Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
FDA approved valves
(12)
FDA-approved valves for hygienic control, isolation and non-return in food, beverage, dairy, pharmaceutical and biotech processing. Sanitary ball, butterfly, diaphragm, check and control valves in 316L stainless steel with PTFE or EPDM seals. Tri-clamp connections, CIP/SIP, crevice-free designs.
FDA approved valves - helping you find the best solution for your project.
GEMÜ R481 - metal pneumatic butterfly valve for liquid flow control
GEMÜ R481 Victoria is a soft-seated metal butterfly valve with a metal actuator, designed for pneumatic operation in flow control applications. Made from SG iron with epoxy coating, it supports wafer, lug and U-section body types, and suits a wide range of pipe standards and sizes from DN 25 to 600. Suitable for use with various liner and disc
GEMÜ 650 BioStar pneumatically-operated diaphragm valve
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally
GEMÜ 567 BioStar aseptic and precision control valve
The GEMÜ 567 BioStar is a diaphragm globe control value designed for precision flow and dosing in aseptic applications, including biotechnology, food, beverage and pharmaceuticals industries. Typical uses include the control of sterile steam and air, feed and discharge control in bioreactors, and dosing of liquids and gases
GEMÜ B44 pneumatically-operated ball valve
The GEMÜ B44 3-piece 2/2-way metal ball valve is pneumatically operated. The 1.4435 stainless steel alloy material composition used for the ball valve body (compliant with 316L) with a low delta ferrite proportion of <3% is particularly suited to applications in the supply sector for the pharmaceutical, foodstuffs processing and biotechnology
GEMÜ R480 Victoria - bare shaft butterfly valve
The GEMÜ R480 Victoria soft seated metal butterfly valve is equipped with a bare shaft with top flange in accordance with EN ISO 5211. The butterfly valve is available in nominal sizes DN 50 to 300 and in standardised installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions
The Type 2103 is a pneumatically operated, externally piloted diaphragm valve designed for usage in hygienic or aggressive environments. It is part of Bürkert's modular range of ELEMENT valves and sensors. The valve consists of a pneumatically operated piston actuator, a diaphragm and a 2-way valve housing made of cast stainless steel. The design- PRODUCT
- Bürkert Fluid Control Systems
Type 2063 is a pneumatically operated diaphragm valve with stainless steel actuators designed for the demands of tough process environments. Type 2063 is designed for use in the demanding process environments found in hygienic sectors, such as pharmaceutical, bio-pharmaceutical, cosmetic, and food and beverage- PRODUCT
- Bürkert Fluid Control Systems
Type 2060 is a pneumatically operated angle seat valve with stainless steel actuators designed for the demands of tough process environments. Type 2063 is designed for use in the demanding process environments found in hygienic sectors, such as bio-pharmaceutical, breweries, and food plants- PRODUCT
- Bürkert Fluid Control Systems
The 3233 manually-operated diaphragm valve in compact form consists of a flow-optimised cast stainless steel body with various surface finishes, a diaphragm and a manual actuator. It is suitable for neutral gases and liquids, high purity, sterile, viscous, aggressive or abrasive fluids: material combinations are selectable; diaphragm is both a- PRODUCT
- Bürkert Fluid Control Systems
The Type 2033 tank bottom valve system is designed for control of ultrapure, sterile, aggressive or abrasive fluids. It enables optimal filling and emptying of vessels with less dead leg. The valve body consists of a machined stainless steel block with no weld seam. It has two welding bevels to ease the welding and valve positioning operations- PRODUCT
- Bürkert Fluid Control Systems
FDA approved valves - helping you find the best companies for your project.
GEMÜ Valves
Manufactures ball, butterfly, check, diaphragm, globe and solenoid valves. Actuator options include electromagnetic, pneumatic, motorised and manually operated valves. Body material varies to suit application. Aseptic stainless steel diaphragm valves are suitable for pharmaceutical, food, beverage and bio-tech applications
10 Olympic Way, Birchwood, Warrington, WA2 0YL
