Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Industrial steam valves
(100)
Industrial steam valves for process plant, energy, HVAC and utilities. Isolation, control and relief of saturated and superheated steam. Globe, gate, ball and butterfly valves, PRVs, safety relief, check and blowdown. Steam distribution and condensate management. Manual, actuated and modulating options. High-pressure, high-temperature duties. Compliance with PED and ASME standards.
Industrial steam valves - helping you find the best solution for your project.
GEMÜ 490 - PFA-lined butterfly valve with bare shaft
Butterfly valve with moulded PFA or PTFE body liner. Suited to chemical or corrosive applications. Specially designed shaft seal to prevent atmospheric leaks. DN40 to DN900. PN3/10/16 bar. Temperatures up to 200°C
GEMÜ 650 BioStar pneumatically-operated diaphragm valve
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally
GEMÜ B44 pneumatically-operated ball valve
The GEMÜ B44 3-piece 2/2-way metal ball valve is pneumatically operated. The 1.4435 stainless steel alloy material composition used for the ball valve body (compliant with 316L) with a low delta ferrite proportion of <3% is particularly suited to applications in the supply sector for the pharmaceutical, foodstuffs processing and biotechnology
Check-Flex® Inline Check Valves
The Check-Flex valves are an inline check valve that seals directly to the pipe, meaning no work is needed to the existing wall opening or benching. The valves one piece design allows the valve to flex without the point stress of older three piece assembled design. The valve combines a Sealing Gasket, Moving Flap and Container into a single
GEMÜ R480 Victoria - bare shaft butterfly valve
The GEMÜ R480 Victoria soft seated metal butterfly valve is equipped with a bare shaft with top flange in accordance with EN ISO 5211. The butterfly valve is available in nominal sizes DN 50 to 300 and in standardised installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions
GEMÜ 567 BioStar aseptic and precision control valve
The GEMÜ 567 BioStar is a diaphragm globe control value designed for precision flow and dosing in aseptic applications, including biotechnology, food, beverage and pharmaceuticals industries. Typical uses include the control of sterile steam and air, feed and discharge control in bioreactors, and dosing of liquids and gases
Somas VSS triple eccentric butterfly valve
SOMAS type VSS butterfly valves are used for control, on/off and shut-off applications. They are designed to handle liquids, gases or steam across a wide range of temperatures. The valves have an advanced triple-eccentric design. This includes a uniquely shaped disc that allows a solid stainless steel seat to be used. The solid seat is unaffected
Engineered bursting discs
Fike has an extensive line of bursting discs. Flexibility of design, a wide range of materials and extensive bursting disc engineering expertise make Fike uniquely capable of building the precise products for your sealing, venting, small space, pressure relief valve protection or other special requirements. Fike begins by gathering as much
Aluminium bronze globe valves Series 4500
Blackhall aluminum bronze globe valves Series 4500 are designed and engineered specifically for marine applications. They have a blow-out-proof spindle made to a one-piece, high-strength design. They have a long-life, low-torque spindle thread, and a lightweight ergonomic aluminium handwheel. A colour-coded handwheel option is available- the
Aluminium bronze gate valves Series 4400
Blackhall aluminum bronze gate valves Series 4400 are designed and engineered specifically for marine applications. They have a blow-out-proof spindle made to a one-piece, high-strength design. They have a long-life, low-torque spindle thread, and a lightweight ergonomic aluminium handwheel. A colour-coded handwheel option is available- the
MTV high-performance butterfly valve
The MTV is a control, on/off and shut-off butterfly valve. It is designed to handle a wide range of liquids, gases and steam within a broad temperature range. The MTV valve can be mounted between flanges and is also supplied in lugged design. It has an advanced triple eccentric design, including a unique disc shape that allows the use of a solid
The 3233 manually-operated diaphragm valve in compact form consists of a flow-optimised cast stainless steel body with various surface finishes, a diaphragm and a manual actuator. It is suitable for neutral gases and liquids, high purity, sterile, viscous, aggressive or abrasive fluids: material combinations are selectable; diaphragm is both a- PRODUCT
- Bürkert Fluid Control Systems
The Type 2301 globe valve is constructed to fulfil tough criteria in process environments and is part of Bürkert's modular range of ELEMENT valves and sensors. The valve's reliability is built on its proven self-adjusting packing gland. Each globe valve body can be fitted with three to five sizes of trim sets. These parabolic trims provide a- PRODUCT
- Bürkert Fluid Control Systems
Hot Water service up to 10 Bar and 100° C Steam service up to 9 Bar and 180° C -Long life 1 million cycles on hot water and 3.5 Bar steam, 500,000 cycles on 9 Bar steam (tested under laboratory conditions) Threaded bonnet for quick inspection and serviceability; reducing downtime and maintenance costs Pilot operated diaphragm and piston valves -Stainless steel seats Floating PTFE discs- PRODUCT
- Emerson Automation Fluid Control & Pneumatics UK
The Type 2103 is a pneumatically operated, externally piloted diaphragm valve designed for usage in hygienic or aggressive environments. It is part of Bürkert's modular range of ELEMENT valves and sensors. The valve consists of a pneumatically operated piston actuator, a diaphragm and a 2-way valve housing made of cast stainless steel. The design- PRODUCT
- Bürkert Fluid Control Systems
Type 3234 / 2104 are zero dead leg T valves designed for use with neutral gases and liquids, and high purity, sterile, aggressive or abrasive media. The valve enables optimal sampling, draining or diverting of critical process fluids. The valve body is machined from a single piece of block material with no weld seam. The high quality diaphragms- PRODUCT
- Bürkert Fluid Control Systems
Pilot operated Diaphragm or Y-body floating piston design Steam service up to 10 Bar and 150° C Cryogenic version suitable to -196° C- PRODUCT
- Emerson Automation Fluid Control & Pneumatics UK
The innovative Type 3360 process controller valve is used to control tasks under demanding operating conditions. The valve position is controlled by an electromotive actuator with ball screw which is fast and precise: fast, precision control; suitable for harsh environments; protection class IP65 / IP67; high impact and vibration resistance; long- PRODUCT
- Bürkert Fluid Control Systems
The 2100 is a modular angle-seat valve that can meet tough criteria for process environments. It is part of Bürkert's modular range of ELEMENT valves and sensors. It is based around a proven self-adjusting spindle packing with V-seals. The design enables the easy integration of automation modules (whether they are electrical / optical position- PRODUCT
- Bürkert Fluid Control Systems
Type 2712 2/2-way globe control valves are pneumatically operated. They have a stainless steel body and are available with the choice of flange-, threaded- and weld-end port connections. The 2712 system has been specifically engineered for reliable control in applications where accuracy is paramount: fine chemical pressure and flow control; high- PRODUCT
- Bürkert Fluid Control Systems
VZPR pneumatically actuated ball valves integrate VAPB ball valves and DAPS quarter-turn actuators. The valves feature adapted torque for reliable opening and closing: a range of drive sizes is available where different diameters are required, thus avoiding problems with oversizing. Plug and process functionality eliminates the need for
The Type 3361 is a stainless steel process control globe valve designed for control tasks indemanding conditions. It features an electromotive actuator with a ball screw that positions the control cone with high levels of precision. Precise and fast flow control; easy cleaning by its design according hygienic demands- PRODUCT
- Bürkert Fluid Control Systems
The Type 2031 is a 2/2 way pneumatically operated, pilot controlled diaphragm valve. The diaphragm creates hermetical separation of fluids from the operating mechanism. It provides higher flow than conventional diaphragm valves with bi-directional flow and also ensures zero dead volume in the flow: available in DN 4-100 ratings; actuator from PA- PRODUCT
- Bürkert Fluid Control Systems
The 2300 angle-seat control valve is optimised for tough process environments. It meets EHEDG hygienic engineering guidelines for materials compatibility, have smooth surfaces and external seals, and are resistant to cleaning solutions. It is part of Burkert's range of ELEMENT valves, radar level sensors and analytical field transmitters, which- PRODUCT
- Bürkert Fluid Control Systems
