New entries

Wedeco MiPro eco3 advanced oxidation process (AOP) is a water treatment system designed to remove persistent organic and inorganic micropollutants from water. Combines ozone and hydrogen peroxide dosing to generate hydroxyl radicals for high-efficiency pollutant breakdown. Includes a residual ozone destruction unit and is suitable for a wide range

Leopold Clari-Vac floating sludge collector is designed to remove sludge, algae, oil, grease, and organics from potable water and wastewater tanks. Uses a floating bridge and stainless steel siphon headers to collect material with minimal energy use. No moving parts are submerged. Made from nonferrous metals for corrosion resistance. Suitable for

Sanitaire CASPERON Solution with VEMA Controller is a control system for conventional activated sludge wastewater treatment, designed to optimise nutrient removal and energy efficiency in mixing-limited aeration basins. Maintains precise dissolved oxygen control using pulsed aeration for consistent effluent quality and reduced chemical use

APEX Biodigester sewage treatment plants are made from corrosion-free materials for off-mains sewage treatment where septic tanks are unsuitable. Designed for intermittent, low, or seasonal flows, these plants use a single-tank system with automatic settled sludge return and achieve high effluent quality with very low electricity use. EN 12566-3

FilterPod Non-Electric Sewage Treatment Plant treats domestic sewage without electricity, using natural air currents and filtration. Designed for off-grid or eco-friendly sites, it uses RDX filter media to support aerobic bacteria that break down pollutants. Annual partial filter media replacement is required, with full replacement every 10 years

CYCLONE MBBR Sewage Treatment Plant is a wastewater treatment system for domestic and commercial sites, using a Moving Bed Biofilm Reactor process. Made from a single-piece tank with no internal moving parts. Reduces phosphate to less than 1mg/L and achieves up to 97.9% pollutant reduction. Certified to EN 12566-3 for up to 6,000 people

VORTEX Sewage Treatment Plant is an adjustable, eco-electric system for domestic and small commercial wastewater treatment. Designed for populations from 4 to 50 people, it uses a hand-turn valve to match varying occupancy. Achieves up to 98.9% pollutant reduction and operates at only 30W per hour. Approved by the Environment Agency and British

QUANTUM low cost sewage treatment plant is a compact domestic wastewater system made in the UK, designed for small properties. Uses an advanced activated sludge process to treat sewage and discharge clear effluent. Achieves up to 97.3% pollutant reduction and ammonia levels down to 1.8mg/L. Available in three models: QUANTUM 6, QUANTUM 8, and

HydraSieve is a static screen made for solid/liquid separation in municipal, industrial, and food processing settings. Uses a wave-shaped screen plate with triangular bars and no moving parts. Operates quietly and only needs periodic cleaning. Available in 24", 48", and 72" models with slot openings from 0.25mm to 1.5mm: static screen for

ANDRITZ passive water intake screens are made for abstraction of drinking water, desalination, and power plant applications. Designed to protect aquatic life and comply with environmental regulations, these screens use wedge wire technology with a large open area and precise slot openings. Fully welded construction supports long service life and

ANDRITZ decanter centrifuge D is a sludge centrifuge made from advanced wear-resistant materials for solid-liquid separation in wastewater and sludge treatment. Handles dewatering and thickening of various sludge types and flow rates. Energy-saving design reduces power use by up to 30%. Includes safety systems and low-noise, low-vibration

TITAN MBR™ (Membrane Bioreactor) Flat-Plate Membranes (MF) maintain high permeability and flux rates even at peak-day rates. They stack within a fully submerged module inside the aeration zone. Transmembrane pressure created by gravity drives the flow through the membranes. Clean water discharges while blocked solids remain in the aeration zone

PISTA INVORSOR Enhanced Vortex Grit Removal System is a high-efficiency grit removal unit for wastewater treatment, capturing particles down to 75 microns. Designed for flows up to 50MGD, it uses a combination of inclined plate settling and forced vortex action for consistent fine grit removal across all flow conditions. Variable inlet and outlet

S&L FAST® Fixed Activated Sludge Treatment System is a fixed-film, aerobic wastewater treatment system using submerged media for biological treatment. Designed for variable load and flow conditions, it handles flows up to 1,000,000GPD and is supplied as factory-built or field-installed modules in steel or concrete. Internal settling zones and high

ELIQUO HYDROK IFAS (Integrated Fixed-Film Activated Sludge) system is a wastewater treatment solution designed to increase plant capacity and efficiency. Uses Biotextil Cleartec media made from 100% polypropylene and Aquaconsult AEROSTRIP® diffusers. Prevents blockages and reduces energy use by maintaining optimal biomass growth and oxygen supply