Industrial water valves

Althon 300mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 300mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon PTK-F flange mounted flap valves are made from HDPE and designed for flow control and flood prevention, suitable for installation both below and above the waterline. Hung at a 10 degree angle for a watertight seal, these valves handle water pressures up to 5 MWC for 72 hours and 1 MWC for 50 years. Flange connections can be specified to

Althon 250mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 250mm; suitable for factory or retrofit to precast concrete

Ball Valve 543 Pro is the ideal valve for all mixing and distribution processes, including redirecting, mixing, distributing, or even shutting off a medium in areas of application within the chemical process industry or water applications such as desalination. A reinforced security break point in the stem interface prevents leaks due to wear or

Althon 1500mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 1500mm; suitable for factory or retrofit to precast concrete

The M-Block plastic multi-port valve block combines several valves and pipe sections in one compact unit. It can perform various functions for complex tasks in plant engineering while offering a host of benefits. Compared to conventional designs, the block solution has a smaller footprint as it requires a smaller number of pipework/fittings and connection points

Althon 150mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 150mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon 900mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 900mm; suitable for factory or retrofit to precast concrete

Althon 600mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 600mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon 450mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 450mm diameter. Althon provide their ductile iron flap valves with stainless steel

The range of EBCO high flow rate float valves are simple and robust and can reliably self-compensate for changes in water supply pressures. One size of seat and one size of ball float will suit any working pressure up to the maximum recommendation of 5bar (72psi) for the full bore float valve. Even at these pressures the full bore seat combined

Althon designs and manufactures high-quality HDPE fish- and eel-friendly flap valves and fish-friendly flap gates. Fish-friendly flap valves are designed to prevent harm to fish as they migrate through flood and flow control equipment. Manufactured in HDPE and 316L stainless steel; 50-year design life; typically designed to max 5Mwc (72hrs) and

The Series 2100 Suction Demand Valve (SDV) is designed for the dosing industry to hydraulically isolate a metering pump from its bulk supply tank. This isolation prevents variations in suction pressure caused by changes in tank liquid levels, supporting consistent pump accuracy. By maintaining dosing accuracy, the valve reduces wastage of primary

Althon 225mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 225mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon 300mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 300mm; suitable for factory or retrofit to precast concrete

WaStop Inline Check Valve is a non-return valve designed to prevent backflow and flooding in pipelines. Works autonomously using differential pressure, with no need for electricity or manual operation. Made with a flexible membrane that allows debris to pass through and prevents blockages. Installs at any angle and does not require a head wall

Compact, flexible and reliable, Type 567/568 butterfly shut-off valves are suitable for water and lug-style applications. The modular design allows you to exchange individual system components - fast, easily and at very little expense and effort: cooling equipment; chemical process industry; marine; electroplating; automotive industry; power

V182 and V82 valves reduce the pressure within a system to a pre-set value. By using differential pressure, the valve adjusts itself to the set working pressure. They are used in microelectronics, measurement and control, the chemical process industry and in water treatment. The outlet pressure (working pressure) is not directly related to the

Althon 250mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 250mm diameter. Althon provide their ductile iron flap valves with stainless steel

Althon 1000mm HDPE flap valves can be used in surface, sewer and water process applications. HDPE flap valves are a simple and highly effective way to prevent water backflow into a system: manufactured in HDPE and Stainless Steel 316L; square backplate; for use with pipework up to 1000mm; suitable for factory or retrofit to precast concrete

Althon manufactures precast concrete headwalls with factory-fitted flap valves ensuring they fit properly and reducing installation time on site. Factory-fitting flap valves to headwalls means the headwalls do not have to be drilled once on site. Althon can fit multiple flap valves to a single headwall and offers flap valves fitted to concrete

Althon 500mm Ductile Iron Flap valves are designed and manufactured for use in industrial and domestic effluent and water treatment situations as well as protected river and sea outfalls with gravity flows and are suitable for use with pipework up to and including 500mm diameter. Althon provide their ductile iron flap valves with stainless steel

Butterfly valve with moulded PFA or PTFE body liner. Suited to chemical or corrosive applications. Specially designed shaft seal to prevent atmospheric leaks. DN40 to DN900. PN3/10/16 bar. Temperatures up to 200°C

Butterfly Valve 565 controls fluid in water and water treatment systems. Made from corrosion-resistant plastics, it is lightweight, suitable for both wafer and lug-style installations, and matches the installation length of metal valves. Designed for easy handling, low maintenance and high durability, it supports a range of water applications