Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
GRP tanks
GRP tanks for storage and process applications in industrial, municipal and utilities projects. Corrosion-resistant vessels for chemicals, potable water, wastewater and fire water. Above- or below-ground, vertical or horizontal, single or double skin, bunded and sectional options. Accessories: manways, vents, fittings, insulation, level monitoring, dosing connections.
GRP tanks - helping you find the best solution for your project.
One piece GRP feed and expansion tanks
One piece GRP Feed and Expansion storage tanks tanks are supplied with bolted lids and foam lid sealers and are suitable for storing water upto 90 Deg C; insulated walls can be 25mm, 50mm or 75mm; standard sizes: 45-6,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
Two-piece GRP insulated water storage tanks
Two-piece tanks are designed for restricted access projects. Standard two-piece tanks are designed to fit through a standard 66 x 29" doorway. They have a smooth interior surface for easy cleaning and are resistant to bacteria, meaning low-cost maintenance. An inspection hatch is supplied on all tanks over 200 gallons. Standard two-piece tanks are
One piece GRP water storage tanks
GRP One Piece insulated cold water storage tank, complete with bolted lid and access hatch: one piece GRP water storage tanks; suitable for cold water, drinking water also known as potable water; standard sizes: 45-100,000 litres; tanks are supplied with bolted lids and foam lid seal between the tank and lid; bespoke sizes also available- PRODUCT
Drayton Tank & Accessories
Balance Tanks
One Piece GRP Balance Tanks and Two Piece GRP Balance Tanks are water storage units made from glass reinforced plastic, designed for balancing water levels in systems such as swimming pools. Available as single-piece or two-piece models, these tanks suit a range of installation spaces and capacities: water storage tanks made from glass reinforced- PRODUCT
Drayton Tank & Accessories
GRP insulated hot water and chemical storage tanks
One-piece GRP pre-insulated chemical storage tanks are supplied with insulated bolted lids with foam seals. Insulated walls can be 25 or 50mm thick (75 or 100mm on request). Ideal for most chemicals and hot water up to 120°. Used for condensation tanks, thermal stores, acid tanks and much more. Standard sizes: 45-100,000 litres; bespoke sizes available- PRODUCT
Drayton Tank & Accessories
GRP sectional water tanks
GRP sectional tanks are used for storing many different types of liquid including potable water, hot water, rainwater, chemicals, waste, grey water and sewage. They range from 45 to 90,000 litres and can be up to 3m high, with no restriction on length and width. 1000 x 1000mm panels are standard, with specific sizes available on request. Tanks can
F&E insulated GRP water storage tanks
Manufactured with GRP resins that are designed to withstand water temperatures up to 90°C. Finished with a Gelcoat internal surface to prevent bacterial growth, helping to keep the water as clean and fresh as possible. Insulation is encapsulated into the tank walls and lid, making the external finish cleaner. Supplied with a flange around the top- PRODUCT
Drayton Tank & Accessories
Open-top GRP water storage tanks
Open-top GRP water storage tanks, suitable for cold water: self-supported walls; tank only needs flat base to sit on; standard sizes: 1,000 to 2,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
BYELAW 30 GRP insulated water tanks
Byelaw 30 Water Tanks are insulated cold water storage tanks for domestic and commercial use, made from WRAS Approved materials and designed to meet UK water regulations for potable water: insulated cold water storage tanks for potable water meeting UK regulations; screened overflow, vent, and warning pipe fittings help prevent ingress of insects
Type AB air gap break tanks
Type AB Air Gap Water Tanks are used to store the volume of water displaced from people in a pool or spa, this is then pumped back into the pool when people leave: insulated water storage tanks with Type AB air gap for backflow prevention; insulated walls: 25mm, 50mm or 75mm; standard sizes: 45-100,000 litres in one piece balance tank design- PRODUCT
Drayton Tank & Accessories
One-piece GRP pre-insulated water storage tanks
One-piece tanks are available in standard sizes from 45 to 100,000 litres. Special sized tanks can also be made up to a maximum width of 3000mm, height of 2500mm, and length up to 14000mm. They are suitable for cold water storage up to 30°C. Drayton also offers tanks that can hold water up to 70°C constant (F&E tanks) and up to 100°C (chemical- PRODUCT
Drayton Tank & Accessories
GRP one-piece water tanks
GRP one-piece water tanks are made from high quality glass reinforced polyester resins to BS13280:2001 standard for potable and non-potable water storage. Tested and approved by WRAS, these tanks comply with UK water supply regulations 1999. Multiple sizes are available, with capacities from 40L to 1000L and internal dimensions specified for each
GRP Sectional Water Tanks - modular glass reinforced water storage tanks
Balmoral GRP Sectional Water Tanks are modular storage tanks for potable water, made from glass reinforced plastic panels and certified to BS EN 13280. Tank capacities range from 1m³ to 10,000m³, with heights up to 4m in 0.5m or 1m increments. All tanks are WRAS approved for potable drinking water and can be pre-insulated for water storage up to
PVT tanks, vessels and silos
PVT tanks, vessels and silos are made from GRP single-laminate composite, which protects the glass and resin structure from chemical corrosion. A range of laminates is available to suit individual specifications. PVT tanks, vessels and silos are light and easy to handle, and can be designed with integral steelwork such as ladders, handrailing
GRP one-piece tanks are WRAS approved and pre-insulated to protect contents from extremes of heat and cold. This reduces excessive temperature fluctuations, which would increase the risk of bacteria growth. They are suitable for cold water, hot water and chemical storage, and are manufactured from one of three different resins, depending on
Sectional water tanks are used for the storage of large volumes of cold water and are suitable for both potable and non-potable use. The panels in sectional water tanks are made from the composite material GRP (Glass Reinforced Plastic). This enables the tanks to be strong and solid. This type of water storage tank is appropriate for use in
Semi-sectional cisterns are designed for restricted-access situations, and provide a less expensive alternative to conventional sectional tanks. They save on installation costs and are easily erected. They are supplied in two pieces, which connect along a horizontal joint, and can be passed through a doorway for easy assembly on the other side
GRP tanks - helping you find the best companies for your project.
Drayton Tank & Accessories
Drayton Tank & Accessories provides WRAS-approved GRP storage tanks suitable for storing potable water, cold water, hot water, wastewater, sewage and other effluents, chemicals, and most other liquids. GRP storage tanks Tanks are manufactured according to BS EN 13280:2001. Single-piece tanks and two-piece horizontally-split tanks are available
- Products12
Unit 21, Oakwell Business Centre, Oakwell view, Barnsley, S71 1HXForbes
Manufactures GRP and thermoplastic storage tanks for liquids ranging from ultrapure water to hazardous chemicals. Tanks can have flat, sloping or conical bases, and be supplied with open or closed tops. One-piece tanks have capacities from 200 to 200,000 litres
Braithwaite Engineers
Manufactures GRP hot-pressed moulded sectional water tanks and one-piece water storage tanks to BS EN 13280: 2001
Unit A & B, Leeway House, Leeway Industrial Estate, Newport, NP19 4SLCamplas Technology
Manufactures helically wound storage and process tanks suitable for use with acids, chemicals, effluent, water and food stuffs in industrial and municipal applications. Tanks can be vertical, horizontal, above or below ground, with flat or sloping bases, and flat or domed covers. Open top tanks are also available
Heol Ffaldau, Brackla Industrial Estate, Bridgend, CF31 2XECHF Tanks
Supplies potable and non potable water tanks
Whinfield House, Centurion Way Industrial Estate, Leyland, PR25 4GUDecca Plastics
Decca Plastics' comprehensive range of British standard size storage units consists of DECCA one-piece from a nominal 18 litres to 9000 litres together with a range of nonstandard one-piece cisterns within their DECCA cm-range from 32 liters to 24000 litres. Additionally, the company can supply a full range of DECCA two-piece and DECCA sectional
Unit 2, Victoria Mill, Lincoln Street, Preston, PR1 6RE
