Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
GRP and thermoplastic storage tanks
(95)
GRP and thermoplastic storage tanks for water, wastewater and chemical containment in industrial, utility and municipal applications. Vertical, horizontal, bunded and double-skinned. Above- or below-ground. PE, PP and GRP construction. Fittings, vents, level monitoring, mixers, pipework and access platforms. For process storage, dosing, neutralisation and effluent management.
GRP and thermoplastic storage tanks - helping you find the best solution for your project.
One piece GRP feed and expansion tanks
One piece GRP Feed and Expansion storage tanks tanks are supplied with bolted lids and foam lid sealers and are suitable for storing water upto 90 Deg C; insulated walls can be 25mm, 50mm or 75mm; standard sizes: 45-6,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
V Notch Weir Tank - plastic tank for accurate wastewater flow measurement
Smart Storm V-Notch Weir Tank measures wastewater flow rates and is made from reinforced materials with an integrated sensor bracket. Two standard sizes measure flows up to 10L/s or 40L/s. Stub inlet and outlet sizes are 90mm or 150mm. Fully compliant to BS3680 and ISO 1438: flow measurement tank with v-notch weir and sensor bracket; high
Two-piece GRP insulated water storage tanks
Two-piece tanks are designed for restricted access projects. Standard two-piece tanks are designed to fit through a standard 66 x 29" doorway. They have a smooth interior surface for easy cleaning and are resistant to bacteria, meaning low-cost maintenance. An inspection hatch is supplied on all tanks over 200 gallons. Standard two-piece tanks are
GRP water break tanks
Break tanks play a crucial role in maintaining a reliable water supply in various systems. By storing a reserve of water, they help ensure that pumps can operate effectively without interruption. They also act as a buffer when the mains supply struggles to meet peak demand, preventing pressure drops and ensuring consistent flow: insulated water- PRODUCT
Drayton Tank & Accessories
One piece GRP water storage tanks
GRP One Piece insulated cold water storage tank, complete with bolted lid and access hatch: one piece GRP water storage tanks; suitable for cold water, drinking water also known as potable water; standard sizes: 45-100,000 litres; tanks are supplied with bolted lids and foam lid seal between the tank and lid; bespoke sizes also available- PRODUCT
Drayton Tank & Accessories
Balance Tanks
One Piece GRP Balance Tanks and Two Piece GRP Balance Tanks are water storage units made from glass reinforced plastic, designed for balancing water levels in systems such as swimming pools. Available as single-piece or two-piece models, these tanks suit a range of installation spaces and capacities: water storage tanks made from glass reinforced- PRODUCT
Drayton Tank & Accessories
GRP insulated hot water and chemical storage tanks
One-piece GRP pre-insulated chemical storage tanks are supplied with insulated bolted lids with foam seals. Insulated walls can be 25 or 50mm thick (75 or 100mm on request). Ideal for most chemicals and hot water up to 120°. Used for condensation tanks, thermal stores, acid tanks and much more. Standard sizes: 45-100,000 litres; bespoke sizes available- PRODUCT
Drayton Tank & Accessories
GRP sectional water tanks
GRP sectional tanks are used for storing many different types of liquid including potable water, hot water, rainwater, chemicals, waste, grey water and sewage. They range from 45 to 90,000 litres and can be up to 3m high, with no restriction on length and width. 1000 x 1000mm panels are standard, with specific sizes available on request. Tanks can
Circular polyethylene (MDPE) storage tanks (50-200 ltr)
Tanks are produced from food grade medium density polyethylene. They are offered in opaque white with volume measurements moulded into the side of the tank. Tanks are supplied with screwed caps and are suitable for cold water and a range of chemicals: made from food grade virgin (MDPE) medium density polyethylene; suitable for storing water and a- PRODUCT
Drayton Tank & Accessories
F&E insulated GRP water storage tanks
Manufactured with GRP resins that are designed to withstand water temperatures up to 90°C. Finished with a Gelcoat internal surface to prevent bacterial growth, helping to keep the water as clean and fresh as possible. Insulation is encapsulated into the tank walls and lid, making the external finish cleaner. Supplied with a flange around the top- PRODUCT
Drayton Tank & Accessories
Open-top GRP water storage tanks
Open-top GRP water storage tanks, suitable for cold water: self-supported walls; tank only needs flat base to sit on; standard sizes: 1,000 to 2,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials- PRODUCT
Drayton Tank & Accessories
BYELAW 30 GRP insulated water tanks
Byelaw 30 Water Tanks are insulated cold water storage tanks for domestic and commercial use, made from WRAS Approved materials and designed to meet UK water regulations for potable water: insulated cold water storage tanks for potable water meeting UK regulations; screened overflow, vent, and warning pipe fittings help prevent ingress of insects
Type AB air gap break tanks
Type AB Air Gap Water Tanks are used to store the volume of water displaced from people in a pool or spa, this is then pumped back into the pool when people leave: insulated water storage tanks with Type AB air gap for backflow prevention; insulated walls: 25mm, 50mm or 75mm; standard sizes: 45-100,000 litres in one piece balance tank design- PRODUCT
Drayton Tank & Accessories
One-piece GRP pre-insulated water storage tanks
One-piece tanks are available in standard sizes from 45 to 100,000 litres. Special sized tanks can also be made up to a maximum width of 3000mm, height of 2500mm, and length up to 14000mm. They are suitable for cold water storage up to 30°C. Drayton also offers tanks that can hold water up to 70°C constant (F&E tanks) and up to 100°C (chemical- PRODUCT
Drayton Tank & Accessories
GRP one-piece water tanks
GRP one-piece water tanks are made from high quality glass reinforced polyester resins to BS13280:2001 standard for potable and non-potable water storage. Tested and approved by WRAS, these tanks comply with UK water supply regulations 1999. Multiple sizes are available, with capacities from 40L to 1000L and internal dimensions specified for each
VTS sloping-base thermostatic storage tanks
The VTS thermostatic storage tanks are manufactured using either polypropylene or high density polyethylene (HDPE). Both materials offer a high degree of chemical resistance to a wide range of chemical products. VTS models offer sloping bases with integral supporting skirts for complete drainage with capacities ranging from 225 to 6750 litres as
VTF flat-base thermostatic storage tanks
VTF thermostatic storage tanks are manufactured using either polypropylene or high density polyethylene (HDPE), both materials offer a high degree of chemical resistance to a wide range of chemical products. Flat-based tanks are available in capacities ranging from 225 to 9000 litres as standard. Can be supplied with either plain open tops or with
Minibulk® Plus chemical storage system
Minibulk® Plus chemical storage systems are suitable for deliveries by high-pressure discharge (up to 30 psi). Six standard sizes with tank capacities from 10,000 to 30,000 litres. Minibulk®Plus systems are made from thermoplastic and GRP dual laminate with a polypropylene, UPVC or PVDF inner shell. They are also available in chop-hoop wound GRP
GRP Sectional Water Tanks - modular glass reinforced water storage tanks
Balmoral GRP Sectional Water Tanks are modular storage tanks for potable water, made from glass reinforced plastic panels and certified to BS EN 13280. Tank capacities range from 1m³ to 10,000m³, with heights up to 4m in 0.5m or 1m increments. All tanks are WRAS approved for potable drinking water and can be pre-insulated for water storage up to
Minibulk® chemical storage system
Minibulk® chemical storage systems allow users to take delivery from tankers or lorry-mounted IBCs by low-pressure discharge (up to 14 psi) with the minimum of danger and no rental or cleaning charges. The systems remove the dangers associated with manual lifting, reduce exposure to chemicals, and provide the assurance of bunded containment
Dual laminate GRP tanks
Dual laminate GRP tanks combine the strength of GRP with the chemical resistance of a thermoplastics inner shell. They are suitable for use in a range of industries, including chemicals, food, microelectronics, and offshore oil and gas. A range of thermoplastic inner shell materials is available to accommodate different chemical resistance and
VTC conical-base thermostatic storage tanks
The VTC thermostatic storage tanks is manufactured using either polypropylene or high density polyethylene (HDPE). Both materials offer a high degree of chemical resistance to a wide range of chemical products. VTC tanks have conical bases with integral supporting skirts and centre outlets for complete drainage with capacities ranging from 225 to
PVT tanks, vessels and silos
PVT tanks, vessels and silos are made from GRP single-laminate composite, which protects the glass and resin structure from chemical corrosion. A range of laminates is available to suit individual specifications. PVT tanks, vessels and silos are light and easy to handle, and can be designed with integral steelwork such as ladders, handrailing
GRP one-piece tanks are WRAS approved and pre-insulated to protect contents from extremes of heat and cold. This reduces excessive temperature fluctuations, which would increase the risk of bacteria growth. They are suitable for cold water, hot water and chemical storage, and are manufactured from one of three different resins, depending on
