Industrial automation and control

The Type 990 is a signal processing unit that takes a signal from an input device such as a level sensor, normally situated in a vessel. It provides an analogue and digital retransmission output, which is generally used for indication, control or alarm applications. The unit accepts signals from a wide range of remote instruments, including the

TOC-625 is a multi-channel gas detector controller that can control up to eight devices. It can be used with any TOCSIN addressable gas detectors and with up to two I/O modules. The controller features an Auto-Setup function which enables the auto-configuration of the detector ranges, alarm levels and actions. It can be used for the detection of

The 8640 valve unit system is designed to control and automate pneumatic valves in process applications. It features systematic modular construction and a combination of pneumatic and electrical interfaces, meaning that it can be used to solve a diverse range of problems. By putting together a row of pneumatic modules with different numbers of

Type 8650 AirLINE Ex is a modular electrical and pneumatic automation system for use in hazardous areas (Zone 1/ 21). The system combines both pneumatic and electronic signals, such as analogue and binary I/O. The system embraces all fieldbus protocols, as well as various others including Profibus DP and PA, Profinet, Foundation fieldbus, Control

Cube67 is a modular, distributed I/O system that uniquely combines IP20 and IP67 protection. It is plug-connected, robust and fully encapsulated. Starting at the bus coupler, the I/O layer spreads radially throughout the application. The hybrid system cable connections for power supply and communication between individual components in the system

Festos solenoid valve terminal portfolio includes pneumatic and electrical components for perfect networking. Valve terminals are available for central, decentralised or a hybrid concept applications, whether modular or compact. All Festo solenoid valve terminals have the following features in common: pre-assembled and tested units configured to

LB remote I/O stations are mounted in hazardous areas Zone 2/Class I, Div. 2 or Zone 22 or in the safe area. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. LB remote I/O connects your conventional sensors and actuators to your DCS using a single, standardised fieldbus

FB Remote I/O stations are mounted in hazardous areas Zone 1 or Zone 21. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. FB Remote I/O connects your conventional sensors and actuators to your DCS, using a single standardised fieldbus connection (Profibus, Modbus or a choice

The TOCSIN 903 ATEX Control Panel provides a local display and control facility for the TOCSIN 102 series or or pellistor gas detectors, which are used in Zone 1 and 2 hazardous areas. It is equipped as a 4-20mA process transmitter and can also be fitted with serial digital addressable capability either using the IGD data highway to integrate to a

TOCSIN i700 is a control panel for controlling gas detectors in ATEX and safe areas. The panel has an updated ABS housing, giving it a modern appearance, as well as new mounting options and additional options for built-in battery back-up and interfacing. The i700 is available in 3 variants, all of which can now work with up to 64 addressable

Fike has the most advanced control systems available in today’s explosion protection market. Fike’s Detection and Control Systems are pre-configured to recognize danger signs and make important decisions about when to activate explosion isolation and/or explosion suppression systems, effectively preventing an explosion from damaging your equipment

The TOCSIN 640 Addressable Detector Control Panel is a multi-channel detector controller. The system can be used with any of the Tocsin Addressable range of detectors or I/O modules, to control up to 24 devices as gas detectors or I/O Modules. It is easy to install set up with wall and panel mount options are available. The rear enclosure can be

FOUNDATION fieldbus H1 (FF H1) supplies power and transmits communication digitally between host systems such as a DCS or a PLC and field instrumentation. Status information and control commands are transmitted between up to 31 participants connected to the same cable. Fieldbus is more than just pure process control. Remote configuration, asset

Profibus PA is part of the popular Profibus family of protocols. Data formats are the same as in Profibus DP, making it easy to integrate devices on both networks seamlessly and transparently. Profibus PA is a fieldbus according to IEC 61158-2 and supplies power and transmits communication digitally between host systems, such as a DCS or PLC, and

Type 8741 is a device platform that can integrate several sensor-actuator modules in heat treatment and glass forming burner applications

MVK compact field active I/O modules are mainly composed of fieldbus modules with IP67 protection. The fieldbus modules replace complex wired and expensive terminal boxes, as well as conventional parallel wiring. The use of fieldbus modules saves a lot of space in the control cabinet, enabling them to be placed close to the process to establish

VisuNet industrial workstations are designed for use in harsh and hazardous industrial environments. Certifications are available for operation either in Zone 1/21 and 2/22, or Class I, Div. 1 and Div. 2 areas. For more demanding applications such as GMP and cleanroom conditions, specific design variants are available. Industrial workstations

The Type ME43 fieldbus gateway is the central control unit for Bürkert products (valves, sensors, mass flow controllers or displays), which are based on EDIP (“Efficient Device Integration Platform”). The standard Type ME43 consists of a fieldbus coupler which transmits the internal CANopen-based communication of the Bürkert field devices to

The Type 8644 - AirLINE is a remote process actuation control system The AirLINE System integrates high performance solenoid pilot valves, remote electronic I/O and fieldbus communication into a process actuation and control system that is both compact and extremely flexible. Its modular design allows fully customised, pre-mounted and tested

What are signal conditioners? With the variety of process control systems available, it is often necessary to convert an input signal into a format that the system will accept. Signal conditioners take signals from an assortment of field instruments such as thermocouples and RTDs, and convert those signals into any of several standard instrument

The TOCSIN 920 is a touch-screen gas detection system with flexible control, allowing versatile system design. The TOCSIN 920 allows up to 250 addressable gas detectors to be controlled. The controller is designed to work directly with addressable highways and can integrate eight highways as a standard

The Spyder is a touch-screen display which can be used in conjunction with our Protoc TOC and Proam ammonia analyers to graphically display concentration and to data record. The touch screen also provides visualisation of the instrument status depicting when the instrument is off-line during the automatic calibration and automatic cleaning

The Bran Sands influent monitoring kiosk was supplied to Northumbrian Water in April 2007, and was sized to accommodate four ProAm ammonia monitors, which allowed space for additional instruments. All of the sample distribution was preformed using stainless pipework. Fused spurs were attached to each analyser and signals were wired to a common