Industrial gas treatment

The RGi-xx24-2 refrigerant gas detector is comprised of a STAREX General ABS box (SD-0150) housing the electronic circuitry to detect the presence of the nominated refrigerant gas. The alarm threshold can be adjusted via the control panel. A red LED will illuminate, and an internal Piezo buzzer will sound, to indicate the detection of refrigerant

The FLIR GF320 infrared camera is capable of finding methane emissions or other volatile organic compounds (VOC). Can detect very small gas leaks in real time and is ideal for monitoring plant and equipment in hard to reach areas. FLIR GF320 visualises and pinpoints gas leaks in real-time and can scan large areas rapidly. Thousands of components

The FLIR GFx320 is an ATEX-certified infrared camera capable of finding methane emissions or other Volatile Organic Compounds (VOCs). It can detect even minor gas emissions and will quickly and effectively survey critical zones. Gases detected: Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane

Gas leaks are often invisible—but the FLIR G620a brings them into clear view with exceptional accuracy. Designed for fixed installation, this cooled OGI camera offers continuous monitoring, making it perfect for upstream and midstream facility applications: high-resolution IR sensor (640?×?512) with NETD <?15?mK @?25?°C enables visualisation of

The Aqualarm HDi-24 humidity detector is comprised of a STAREX General ABS box (SD-0150) housing the electronic circuitry to detect changes in the level of humidity and give an alarm signal should the humidity drop below the low level set point, or exceed any of the two high level set points. Levels can be set between 30 and 100% and are entered

SulfaTreat is an economical and reliable method of removing hydrogen sulphide (H2S), light mercaptan and other sulphur contaminant from a wide variety of air and gas vapours such as biogas / landfill gas. Large units containing many tonnes of SulfaTreat operating on a lead/ lag basis available for high H2S challenges. SulfaTreat provides

The Donaldson Torit® DCE® DFPRO collectors are dust and fume collection systems specifically engineered for various applications including plasma, autogenous and laser cutting. DFPRO collectors use oval filters making dust and fume filtration more efficient, compact and cost-effective. DFPRO designs range from a small 3-filter model to a large

Downflo Evolution dust collectors offer tailor-made compact dust filtration solutions which perform well.This results in fewer cartridge filters and in a smaller area compared to conventional dust collectors: airflow from 2,500 to 150,000 m³/h; compact size; innovative triagonal filter shape features more filter media; increased filter surface per

The Donaldson Torit® PowerCore® CP Series dust collector is able to handle fibrous and fluffy dust. Combined with PowerCore filter packs and proprietary compact oblique pulse cleaning system, the PowerCore dust collector delivers high filtration efficiencies. The PowerCore dust collector comes in two models: The CPC dust collector (stand-alone

The Metro MF 180 portable exhaust filter allows the operation of diesel and petrol engines in confined spaces. It has the advantage over fixed installations in that the vehicle or plant can be driven around the factory or workshop without having long flexible hoses that can limit movement. The Metro MF 180 comprises a high-efficiency pleated

The WSOFlex collector ensures a productive work environment by reducing coolant and machining oil mists in a compact package. The WSOFlex can be modified with a simple filter change, leading to leaner operation, cost savings and cleaner plant air. 3-in-1 solution for water-soluble, straight oil, and oily smoke applications; choice of coalescent

The Donaldson Torit® DCE® Downflo® Oval dust collector and fume extractor is a compact, high-efficiency collector using unique, oval-shaped filters. Compared to same-sized dust collectors, the DFO dust collector provides a 25% increase in airflow capacity, improved airflow path and 29% increase in pulse cleaning pressure. There are 26 Downflo Oval

Wet scrubbers are available in packed tower, fluidised bed and venturi formats. Packed tower scrubbers remove contaminants from the gas stream by passing it through a packed structure that provides a large wetted surface area where the gas and the scrubbing liquor react. Packed towers can also be used for air stripping to remove dissolved gases

The Donaldson Torit® DCE® Unicell cartridge dust collector accommodates a variety of applications and air volumes in small and large manufacturing facilities whilst conserving plant floor space. Unicell dust collector offers up to 25% more media via this highly efficient dust collection system: compact design conserving valuable manufacturing

The Donaldson DCE 100 Air Venting Filter is a compact and flexible filtration device ideal for venting small volumes of dust-laden air on bins, hoppers and vessels on conveying and material handling systems. The DCE 100 is also available with a plastic liner option especially for the food industry. All filters have anti-static features to allow

Cyclevent® mobile adsorbers comprise a combination of transport vessel and adsorber for air and gas phase applications, principally VOC removal. Cyclevent® eliminates the requirement for on-site carbon exchange. Units are supplied on a full service (or rental) basis, and are suitable for for short-term use, or as a preliminary system until a

Forbes offers a fluidised bed scrubber, which features two or more shallow beds and hollow ellipsoids that are fluidised by the gas stream. This is relatively fast moving system, compared to the velocity of the gas flow through a packed tower. The residence time of the gas in the tower is less than in a packed tower, but this is compensated by the

SB bulk tank vent scrubbers are designed to minimise the environmental problems caused by the storage and handling of fuming chemicals. They counter the release of chemical fumes during tank filling processes and in the ongoing storage of chemicals such as ammonia and hydrochloric acid. The scrubbers can handle gas flows up to 30m3/hour, which are

The Donaldson Torit® DCE® Dalamatic® is an automatic reverse-jet fabric filter baghouse dust collector. It is most suitable for continuous process applications involving heavy-duty product recovery, or collection of large concentrations of nuisance dust, where high collection efficiencies and dust control are required. The Dalamatic® dust

Forbes offers stripping towers that provide an effective and economical approach to many VOC contamination scenarios. They are suitable for use in springs and wells, as well as the dewatering of contruction sites and any other project where excavation water is too polluted to be disposed of without treatment. The stripping towers will reduce

Forbes offers wetted packed towers that provide a simple and common approach to gas scrubbing. They remove contaminants from the gas stream by passing the stream through a packed structure that provides a large wetted surface area to induce intimate contact between the gas and the scrubbing liquor. The contaminant is absorbed into or reacted with

The Donaldson Torit® DCE® Dryflo® mist collector is the first cartridge collector developed specifically for mist applications. It is designed to collect and filter oil, water-soluble and synthetic coolant mists from a variety of machining operations and other industrial processes, reducing the risks of mist related hazards. It can be used

The Donaldson Torit® DCE® Environmental Control Booth called ECB Work Station is ideal for finishing works on large and irregularly shaped parts. It is designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The booth design is complete with lighting

The Dryflo cartridge from Donaldson is specially designed for applications using straight oils, mineral oils, water-soluble, as well as synthetic and semi-synthetic coolants. It features a combination of two proprietary filtration media to remove oil and coolant mists from wet machining operations. Dryflo has a proprietary blend of synthetic