Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Gas measurement
Gas measurement for industrial, environmental and process applications. Portable and fixed gas detectors, multi-gas analysers, sampling systems and sensors. Measures oxygen, toxic and flammable gases, CO2 and VOCs. Supports workplace safety, emissions monitoring, leak detection, air quality management and process control.
Gas measurement - helping you find the best solution for your project.
Promet EExd is a process moisture analyser for critical process gas applications. It offers single and dual channel moisture measurement, with integrated electronic pressure reading, within a single field-installed flameproof housing. User interface is provided through the bright vacuum fluorescent display and touch screen controls. Promet EExd is- PRODUCT
- Michell Instruments
The ZR800 oxygen analysers are designed for the rapid and accurate measurement of oxygen from low ppm levels to 100% in nearly all industrial gases and atmospheres. They incorporate a unique miniature zirconia ceramic oxygen sensor, which provides high accuracy, fast response, and a wide measuring range. This sensor is non-depleting and requires- PRODUCT
- Systech Instruments
MM500 moisture analysers provide absolute moisure measurement with accurate dependable results over a wide range. Designed to be customised to your application giving precise measurements using a phosphorus pentoxide (P2O5) moisture sensor. They are designed for use in process gas, heat-treating furnace, air dryer, chemical manufacturing- PRODUCT
- Systech Instruments
The updated TOCSIN 102 PhotoIonisation Gas Detector is used for the detection of VOC’s. It provides dynamic first response to gases and vapours and can be configured for one of over 400 substances. Photo-Ionisation detectors offer many advantages for VOC detection over other available technologies. They are able to measure Parts Per Billion (ppb- PRODUCT
- International Gas Detectors
MM300 is ideal when simple, accurate moisture measurement is required. Designed with the OEM user in mind, the MM300 transducer and monitor can be easily integrated into a wide range of systems. This two-wire loop powered dew point transmitter is designed for moisture measurement in gases. It is suitable for applications in the petrochemical- PRODUCT
- Systech Instruments
The XZR-500 oxygen sensor is designed to determine the excess of air required for optimum combustion. It uses zirconium oxide technology to measure levels of oxygen in harsh conditions such as boilers, incinerators and furnaces. Together with the XCU-500 analyser, it provides fast, accurate readings taken in the harshest conditions: reliable and- PRODUCT
- Michell Instruments
The MM400 moisture analysers offer advanced technologies in process gas measurement for maintenance-free analysis. Utilising an aluminium oxide ceramic sensor for moisture detection in the range -100 to +20 degrees dewpoint, or from trace levels to ambient air conditions. They are designed for precise moisture analysis in plastics manufacturing- PRODUCT
- Systech Instruments
The EC900 range of process oxygen analysers are accurate, reliable and flexible under the most demanding on-line operating conditions. It uses a variety of specially engineered electrochemical fuel cells to monitor oxygen within most industrial gases and atmospheres. Long life, maintenance-free, disposable oxygen sensors. Ambient air or traceable- PRODUCT
- Systech Instruments
The Easidew transmitter is a 2-wire dew point transmitter. Fully configured and calibrated, it can be instantly incorporated into an air or gas management and control system: 2-wire loop powered connection; dew point or ppm moisture content; IP66 (NEMA 4); excellent sensor protection; measurement range -100 to +20°C; operating temperature -40 to- PRODUCT
- Michell Instruments
The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion processes. Easy to install and operate, the FGA also calculates values for combustion efficiency, NOx and carbon dioxide. This
The PM700 paramagnetic analysers are designed for reliable, repeatable, accurate oxygen purity measurements with full percent range capability. Utilising the well proven magneto-dynamic transducer these analysers offer high performance oxygen analysis. Whatever your measuring range the PM700 range have an analyser to suit your requirement- PRODUCT
- Systech Instruments
TOCSIN 102 series gas detectors provide gas sensing capabilities for hazardous areas. It is capable of detecting flammable gases, oxygen and a wide range of toxic gases. Typical applications include: offshore platforms, refineries, petrochemical processing, process plant, ventilation, fuel distribution, gas storage, fuel storage, garage- PRODUCT
- International Gas Detectors
The TOCSIN 103 gas detector is used in industrial and commercial applications in normal non-hazardous area environments. The TOCSIN 103 is capable of detecting flammable gases, oxygen and a wide range of toxic gases. It is available as an analogue or addressable device to complement the IGD range of control equipment. Addressable interconnection- PRODUCT
- International Gas Detectors
Gas measurement - helping you find the best companies for your project.
AMETEK Land
Designs and manufactures flue gas combustion efficiency and environmental emissions monitoring instrumentation. A range of analysers provides both portable and continuous monitoring of CO, O2, CO2, NO, NO2, NOx, SO2, H2S, CxHy, smoke, dust, acid dewpoint temperature and turbine blade temperature. Special analysers can be designed to meet specific
Stubley Lane, Dronfield, S18 1DJEdinburgh Sensors
Offers gas monitors and OEM gas sensors for measuring a range of gases, in a wide range of concentrations. Each sensor is highly gas-specific and insensitive to other gases and water vapour. The companys products are designed to operate continuously for extended periods with minimal need for maintenance. All products are pre-calibrated in the
4 Bain Square, Kirkton Campus, Livingston, EH54 7DQInternational Gas Detectors
International Gas Detectors (IGD) has designed, manufactured, installed and serviced gas detection equipment for safety and control applications since 1919. The company’s product range encompasses gas detection systems, boiler efficiency monitors, building management sensors and ventilation controls. Using addressable technology allows up to 32
Triton House, Crosby Street, Stockport, SK2 6SHMichell Instruments
Manufactures impedance hygrometers, for dewpoint and moisture analysis in industrial applications. Available in transmitter, on-line or portable types. Applications include monitoring high purity industrial gases, pipeline drying, petrochemical refinery, heat treatment furnaces, leak detection, instrument air and coating processes. Cooled mirror
48 Lancaster Way Business Park, Ely, CB6 3NWShawcity
Shawcity Limited were established in 1976 and supply a variety of instrumentation for Health & Safety, Occupational Hygiene and Environmental applications. Whether your require to purchase a gas detection monitor, hire a PID orgas detector or you would like to have your current gas detection equipment serviced, our highly professional and
Instrument House, 91-92 Shrivenham Hundred Business Park, Watchfield, Shrivenham, Swindon, SN6 8TYSystech Instruments
Systech Illinois' process instruments are available in wall mounted IP66-rated, bench top and rack mounted versions. Capable of monitoring oxygen within most industrial gases and atmospheres, providing oxygen measurement from tace ppm levels up to high percentage levels. There is a gas analyzer, oxygen analyzer and moisture analyzer available for
17 Thame Park Business Centre, Wenman Road, Thame, OX9 3XATesto
Manufactures a professional flue gas analyser for all measuring tasks in the heating industry. The CO level in ambient air can be measured and gas leaks can be detected. A barcode pen ensures that the correct reading is allocated to the correct location. Data transmission is cableless, transmitted by infrared to the printer
Newman Lane, Alton, GU34 2QJ
