Fixed gas detection

Promet EExd is a process moisture analyser for critical process gas applications. It offers single and dual channel moisture measurement, with integrated electronic pressure reading, within a single field-installed flameproof housing. User interface is provided through the bright vacuum fluorescent display and touch screen controls. Promet EExd is

The EC91 intrinsically safe oxygen analyser is designed for measurement of gas streams in hazardous area installations. It is ATEX approved for EEx ia IIC T4 Zone 0 and can be used in most industrial gases and atmospheres. The instrument requires no periodic maintenance, such as replacement of electrodes or electrolyte, and is easily calibrated

The ZR800 oxygen analysers are designed for the rapid and accurate measurement of oxygen from low ppm levels to 100% in nearly all industrial gases and atmospheres. They incorporate a unique miniature zirconia ceramic oxygen sensor, which provides high accuracy, fast response, and a wide measuring range. This sensor is non-depleting and requires

MM500 moisture analysers provide absolute moisure measurement with accurate dependable results over a wide range. Designed to be customised to your application giving precise measurements using a phosphorus pentoxide (P2O5) moisture sensor. They are designed for use in process gas, heat-treating furnace, air dryer, chemical manufacturing

The updated TOCSIN 102 PhotoIonisation Gas Detector is used for the detection of VOC’s. It provides dynamic first response to gases and vapours and can be configured for one of over 400 substances. Photo-Ionisation detectors offer many advantages for VOC detection over other available technologies. They are able to measure Parts Per Billion (ppb

IGD 2-wire addressable gas detection systems use a 2-core cable to connect multiple addressable detectors, samplers, alarms and accessories to a control panel. The system allows a fast installation and requires up to 70% less cabling than a traditional gas detection system. Gas detection components can be distributed and retrofitted intelligently

MM300 is ideal when simple, accurate moisture measurement is required. Designed with the OEM user in mind, the MM300 transducer and monitor can be easily integrated into a wide range of systems. This two-wire loop powered dew point transmitter is designed for moisture measurement in gases. It is suitable for applications in the petrochemical

The XZR-500 oxygen sensor is designed to determine the excess of air required for optimum combustion. It uses zirconium oxide technology to measure levels of oxygen in harsh conditions such as boilers, incinerators and furnaces. Together with the XCU-500 analyser, it provides fast, accurate readings taken in the harshest conditions: reliable and

TOC-30 Series Safe Area Gas Detectors are available in legacy 4-20mA format or a modern addressable format. The detectors are produced in a rugged modern ABS housing. Sealing is moulded as part of the housing with the electronics and the detector placed in seperate compartments. The detector itself is protected by a unique labyrinth design

The CA56 Cylinder Analysis System is capable of quickly and easily measuring trace gas impurities such as oxygen, moisture or other trace impurities. This is essential for inert gas manufacturers who require every gas cylinder to be checked for impurities before delivery to their customers. The issue with using trace oxygen and moisture analysers

The Genesis WDG Series from Land introduced the world's first fully integrated, stand-alone flue gas oxygen analysers. The Genesis 1200 WDG and the Genesis 1210 WDG are rugged and reliable for net oxygen, and use industry-proven zirconium oxide sensor technology. The outer probe tube is made from 310 stainless steel, so no abrasion shield is

The MM400 moisture analysers offer advanced technologies in process gas measurement for maintenance-free analysis. Utilising an aluminium oxide ceramic sensor for moisture detection in the range -100 to +20 degrees dewpoint, or from trace levels to ambient air conditions. They are designed for precise moisture analysis in plastics manufacturing

The EC900 range of process oxygen analysers are accurate, reliable and flexible under the most demanding on-line operating conditions. It uses a variety of specially engineered electrochemical fuel cells to monitor oxygen within most industrial gases and atmospheres. Long life, maintenance-free, disposable oxygen sensors. Ambient air or traceable

The TOCSIN 640 Addressable Control Panel with Detector is a variant of the TOCSIN 640 Detector Control Panel that is pre-fitted with a detector and mains lead. It is available for CO2, oxygen and N2O detection. Applications include small surgeries, for oxygen depletion monitoring; horticulture or brewery CO2 detection applications; background N2O monitioring

The Easidew transmitter is a 2-wire dew point transmitter. Fully configured and calibrated, it can be instantly incorporated into an air or gas management and control system: 2-wire loop powered connection; dew point or ppm moisture content; IP66 (NEMA 4); excellent sensor protection; measurement range -100 to +20°C; operating temperature -40 to

The 2-wire addressable gas detection room status indicator gives live readings of up to 8 detectors / devices in specified rooms, to provide accurate measurement of the background atmosphere for a specific hazardous target gas. The system incorporates clear visual and audible alarms for any hazard to provide unambiguous alarm indication

End of line filtration is importation to ensure dirt, debris or liquids do not enter the gas lines where such material will cause blockages and be difficult to remove. the standard EOL(End of Line) Filter comprises a wall mounting high efficiency disposable filter. The filter is housed inside a stainless steel protection cover with a viewing

The 9500 oxygen and nitrogen control system monitors and adjusts atmospheres in soldering machines and heat treatment furnaces, saving nitrogen, cutting costs and improving process control: save on Nitrogen usage and rework costs; improve process control and product quality; automatically detects a halt in production and reduces N2 flow for even

The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion processes. Easy to install and operate, the FGA also calculates values for combustion efficiency, NOx and carbon dioxide. This

Carbon monoxide sensors from Titan Products are designed for applications that require measurement and monitoring of Carbon Monoxide (CO). The sensors can be used to control ventilation rates within extract systems for applications such as car parks, loading bays, incinerators and boiler rooms. The CO sensor employs solid state temperature

The TOCSIN 102 Infrared Gas Detector is a provides high-reliability gas detection in a small-format ATEX-rated package. Dual beam technology with dual detectors are used for the sample and reference channels. Temperature compensation and linearity correction are built in giving a fully linearised output. They are supplied pre-calibrated for the

The PM700 paramagnetic analysers are designed for reliable, repeatable, accurate oxygen purity measurements with full percent range capability. Utilising the well proven magneto-dynamic transducer these analysers offer high performance oxygen analysis. Whatever your measuring range the PM700 range have an analyser to suit your requirement

TOCSIN 102 ATEX certified gas detectors provide gas sensing capabilities for hazardous areas. It is capable of detecting flammable gases, oxygen and a wide range of toxic gases. Applications Typical applications include: offshore platforms, refineries, petrochemical processing, process plant, ventilation, fuel distribution, gas storage, fuel