Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Tank covers
Tank covers - helping you find the best solution for your project.
GRP tank covers
Drayton Tank & Accessories offers standard and made-to-measure tank covers and lids in GRP. Square, rectangular and circular lids can be made to specific specifications to suit the application. They can be made from several pieces and bolted together for large tanks. All lids and covers can be supplied plain or with insulation. The lids
Bespoke Inlet Works Covers - grp covers for wastewater sites
Inlet Works Covers by Corporate Engineering are made from glass reinforced plastic and designed for odour containment in wastewater inlet works. Each cover is custom-made to fit new or existing structures. Panels can support imposed loads up to 5kN/m2 and include slip deterrent surfaces and handrailing where needed: custom-made covers for odour
Grit channel odour control covers
Grit channel covers are used for odour control purposes in holding tanks where flexibility is needed to allow unrestricted movement of process equipment. A bespoke aluminium or stainless steel frame supports two air-regulated inflated fabric tubes which press together to create an excellent odour barrier whilst still allowing mechanical parts to
Conical GRP Covers - fibreglass tank lids for odour control and safety
Conical GRP Tank Covers are made from glass reinforced plastic and designed for odour containment on tanks. Diameters up to 16.22m are standard. Designed to WIMES 8.05 and BS EN-1991-1-1:2002 standards. Segmented construction allows easy handling and assembly. Colour options include any RAL or BS4800 shade: GRP tank cover system for odour control
Beam And Infill Covers - grp tank lids for large span water chambers
Beam and Infill GRP Tank Covers are made from glass reinforced plastic and designed to cover tanks or chambers of any shape. Spans up to 25m and is self-supporting. Low profile minimises air space and visual impact. Supplied as a kit of smaller parts for easy transport and installation. Can be manufactured to any British Standard 4800 or RAL
Sliding Covers - grp tank lids for safe, corrosion resistant access
Sliding GRP Tank Covers for use where standard inspection hatches do not allow enough access to chambers or equipment below. All steelwork uses stainless steel Grade 316 and running gear is corrosion resistant. Designed for demanding conditions in sewage treatment works: sliding cover system for improved access to tanks and chambers; made from
Keder odour control covers
Keder covers are odour control covers for large process tanks, which can be easily removed for inspection and maintenance of the tank process. The tank is covered using a number of fabric covers, typically 3m wide, with a beaded edging which feeds into extruded aluminium guide rails mounted on a series of metal trusses. Taking as few of two people
Hybrid Covers - grp and fabric tank covers for inspection access
Hybrid GRP Tank Covers are modified glass reinforced plastic covers with integrated fabric sections designed for inspection access. Made for operations where large areas need to be opened for visual checks. Fabric section operates with three moving parts for easy, single-person use. Tensioned fabric prevents ponding and ice build-up when closed
Aqua Turbo® floating covers
Polyester floating covers are available for use with most sizes of Aqua Turbo® floating aerators, and are designed to float on the aerated liquid. They are suitable for oxidation ditch applications, SBR tanks or ASP treatment basins. They completely remove aerosols, and reduce odour, noise and splash, without reducing aerator performance. The
Rotating GRP Tank Covers - fibreglass lids for tanks with scraper systems
Rotating GRP Tank Covers are specialised fibreglass covers designed for tanks with rotating scraper systems. Coated in chemical-resistant, water-resistant, and temperature-resistant resins. Can be fitted with custom access hatches, vented cowls, and connection flanges. Personnel access areas include non-slip treatment for safety: specialised cover
Lightweight, self-supporting GRP tank covers can be fitted to all our tanks and are excellent for use in conjunction with odour control systems. They are typically 20° conical, although as an alternative low profile beam & infill type covers can be supplied to give more amenable pedestrian access over the roof area. We are able to retrofit GRP- PRODUCT
- Goodwin Tanks
Stainless steel tank covers are low profile (typically only 1°) airtight covers which use internal stainless steel column supports. They are particularly suited for potable water storage. They can be designed to withstand higher wind and pedestrian loads than any of our other covers. They can be fitted to all our range of tanks and are available- PRODUCT
- Goodwin Tanks
Tank covers - helping you find the best companies for your project.
Drayton Tank & Accessories
Unit 21, Oakwell Business Centre, Oakwell view, Barnsley, S71 1HXCorporate Engineering
Undertakes the design, manufacture and installation of GRP covers for the water industry. Covers are custom-built for specific sites to provide corrosion-resistant, lightweight solutions to odour control problems or for health and safety requirements. They are not only produced for tanks, but also aeration lanes, channels, pumps and other plant
Culham Mill, Little London Road, Silchester, Reading, RG7 2PPPower Plastics
Develops and manufactures covers, liners and sheeting for industrial applications. Products include removable PVC covers for water treatment works, which provide odour control by containing the unpleasant smells emitted from treatment or landfill drainage tanks. Fumigation systems suitable for gas containment applications in foodstuff production
Station Road, Thirsk, YO7 1PZSFA enviro
Unit 1, Watford Interchange,, Colonial Way, Watford, WD24 4WPAir-Water Treatments
Products include: dry oxidising air scrubbers and biofilters for odour control, suitable for wet wells, desludge chambers and tankering points; odour control manhole and vent stack filters plus a range of GRP covers and spray equipment
33A Castle Close, Hawarden Industrial Park, Manor Lane, Hawarden, CH5 3PPAxium Process
Fabricates sightglasses designed for product visualisation. Clamp blank models feature mechanically pre-stressed glass fused to a metal construction and are suitable for food processing and sterile applications. Produced in Duplex or Hastelloy alloys with borosilicate glass. Sizes from 1 to 12. Also offers standard in-line tubular for operating
Hendy Industrial Estate, Hendy, Swansea, SA4 0XPCST Industries
Manufactures and installs aluminum geodesic domes for covering and protecting potable water, wastewater and treatment, process water, landfill leachate and treatment, and fire suppression water facilities. The domes are based on integrated structural frames which are rigid and lightweight, with the compact struts fabricated from high quality
Cotes Park Lane, Cotes Park Industrial Estate, Alfreton, DE55 4NJCamfil UK
Camfil offers abatement systems based on adsorption, dry chemical, biological and particulate filtration technology, to clean emission streams from industrial applications to ensure compliance with environmental legislation. A biological system for treating VOCs is capable of treating gases containing pure and mixed solvents or odours. The system
Knowsley Road, Haslingden, Rossendale, BB4 4EGGRP Aberdeen
Manufacture GRP tank covers. GRP Aberdeen offer a full turnkey service including; survey; design; full engineering analysis; standard & client specific design
Units 2 Logman Centre, Greenbank Crescent, East Tullos, Aberdeen, AB12 3BGGoodwin Tanks
Pontefract Street, Derby, DE24 8JDGroup Four Glassfibre Co
Units 40-43 Church Road Business Centre, Murston, Sittingbourne, ME10 3RSHibernia Export Trading House
Designs, manufactures and installs equipment for the treatment of noxious, odorous and corrosive gases. Biological and chemical process gas treatment technology is available for sewerage installations and all types of industrial processes including VOC removal
51 Bracken Road, Sandyford, Dublin, Republic of Ireland
