation of two-phase mixtures. The high rotational speeds accelerate the separation of a solid-liquid suspension where the specific density of the liquid is less than the specific density of the solid. Hygienic designs and systems complete with effective Cleaning in Place (CIP) systems make
DecaPress® DP54-422 decanter centrifuge
The DecaPress® DP54-422 decanter centrifuge provides high dewatering of sludge. It is for the continuous separation of a solid-liquid suspension in which the specific gravity of the liquid is less than the specific gravity of the solid. This is accomplished using high bowl speeds and low scroll differential speeds at high scroll torques
Tricanter® horizontal solid bowl centrifuges
Euroby Tricanter® enables continuous, three-phase separation of two immiscible liquids with different densities and a solids phase provided that the liquids have a different density and the solid phase is the heaviest phase. It is available in sizes ranging from pilot scale or small production up to industrial scale with capacities up to 80m3/h
Centrifugal separation systems for drilling
Separo equipment and services for drilling waste management are offered on a contract or rental basis for oil and gas drilling projects. Equipment available includes: fully hydraulic (for uninterrupted processing of variable consistency feedstock); features unique patented dual-scroll (for longer retention time and drier solids). high capacity (70
OSE sludge thickening decanters
OSE sludge thickening decanters have a compact design with a small footprint, low energy demand and high flow rates from 20-250m3/h. Sludge is thickened from around 0.5–1% dry substance to an adjustable 5-8% dry substance, reducing its volume by approximately 90-95%. OSE sludge thickening decanters have limited or no polymer demand, which helps to
