Liquid transfer & flow control

Althon inline penstock 100mm is used in surface, sewage and process water applications for isolation inline with a pipeline system. Suitable for on/off-seating pressures of 10MwC (tested up to 20MwC). Used above and below ground. High chemical resistance. Manual or actuated operation. HDPE and stainless steel construction. Pipe or flange mounted. W220mm x H442mm x D400mm

Althon 250mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 250mm diameter. Althon provide their ductile iron flap valves with stainless steel

The Althon 1300mm HDPE Penstock, designed for use with 1300mm pipework, is suitable for surface, sewer, and water process applications. Made from HDPE and grade 316L stainless steel, it has a 50-year design life and is built to handle sealing pressures of 5MwC. The penstock requires minimal maintenance and is easy to install. Typically available

Hydro-Brake® Agile is a float-activated flow control that extends the Hydro-Brake® Flow Control Series. It can be engineered to achieve the lowest possible flood storage volumes in one simple, cost-effective and easy-to-install unit without any power requirements. It is ideally suited to Sustainable Drainage Systems (SuDS) compliance on new

Designed for pipework up to 200mmm, the ASA Manhole & Flow Control Penstock is suitable for installation in manhole and flow control chambers: size: 200mm; fixing type: wall-mounted; materials: HDPE, stainless steel 316, EPDM, POM; working pressure: 5.0MwC on/off. Althon flow control penstocks are T-key operated with a non-rising spindle. Spindle

Althon Inline Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. The Alton Inline Penstock is for Isolation Inline with a Pipe system. The Althon Inline Penstock is guaranteed to a Maximum Pressure of 10MwC as the Penstock has been tested up to

Althon 400mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 400mm; suitable for factory or retrofit to precast concrete

The GEMÜ R480 Victoria soft seated metal butterfly valve is equipped with a bare shaft with top flange in accordance with EN ISO 5211. The butterfly valve is available in nominal sizes DN 50 to 300 and in standardised installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions

Pneumatically-operated 2/2-way globe valve with proven GEMÜ globe valve sealing principle and innovative modular linear actuator. Available in angle seat and straight seat versions. Visual indicator and sight glass as standard available. Simple assembly of automation and drive modules thanks to standardised interface. The anti-rotation lock in the

Althon 100mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 110mm; suitable for factory or retrofit to precast concrete

Althon Inline Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. The Alton Inline Penstock is for Isolation Inline with a Pipe system. The Althon Inline Penstock is guaranteed to a Maximum Pressure of 10MwC as the Penstock has been tested up to

Althon 300mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 300mm; suitable for factory or retrofit to precast concrete

Althon Medium Duty Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. Althon Medium Duty Penstocks have been developed for the majority of situations where a Penstock is required. Medium Duty Penstocks are suitable for sealing pressures of 5MwC

The M-Block plastic multi-port valve block combines several valves and pipe sections in one compact unit. It can perform various functions for complex tasks in plant engineering while offering a host of benefits. Compared to conventional designs, the block solution has a smaller footprint as it requires a smaller number of pipework/fittings and connection points

Althon designs and manufactures high-quality HDPE fish- and eel-friendly flap valves and fish-friendly flap gates. Fish-friendly flap valves are designed to prevent harm to fish as they migrate through flood and flow control equipment. Manufactured in HDPE and 316L stainless steel; 50-year design life; typically designed to max 5Mwc (72hrs) and

For valve designs in biogas plants and for upgrading biomethane and CO2, GEMÜ offers technically-advanced solutions tailored to each process step. Advanced valve solutions for biomethane upgrading, including globe, butterfly, diaphragm and ball valves. Comprehensive systems for seamless integration in the gasification process

Althon Medium Duty Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. Althon Medium Duty Penstocks have been developed for the majority of situations where a Penstock is required. Medium Duty Penstocks are suitable for sealing pressures of 5MwC

Althon PHA-G HDPE hand stop gates are a simple manually-operated valve for small dimension openings and low pressures: manufactured in HDPE with an EPDM seal; available to suit 150, 200, 250, 300, 400 and 500mm diameter openings. Above this size Penstocks are a better option because of the weight; maximum on and off seating pressure is equal to

Althon 800mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 800mm; suitable for factory or retrofit to precast concrete

Ball Valve 546 Pro is designed to meet technical and digital requirements for industrial applications. Building on the success of its predecessor, improvements include a reinforced security break point in the stem interface to prevent leaks due to wear or excessive force, and 2 integrated sealing rings in the stem interface to provide double safety

Designed for pipework up to 150mm, the ASA Manhole & Flow Control Penstock is suitable for installation in manhole and flow control chambers: size: 150mm; fixing type: wall-mounted; materials: HDPE, stainless steel 316, EPDM, POM; working pressure: 5.0MwC on/off. Althon flow control penstocks are T-key operated with a non-rising spindle. Spindle

Althon Medium Duty Penstocks can be used in Surface, Sewer and Process Water applications. They are a Simple and Highly Effective way to Prevent Water Backflow into a system. Althon Medium Duty Penstocks have been developed for the majority of situations where a Penstock is required. Medium Duty Penstocks are suitable for sealing pressures of 5MwC

Althon 150mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 160mm; suitable for factory or retrofit to precast concrete

V186/V86 valves keep the working or system-related pressures constant, balance out pressure pulsation and reduce pressure peaks in process systems. They are used in microelectronics, measurement and control, the chemical process industry and in water treatment. If the inlet pressure rises above the set value, the pressurised valve piston is lifted