Industrial brass valves

The Type 6213 solenoid valve is a compact valve for neutral media up to 100°C. It provides high flow rates with low noise, and operates free from water hammer. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without

The Horne SWM1 steam and water mixing valve is specifically designed to provide large volumes of hot water instantaneously. It is suitable for applications such as wash-down of plant and facilities, for example in breweries, food production plants, abattoirs and dairies, for vat or tank filling, and for industrial washing machines: steam and water

CLA-VAL models - 50GE-01/NGE50-01 are hydraulically operated, pilot controlled, modulating valves designed to maintain constant upstream pressure withing close limits. This valve can be used for pressure sustaining back pressure or unloading functions in a by-pass system. - Sizes: 1 ½” – 1200mm - Pressure ratings: PN10 to PN40 Typical applications

CLA-VAL model AQUA 80-451 pressure reducing valve can be used in water distribution systems and on domestic distribution systems to protect installations from a high inlet (upstream) pressure. Regardless of variations of inlet pressure, the PRV AQUA 80-451 will reduce and maintain a lower and constant outlet (downstream) pressure

Pilot operated Diaphragm or Y-body floating piston design Steam service up to 10 Bar and 150° C Cryogenic version suitable to -196° C

Type 5406 valves are pilot-controlled solenoid valves with servo pistons. They are suitable for use in oil burner applications. Depending on the version, these valves can be used either as feed line or circulation valves. Their universal coil system reduces logistics and service expenses. Solenoid valves perform important functions both in the

Cla-Val 40-01 and 640-01 Rate of Flow Control Valves prevent excessive flow by limiting flow to a preselected maximum rate, regardless of changing line pressure. They are hydraulically operated, pilot controlled, diaphragm valves. The pilot control responds to the differential pressure produced across an orifice plate installed downstream of the

Wide range of pressure ratings, sizes, and resilient materials provide long service life and low internal leakage. Our most economical, high flow valves for liquid, corrosive, and air/inert gas service. Industrial applications include: car wash, air compressors, pumps, laundry equipment, industrial water control

The Aylesbury KB Type delayed action float valve is suitable for controlling the level of cold water stored in tanks without raised valve chambers. The valve is operated by a transfer of weight in an actuator tube, which causes the valve to open or close. The arrangement of the float and buoy assembly produces a delayed change of balance in the

Series 238 2/2 pilot operated solenoid valves have a brass body (3/8 to 2) and are suitable for use with air, inert gas, water and light oil: compact design saves space, reduces installation time, and simplifies service; short stroke design increases life

The Aylesbury KP Type variable delayed action float valve is suitable for large tanks or tanks with high-flow rates, or with or without raised valve chambers. The KP Type float valve kit comprises an in-line control valve together with an Aylesbury KB Type valve, which functions as a pilot. The pilot valve offers fully variable delayed action

VZWM-L directional control solenoid valves operate with diaphragm technology and differential pressure. They have an armature tube for fitting a solenoid coil of your choice: indirectly controlled poppet valve with diaphragm control; connection, valve G14 ... G2; flow rate 1400 ... 31000 l/min; available in brass or stainless steel casting; varied

VZBA 3-way stainless steel ball valves allow smooth and simple control of aggressive media or gases in piping systems. The valves are ideal wherever processes grow more complex, for example when rinsing two containers at the same time or mixing a combination of essences. Technical features: 3-way ball valve with female thread Ball with L or T

Type 6027 direct acting solenoid valves are available as a compact 2/2-way valve or a safety shut-off valve. They are used for shut-off, dosing, filling, and ventilation. Depending on the version, these valves can be used either as feed line, return line or circulation valves: the push-over solenoid system is of modular design and the coil can be

Posiflow solenoid valves are designed to proportionally control the flow of air and inert gases by varying the electrical input signal to the coil Low hysteresis (< 5%), excellent repeatability (< 3%), and high sensitivity (< 2%) make these valves ideal for high precision flow control

Fike has an extensive line of bursting discs. Flexibility of design, a wide range of materials and extensive bursting disc engineering expertise make Fike uniquely capable of building the precise products for your sealing, venting, small space, pressure relief valve protection or other special requirements. Fike begins by gathering as much

FEATURES Compact design fits in tight spaces Mountable in any position NSF 61 Annex G and 169 versions for potable water and food service Combustion version available for industrial and commercial gas pilot controls Oil version available for industrial and commercial oil burners

Aylesbury KAX Type delayed action float valve is suitable for controlling the level of cold water stored in tanks with raised valve chambers. Operating on the same principles as the K Type valve, the KAX Type valve has an extended drop and is suitable for raised valve chambers. It is primarily designed to fit into chambers or boxes in the covers

Hot Water service up to 10 Bar and 100° C Steam service up to 9 Bar and 180° C -Long life 1 million cycles on hot water and 3.5 Bar steam, 500,000 cycles on 9 Bar steam (tested under laboratory conditions) Threaded bonnet for quick inspection and serviceability; reducing downtime and maintenance costs Pilot operated diaphragm and piston valves -Stainless steel seats Floating PTFE discs

Bürkerts externally piloted Type 2000 angle-seat valve is used within heat exchange systems in the food and beverage, pharmaceutical and biotechnology industries. It is versatile, and is suited to media including water, alcohol, oils, fuel, hydraulic fluids, salt solution, alkali solutions, organic solvents, steam: excellent sealing integrity

VZPR pneumatically actuated ball valves integrate VAPB ball valves and DAPS quarter-turn actuators. The valves feature adapted torque for reliable opening and closing: a range of drive sizes is available where different diameters are required, thus avoiding problems with oversizing. Plug and process functionality eliminates the need for

?Reliable, proven compact design. Large choice of poppet valves with tight shutoff. AC/DC interchangeable. Wide range of elastomers for specialty service. Limited range of enclosures to suit various environments. Valves available in multiple manifold constructions. Mountable in any position. Valves do not require a minimum operating pressure