Aqualarm water leak detection systems for data centre

 

Click for full image

 

• 

Turkcell Gebze data centre 

1/12

Related entries

• 

  Aqualarm ZLM-500 zoned cable monitoring for water leaks

  J.A.M. Ltd

  The Aqualarm ZLM-500 zoned locating module is used to monitor combined leader / jumper and detecting cables for water leaks and cable damage. ZLM-500 is typically used for larger areas allowing monitoring per zone. It can monitor...
• 

  iZ-T25 touchscreen control for multiple leak detectors

  J.A.M. Ltd

  The i-Zone Touch control panel - model iZ-T25 - can simultaneously monitor all 25 Aqualarm detectors, including water, oils, chemicals, and refrigerant gas leak detectors, and temperature and humidity detectors. Two pulsed...
• 

  i-Zone Mini control panel multi-zone water leak detector

  J.A.M. Ltd

  The i-Zone Mini control panel can monitor up to four zones for water leak detection using cable, point, float, or overflow detectors. The status of each detector is displayed on an LED monitor. Up to 100m of network cable per zone
• 

  STDi-24 point of use conductive water detector

  J.A.M. Ltd

  The STDi-24 point of use water detector is comprised of two components: the detector module and the point detector, connected together via a 1m jumper cable. Both the detector module and point detector are manufactured from...
• 

  IRDi-24 point of use infrared oil detector

  J.A.M. Ltd

  The IRDi-24 point of use oil detector is made up of two components: the detector module and the point of use detector, connected together via a 1m jumper cable. Both the detector module and point of use detector are manufactured...
• 

  OFDi-24 overflow detector – water in overflow pipes

  J.A.M. Ltd

  The Aqualarm OFDi-24 overflow detector is made up of two components: the detector module and the overflow detector, connected via a 2m jumper cable. Both the detector module and overflow detector are manufactured from STAREX...
• 

  UDC-24 ‘Universal’ Zone Detector Module for water leaks

  J.A.M. Ltd

  The UDC-24 ‘Universal’ Zone Detector Module requires a 24-volt power source and, in the event of an alarm, a volt-free contact is triggered, giving an alarm signal back to a BMS. Does not require an i-Zone control panel; zone...
• 

  UDOF-24 ‘Universal’ water in overflow pipe detector

  J.A.M. Ltd

  UDOF-24 ‘Universal’ Overflow Detector is used to detect water in an overflow pipe. It requires a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS
• 

  UDF-24 ‘Universal’ Float Detector for water levels

  J.A.M. Ltd

  The UDF-24 ‘Universal’ Float Detector requires a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: does not require an i-Zone control panel; for use...