Clarifiers

Multiflo™ clarifiers with lamella settlers are used for the clarification and polishing of water and the treatment of wastewater. Systems are compact and flexible, and can be used in small- to large-sized plants to treat any kind of water characteristics and pollutant loads. Multiflo™ Softening and Multiflo™ Carb can be used for softening and polishing to a high water quality

Actiflo™ is a compact, high-performance clarifier used for the treatment of water and municipal and industrial wastewater. It can eliminate up to > 99% turbidity, suspended solids and associated pollutants. Characterised by very short hydraulic residence time and high process stability, the process is fully automated and requires minimum maintenance

Colloide uses lamella settlers within its lamella clarifier systems, which greatly increases the clarifier capacity and enables a much greater flow to be treated in the same footprint as conventional clarification. Their design also ensures maximum efficiency in terms of upward flow velocities. The lamella settlers can be used in new builds and

Struvia™ phosphorus recovery system recovers and reuses phosphorus from wastewater and concentrated industrial water. Converts phosphorus in effluent into struvite crystals for use in fertilisers and animal feed. Reduces reliance on mined phosphorus and helps manage sludge disposal and maintenance costs: recovers phosphorus from municipal

The Lamella sedimentation settler is designed for all applications where sedimentation is the preferred technology. It offers lower capital costs witha smaller footprint than conventional settlement clarifiers. The Lamella sedimentation settler has a stainless steel tank that contains plastic plates inclined at an optimum 60º angle. They can be

The Supercell™ clarifier is suitable for all process water clarification applications in the paper industry and can be used with high flow industrial effluents for tertiary treatment. It works on a "zero velocity" water distribution/recovery concept, allowing perfect clarification over high flows with a minimal hydraulic turbulence in a shallow

2H Water Technologies manufactures the TUBEdek® settlers for drinking water purification, wastewater treatment, surface water treatment and solids/liquid separation. All TUBEdek® products can be easily adapted to suit process design requirements, by varying the inclination, length of the tube and the module size. 2H's production technology allows

Waters laden with suspended solids (silty water) can cause significant environmental damage to aquatic ecosystems if allowed to escape. The treatment of such waters is determined by the settling characteristics of the solids within the influent waters and the discharge criteria that is trying to be achieved (how clean the water needs to be). OSSO

Powerplas sludge cones can be manufactured from fabrics that are WRAS approved or from standard PVC. The top ring and base cone are fabricated from 304 stainless steel. The cones have a reinforced top and have stainless steel eyelets. All seams are high frequency welded to ensure that the product is water tight. A standard range of cones is

2H Water Technologies manufactures the TUBEdek® FS 41.84 PP and PVC settler for drinking water purification, wastewater treatment, surface water treatment and solids / liquid separation. The FS 41.84 offers excellent solids removal in primary and secondary settlement tanks in municipal wastewater lamella clarifiers. All TUBEdek® products can be

The Unicell™ low-flow DAF clarifier provides efficient sludge removal and clarification of heavy and fatty effluents. Typical applications include oil and fat removal without chemical treatment, food industry effluents with high solids concentrations and sludge thickening. Key features: high retention time and special hydraulic design for chemical

Bagnall has a fleet of lamella tube clarifiers / settlers available for stand-alone hire for a variety of applications. They are also used during site operations as part of the company's complete trickling filter refurbishment package

2H Water Technologies manufactures the TUBEdek® FS 41.50 PP and PVC settler for drinking water purification, wastewater treatment, surface water treatment and solids/liquid separation. The FS 41.50 is ideal for the removal of sludge, sand and silt in surface water. All TUBEdek® products can be easily adapted to suit process design requirements, by