New entries

Sanitaire Taron activated sludge filter is a compact filtration system for wastewater treatment plants, designed to separate biological solids from activated sludge. System uses rotating vertical discs with micro mesh panels to form a dynamic sludge cake layer for solids removal. Installs directly in bioreactors or as a bolt-on unit, reducing

Leopold FilterWorx gravity media filtration system is designed for water and wastewater treatment, desalination pretreatment, and water reuse. Removes particulates, turbidity, organics, iron, manganese, and nutrients. Suitable for new or existing installations with multiple underdrain and media options: gravity media filter for potable water

SpiroGrit grit washer is designed to remove sand and grit from wastewater while washing out organic matter. Achieves a grit output with less than 10% moisture and under 3% volatile solids. Captures particles as small as 0.2mm with 95% efficiency. Available as a standalone unit or as part of a compact Combo pre-treatment line for space savings

Girapac rotating drum screen is a fully enclosed, stand-alone screening machine for small wastewater flows, made for municipal applications. Handles flows from 45m3/hr to 225m3/hr. Uses a wedge wire drum with mesh sizes from 0.25mm to 2.5mm for efficient removal of solids, sand, and grease. Includes a screw compactor to reduce waste volume and

Sandkleer Pressure Sand Filters are designed to remove fine suspended solids from potable, process and irrigation water: polishing filter on potable water treatment plants where mixing, flocculation and sedimentation stages typically precede the Sandkleer; removal of suspended solids from process and irrigation water

GiroSand Moving Bed Sand Filters are continuous backwash, up-flow sand filters. They are used for removal of fine suspended solids from water where higher solids loads are encountered and where continuous supply of uniform, high quality filtrate is required. Applications GiroSand Moving Bed Sand Filters are commonly installed as polishing filters

Superior Filtration's AGF Autonomous Gravity Sand Filter is a mechanical rapid gravity sand filter. It is a polishing filter used for the removal of fine suspended solids from water. It requires no external control system or electrical supply and the backwash cycle initiation occurs autonomously and is driven entirely by built-in hydraulic design

KFS Self-Cleaning Suction Filters are in-line, automatic self-cleaning filters. They are designed for installation on the suction side of pumps to minimise the impact of the filter on the supply of water to the pump. They are used for the removal of suspended solids from water. They offer continuous flow and a strong, positive backwash action that

Superior Filtration's GraviFilter is a highly efficient gravity (non-pressurised) screen filter with an integral, continuous cleaning mechanism (self-cleaning). It is used for the removal of suspended solids from water. It is effective in the removal of soft, fibrous and organic solids and it operates efficiently in process systems with higher solids loads

Kleerflo Filters are in-line, pressurised, automatic self-cleaning filters. They are used for the removal of suspended solids from water. They offer continuous flow and a strong, positive backwash action that ensures thorough cleaning of the screens. Kleerflo’s unique design with no rotating parts or close tolerance elements, very few moving parts

Fibrotex™ is a range of compact, fully automatic, self-cleaning fibrous depth filtration systems, designed to eliminate or reduce particulates in aqueous feed streams. They are used either before a process or before discharge from a process. Fibrotex™ can use water from boreholes, rivers and canals, minimising the consumption of mains water. The

PolyClay® is a powdered, semi-granular wastewater treatment formula made from natural minerals, designed to remove contaminants from industrial wastewater. Developed by CTECH Europe, it uses pH adjustment, precipitation, ion exchange, coagulation, and flocculation to target substances such as heavy metals, oils, dyes, and suspended solids

CPS Custom Process System is a bespoke wastewater treatment system designed for industrial effluent, spent solutions, and emulsions. Made from stainless steel, polypropylene, polyethylene, or GRP. Handles volumes from 5m³ to 500m³ per day. Standard throughput up to 25m³ per hour. Batch sizes range from 2000L to 15000L. Uses PolyClay® technology

Dissolved Air Flotation (DAF) Clarification by FLI CAP Technology is a high-performance system designed to remove suspended solids, fats, oils, and grease from industrial effluent. Units are sized for industrial sites with flow rates from 5–135m³/hr. Integrated chemical dosing, flocculation, sludge removal, and automated operation support

FLI CAP Technology screening and filtration systems remove solids, fibres, food waste and debris from industrial effluent before downstream treatment. Designed for high flow rates, these systems use 1mm rotary drum screens, internally-fed screens and compaction units to protect pumps and process equipment and reduce sludge production: solids