Industrial storage tanks

One Piece GRP Balance Tanks and Two Piece GRP Balance Tanks are water storage units made from glass reinforced plastic, designed for balancing water levels in systems such as swimming pools. Available as single-piece or two-piece models, these tanks suit a range of installation spaces and capacities: water storage tanks made from glass reinforced

Smart Storm V-Notch Weir Tank measures wastewater flow rates and is made from reinforced materials with an integrated sensor bracket. Two standard sizes measure flows up to 10L/s or 40L/s. Stub inlet and outlet sizes are 90mm or 150mm. Fully compliant to BS3680 and ISO 1438: flow measurement tank with v-notch weir and sensor bracket; high

One piece GRP Feed and Expansion storage tanks tanks are supplied with bolted lids and foam lid sealers and are suitable for storing water upto 90 Deg C; insulated walls can be 25mm, 50mm or 75mm; standard sizes: 45-6,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials

GRP sectional tanks are used for storing many different types of liquid including potable water, hot water, rainwater, chemicals, waste, grey water and sewage. They range from 45 to 90,000 litres and can be up to 3m high, with no restriction on length and width. 1000 x 1000mm panels are standard, with specific sizes available on request. Tanks can

One-piece tanks are available in standard sizes from 45 to 100,000 litres. Special sized tanks can also be made up to a maximum width of 3000mm, height of 2500mm, and length up to 14000mm. They are suitable for cold water storage up to 30°C. Drayton also offers tanks that can hold water up to 70°C constant (F&E tanks) and up to 100°C (chemical

Type AB Air Gap Water Tanks are used to store the volume of water displaced from people in a pool or spa, this is then pumped back into the pool when people leave: insulated water storage tanks with Type AB air gap for backflow prevention; insulated walls: 25mm, 50mm or 75mm; standard sizes: 45-100,000 litres in one piece balance tank design

One-piece GRP pre-insulated chemical storage tanks are supplied with insulated bolted lids with foam seals. Insulated walls can be 25 or 50mm thick (75 or 100mm on request). Ideal for most chemicals and hot water up to 120°. Used for condensation tanks, thermal stores, acid tanks and much more. Standard sizes: 45-100,000 litres; bespoke sizes available

Two-piece tanks are designed for restricted access projects. Standard two-piece tanks are designed to fit through a standard 66 x 29" doorway. They have a smooth interior surface for easy cleaning and are resistant to bacteria, meaning low-cost maintenance. An inspection hatch is supplied on all tanks over 200 gallons. Standard two-piece tanks are

Tanks are produced from food grade medium density polyethylene. They are offered in opaque white with volume measurements moulded into the side of the tank. Tanks are supplied with screwed caps and are suitable for cold water and a range of chemicals: made from food grade virgin (MDPE) medium density polyethylene; suitable for storing water and a

Byelaw 30 Water Tanks are insulated cold water storage tanks for domestic and commercial use, made from WRAS Approved materials and designed to meet UK water regulations for potable water: insulated cold water storage tanks for potable water meeting UK regulations; screened overflow, vent, and warning pipe fittings help prevent ingress of insects

GRP One Piece insulated cold water storage tank, complete with bolted lid and access hatch: one piece GRP water storage tanks; suitable for cold water, drinking water also known as potable water; standard sizes: 45-100,000 litres; tanks are supplied with bolted lids and foam lid seal between the tank and lid; bespoke sizes also available

Break tanks play a crucial role in maintaining a reliable water supply in various systems. By storing a reserve of water, they help ensure that pumps can operate effectively without interruption. They also act as a buffer when the mains supply struggles to meet peak demand, preventing pressure drops and ensuring consistent flow: insulated water

Manufactured with GRP resins that are designed to withstand water temperatures up to 90°C. Finished with a Gelcoat internal surface to prevent bacterial growth, helping to keep the water as clean and fresh as possible. Insulation is encapsulated into the tank walls and lid, making the external finish cleaner. Supplied with a flange around the top

Open-top GRP water storage tanks, suitable for cold water: self-supported walls; tank only needs flat base to sit on; standard sizes: 1,000 to 2,000 litres; bespoke sizes also available; manufactured to BS EN 13280; made from WRAS-approved materials

Siltbuster offers the MT range of mix tanks, which are available on a sale or hire basis. The mix tanks are typically used in conjunction with Siltbuster's dosing skids, containerised dosing systems, clarifiers or DAF treatment systems. The tanks can be provided either as a stand-alone unit or as part of a complete water treatment package

Salt saturators are made from corrosion-resistant GRP and provide a constant, controllable supply of saturated brine solution. They contain layers of graded gravel under a bed of salt, which is covered by a constant head of water. The water dissolves the salt and, filtering through the gravel, emerges as clean, saturated brine. Salt saturators are

The VTS thermostatic storage tanks are manufactured using either polypropylene or high density polyethylene (HDPE). Both materials offer a high degree of chemical resistance to a wide range of chemical products. VTS models offer sloping bases with integral supporting skirts for complete drainage with capacities ranging from 225 to 6750 litres as

Minibulk® Plus chemical storage systems are suitable for deliveries by high-pressure discharge (up to 30 psi). Six standard sizes with tank capacities from 10,000 to 30,000 litres. Minibulk®Plus systems are made from thermoplastic and GRP dual laminate with a polypropylene, UPVC or PVDF inner shell. They are also available in chop-hoop wound GRP

Minibulk® chemical storage systems allow users to take delivery from tankers or lorry-mounted IBCs by low-pressure discharge (up to 14 psi) with the minimum of danger and no rental or cleaning charges. The systems remove the dangers associated with manual lifting, reduce exposure to chemicals, and provide the assurance of bunded containment

GRP one-piece water tanks are made from high quality glass reinforced polyester resins to BS13280:2001 standard for potable and non-potable water storage. Tested and approved by WRAS, these tanks comply with UK water supply regulations 1999. Multiple sizes are available, with capacities from 40L to 1000L and internal dimensions specified for each

Dual laminate GRP tanks combine the strength of GRP with the chemical resistance of a thermoplastics inner shell. They are suitable for use in a range of industries, including chemicals, food, microelectronics, and offshore oil and gas. A range of thermoplastic inner shell materials is available to accommodate different chemical resistance and

Balmoral glass fused to steel tanks are made from steel panels coated with a vitreous enamel glass layer, designed for storing potable water and municipal wastewater. Enamel powder coating achieves high purity and chemical resistance. Three variations are available: GFS, and GFS Premium Plus: steel tanks with a glass enamel coating for water and

Sattler double membrane gas holders are low-pressure dry gas storage tanks designed for sewage treatment plant, industrial waste and farm waste applications. They have a low maintenance and easily installed design, and call for only low running costs. Sattler gas holders comprise an external membrane that forms the visible outer round contour of

The VTC thermostatic storage tanks is manufactured using either polypropylene or high density polyethylene (HDPE). Both materials offer a high degree of chemical resistance to a wide range of chemical products. VTC tanks have conical bases with integral supporting skirts and centre outlets for complete drainage with capacities ranging from 225 to