Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Industrial valves
(368)
Industrial valves are used to control, direct or regulate the flow of certain types of media: liquids, gases, steam, air, slurries and granular solids. They work by opening, closing or partially obstructing the passages through which these media flow.
Read LessIndustrial valves - helping you find the best solution for your project.
Althon 250mm ductile iron flap valve
Althon 250mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 250mm diameter. Althon provide their ductile iron flap valves with stainless steel
Althon HDPE 400mm flap valve
Althon 400mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 400mm; suitable for factory or retrofit to precast concrete
GEMÜ R480 Victoria - bare shaft butterfly valve
The GEMÜ R480 Victoria soft seated metal butterfly valve is equipped with a bare shaft with top flange in accordance with EN ISO 5211. The butterfly valve is available in nominal sizes DN 50 to 300 and in standardised installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions
GEMÜ S40 - pneumatically-operated 2/2-way globe valve
Pneumatically-operated 2/2-way globe valve with proven GEMÜ globe valve sealing principle and innovative modular linear actuator. Available in angle seat and straight seat versions. Visual indicator and sight glass as standard available. Simple assembly of automation and drive modules thanks to standardised interface. The anti-rotation lock in the
Althon HDPE 100mm flap valve
Althon 100mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 110mm; suitable for factory or retrofit to precast concrete
Althon HDPE 300mm flap valve
Althon 300mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 300mm; suitable for factory or retrofit to precast concrete
GEMÜ P600 M-Block plastic multi-port valve block
The M-Block plastic multi-port valve block combines several valves and pipe sections in one compact unit. It can perform various functions for complex tasks in plant engineering while offering a host of benefits. Compared to conventional designs, the block solution has a smaller footprint as it requires a smaller number of pipework/fittings and connection points
Fish- and eel-friendly flap valves
Althon designs and manufactures high-quality HDPE fish- and eel-friendly flap valves and fish-friendly flap gates. Fish-friendly flap valves are designed to prevent harm to fish as they migrate through flood and flow control equipment. Manufactured in HDPE and 316L stainless steel; 50-year design life; typically designed to max 5Mwc (72hrs) and
Valves for the biogas and biomethane industry
For valve designs in biogas plants and for upgrading biomethane and CO2, GEMÜ offers technically-advanced solutions tailored to each process step. Advanced valve solutions for biomethane upgrading, including globe, butterfly, diaphragm and ball valves. Comprehensive systems for seamless integration in the gasification process
Althon HDPE 800mm flap valve
Althon 800mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 800mm; suitable for factory or retrofit to precast concrete
Ball Valve 546 Pro - thermostatic industrial valves
Ball Valve 546 Pro is designed to meet technical and digital requirements for industrial applications. Building on the success of its predecessor, improvements include a reinforced security break point in the stem interface to prevent leaks due to wear or excessive force, and 2 integrated sealing rings in the stem interface to provide double safety
Althon HDPE 150mm flap valve
Althon 150mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 160mm; suitable for factory or retrofit to precast concrete
V186/V86 pressure retaining valve
V186/V86 valves keep the working or system-related pressures constant, balance out pressure pulsation and reduce pressure peaks in process systems. They are used in microelectronics, measurement and control, the chemical process industry and in water treatment. If the inlet pressure rises above the set value, the pressurised valve piston is lifted
GEMÜ D40 | D41 pneumatically-actuated diaphragm valves
The pneumatically actuated GEMÜ D40 and D41 diaphragm valves are designed for use in aseptic manufacturing processes. The sealing concept of the valves is based on the newly developed GEMÜ diaphragm, which also hermetically separates the actuator from the medium. GEMÜ D40 is mounted using four collar nuts, while the GEMÜ D41 valve type equipped
GEMÜ 567 BioStar aseptic and precision control valve
The GEMÜ 567 BioStar is a diaphragm globe control value designed for precision flow and dosing in aseptic applications, including biotechnology, food, beverage and pharmaceuticals industries. Typical uses include the control of sterile steam and air, feed and discharge control in bioreactors, and dosing of liquids and gases
GEMÜ 650 BioStar pneumatically-operated diaphragm valve
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally
Althon HDPE 700mm flap valve
Althon 700mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 700mm; suitable for factory or retrofit to precast concrete
Althon HDPE 1500mm flap valve
Althon 1500mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 1500mm; suitable for factory or retrofit to precast concrete
GEMÜ SU40 SUMONDO pneumatic actuator single-use valves
The GEMÜ SU40 SUMONDO is a single-use diaphragm valve designed for use in pharmaceutical, biological and medical applications. It features a mechanically stable, gamma-sterilizable plastic body and hermetic sealing through an internally welded diaphragm. For installation, the single-use diaphragm valve body is secured on the pneumatic stainless
GEMÜ R481 - metal pneumatic butterfly valve for liquid flow control
GEMÜ R481 Victoria is a soft-seated metal butterfly valve with a metal actuator, designed for pneumatic operation in flow control applications. Made from SG iron with epoxy coating, it supports wafer, lug and U-section body types, and suits a wide range of pipe standards and sizes from DN 25 to 600. Suitable for use with various liner and disc
Althon 200mm ductile iron flap valve
Althon 200mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 150mm diameter. Althon provide their ductile iron flap valves with stainless steel
Manual butterfly valves Type 567 / 568
Compact, flexible and reliable, Type 567/568 butterfly shut-off valves are suitable for water and lug-style applications. The modular design allows you to exchange individual system components - fast, easily and at very little expense and effort: cooling equipment; chemical process industry; marine; electroplating; automotive industry; power- PRODUCT
George Fischer Sales
Rubber-lined butterfly valves for Industry 4.0
New generation GEMÜ rubber lined butterfly valves are manufactured in-house, giving GEMÜ full control over production processes that are critical to quality. Manufacturing in-house, also allows greater flexibility in delivery times to meet project timescales. GEMÜ R480 Victoria series rubber lined butterfly valves are compatible with GEMÜ CONEXO
Althon HDPE push fit flap valves
Althon push fit flap valves are easy to install, no grouting is required. Made of strong but light weight HDPE, they are virtually maintenance free, as well as being impact and ultra violet resistant. Althon push fit flap valves are supplied complete with all seals and stainless steel fixings
