Applications Landfill sites
Wastewater treatment works
System components Blowers
Installation Mobile
 
 
 

Surface foam cover is an effective and quick means of achieving short-term dust or odour control.

Corgin's foam products are designed to be applied to troublesome odour and dust sources such as waste stockpiles and freshly-remediated ground, to create both a physical and a highly-visible barrier that instantly ‘caps’ unwelcome emissions.

Corgin offer three different methods of applying foam cover, summarised as follows:

FoamChief - 2000-litre tank mounted on a twin-axle trailer chassis

  • A purpose-built, large-scale foam applicator - engine, pump, foam inductor, 23m of fire hose and two separate foam branch-pipes
  • Option of low or medium expansion foam output
  • Ideal for circumstances where there is a requirement to cover large areas quickly
  • Entirely self-contained

FoamLayer - four-wheeled, small-scale foam applicator, moved by hand.

  • A 95-litre capacity tank with drain feature and 8-inch cap for ease of filling, 9-metre foam applicator hose
  • Wet/dry adjustment valve for varying the consistency of the foam
  • Requires a compressed air supply of around 4-5cfm at 40-80psi

FoamLance attachment - for optional small scale foam application

Foam cover is most commonly used for odour suppression applications and in such cases, OdourCap is recommended. This consists of Corgin odour neutralisers blended with foam-generating concentrate and should typically be dosed into water at a 1:50 (2%) dilution rate. OdourCap contains natural essential oils and has its own pleasant, natural scent. For more information on our odour neutralisers, visit our consumables page.

FoamCap can also be used for situations where foam is being applied to control dust emissions only.


Surface foam cover is an effective and quick means of achieving short-term dust or odour control.

Corgin's foam products are designed to be applied to troublesome odour and dust sources such as waste stockpiles and freshly-remediated ground, to create both a physical and a highly-visible barrier that instantly ‘caps’ unwelcome emissions.

Corgin offer three different methods of applying foam cover, summarised as follows:

FoamChief - 2000-litre tank mounted on a twin-axle trailer chassis

  • A purpose-built, large-scale foam applicator - engine, pump, foam inductor, 23m of fire hose and two separate foam branch-pipes
  • Option of low or medium expansion foam output
  • Ideal for circumstances where there is a requirement to cover large areas quickly
  • Entirely self-contained

FoamLayer - four-wheeled, small-scale foam applicator, moved by hand.

  • A 95-litre capacity tank with drain feature and 8-inch cap for ease of filling, 9-metre foam applicator hose
  • Wet/dry adjustment valve for varying the consistency of the foam
  • Requires a compressed air supply of around 4-5cfm at 40-80psi

FoamLance attachment - for optional small scale foam application

Foam cover is most commonly used for odour suppression applications and in such cases, OdourCap is recommended. This consists of Corgin odour neutralisers blended with foam-generating concentrate and should typically be dosed into water at a 1:50 (2%) dilution rate. OdourCap contains natural essential oils and has its own pleasant, natural scent. For more information on our odour neutralisers, visit our consumables page.

FoamCap can also be used for situations where foam is being applied to control dust emissions only.


Interested in this product?
Call 01785 229300
OR
 
 
 
Enquire
 


Related entries

  • Corgin: Odour control and dust suppression products
    Odour control and dust suppression products
    Corgin
    Corgin offers a range of odour and dust abatement products that work in various different ways using surface-active agents. Surface active agents impart a reduced surface tention to finely atomised micro-droplets, which...
  • Corgin:  AtomisterAiro for odour, dust and fly control
    AtomisterAiro for odour, dust and fly control
    Corgin
    AtomisterAiro ultra-fine mist spray technology is used to control odour, dust and flies, without wetting, in the food processing, quarry, waste handling and wastewater industries. Click on 'Visit Website' to see how this...
  • Corgin: DustLayer mobile dust and odour suppression unit
    DustLayer mobile dust and odour suppression unit
    Corgin
    DustLayer is a mobile, self-contained unit for the suppression of odour and dust by high-pressure spraying. It incorporates a 5m-high T-shaped mast with three high-pressure, fan spray nozzles. It can be rapidly deployed and...
  • Corgin: AtomisterAiro odour suppression system for landfill site
    AtomisterAiro odour suppression system for landfill site
    Corgin
    Corgin was commissioned to install an effective form of odour suppression at a landfill site near a residential development that was getting complaints
Not found what you're looking for? View other options

Ask Corgin about

Surface foam cover for dust or odour control