Polycompact® polymer makeup systems are used to meter and dose polyelectrolytes to help flocculate / bind suspended solid particles in water. This makes waste water treatment processes more efficient - easier, faster and more cost-effective.
Polycompact® polymer makeup units are available for both Powder grade (up to 120kg/hr) and Emulsion grade (up to 150 kg/hr) polymers.
All Polycompact® polymer makeup units are modern and compact. They provide a very consistent and accurate makeup concentration through state-of-the-art metering and dosing technology. Water flow and pressure fluctuations are dealt with automatically. The Polycompact® range all feature a touchscreen HMI and PLC from whether Rockwell (Alan-Bradley) or Siemens and are completely automatic in their operation.
- Modern compact polymer makeup systems
- Powder grade polymers up to 120kg/hr
- Emulsion grade polymers up to 150 kg/hr
- Very consistent and accurate makeup concentration
- State-of-the-art metering and dosing technology
- Water flow and pressure fluctuations are dealt with automatically
- Touchscreen HMI and PLC
- Fully automated
- Dry protection for the extraction pump
- Automatic shut down function in case the water flow becomes too low
Liquid polymer dosing process
The Polycompact® FWA polymer dosing system is designed for the automatic preparation of an identically concentrated polymer parent or post solution with an exact concentration specification in a two chamber process.
The liquid polymer is dosed with a progressive cavity pump into an injection point with a check valve in the water line. The polymer is optimally moistened and mixed with water to ensure it is used as economically and effectively as possible.
The not yet matured solution is then guided through a static mixer and a specially designed mixing block, to be homogenised before entering the chamber as an available product.
In the chamber, a level sensor is installed to control the preparation automatically. If the level in the chamber falls below a minimum value after solution has been extracted, the unit begins to prepare new solution until the maximum level in the chamber is reached.
From the chamber, via down-stream pumps, the fully matured solution is directed towards its points of application.
Polycompact® polymer makeup units can be fitted and installed into a standard ISO shipping containers for convenience and security.
Sale or hire
Polycompact® polymer makeup units can be purchased or
A selection of polymer units available (both stand alone and containerised) for hire for temporary trials and/or short-term requirements.
Polymer makeup accessories
MSE Hiller polymer makeup accessories include:
- Big Bag Handling systems for use with up to 1,000kg bags
- Powder conveyor systems, reducing manual handling requirements at site