Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Toxic gas detectors
Toxic gas detectors - helping you find the best solution for your project.
IGD 2-wire addressable gas detection systems use a 2-core cable to connect multiple addressable detectors, samplers, alarms and accessories to a control panel. The system allows a fast installation and requires up to 70% less cabling than a traditional gas detection system. Gas detection components can be distributed and retrofitted intelligently- PRODUCT
- International Gas Detectors
End of line filtration is importation to ensure dirt, debris or liquids do not enter the gas lines where such material will cause blockages and be difficult to remove. the standard EOL(End of Line) Filter comprises a wall mounting high efficiency disposable filter. The filter is housed inside a stainless steel protection cover with a viewing- PRODUCT
- International Gas Detectors
TOC-30 Series Safe Area Gas Detectors are available in legacy 4-20mA format or a modern addressable format. The detectors are produced in a rugged modern ABS housing. Sealing is moulded as part of the housing with the electronics and the detector placed in seperate compartments. The detector itself is protected by a unique labyrinth design- PRODUCT
- International Gas Detectors
The Testo 350 portable flue gas analyser is the ideal tool for professional flue gas analysis and measures up to six different parameters such as O2, CO, COlow, NO, NOlow, NO2, SO2, CO2, CxHy and H2S. Helpful instrument settings guide you safely through typical measurement tasks such as: Flue gas analysis in Commissioning, setting, optimisation or
The Testo 330-2 LL flue gas analyser is the perfect, portable, easy-to-use flue gas analyser for a wide variety of uses and applications. Our comprehensive, advanced analyser for the domestic and commercial Heating Engineer come equipped with the following: high-resolution colour display for the graphic representation of your measurement data
TOCSIN 102 series gas detectors provide gas sensing capabilities for hazardous areas. It is capable of detecting flammable gases, oxygen and a wide range of toxic gases. Typical applications include: offshore platforms, refineries, petrochemical processing, process plant, ventilation, fuel distribution, gas storage, fuel storage, garage- PRODUCT
- International Gas Detectors
The MultiRAE 2 is a new wireless portable chemical detector. In addition to its PID sensor for volatile organic compounds (VOCs), the MultiRAE 2 supports over 30 electrochemical, NDIR, and catalytic sensors to detect up to five additional threats, including toxic and combustible gases, oxygen deficiency / enrichment and carbon dioxide. The- PRODUCT
- Shawcity
The TOCSIN 103 gas detector is used in industrial and commercial applications in normal non-hazardous area environments. The TOCSIN 103 is capable of detecting flammable gases, oxygen and a wide range of toxic gases. It is available as an analogue or addressable device to complement the IGD range of control equipment. Addressable interconnection- PRODUCT
- International Gas Detectors
With the capability to measure up to 6 gases in one compact personal portable monitor the PHD6 gives unrivalled protection. There are 18 different sensor options making it the most configurable gas detector on the market. A mixture of sensor technology can be accommodated. A Photo-ionisation Detector (MiniPID) is available for VOC measurement
The Testo 340's compact design combined with reliable engineering makes it the ideal analyser for commissioning, service and maintenance work as well as measurements for monitoring purposes. More reliability, more convenience and even more parameters. The Testo 340 is equipped with an O2 sensor as standard. Three additional sensors such as CO
Toxic gas detectors - helping you find the best companies for your project.
A1-CBISS
Manufactures turnkey analytical systems for gas monitoring of stacks, chemical processes, effluent outfalls and ambient air. A multi-gas / multi-channel analysing system can monitor up to six gas concentrations from eight different locations. Applications include leak detection in storage tanks and toxic gas alarm systems in the brewing, building
5 Valiant Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HSABLE Instruments & Controls
Manufactures a portable mercury vapour analyser utilising patented gold film sensor technology for high accuracy measurement over a range of 0.001 to 0.999mg/m3. Applications include waste and landfill sites, environmental surveys and pollution incidents. Also offers portable and permanent units capable of measuring low PPB levels of hydrogen
Cutbush Park, Danehill, Lower Earley, Reading, RG6 4UTAllison Engineering
Portable laser-based gas detectors incorporate a fibre-optic port for different measurement heads. These heads enable stack monitoring, short and long open path monitoring, and local point measurements. Mass flow transmitters are also available. They have single- or multipoint probes, and are suitable for small bore pipes up to large ducts
Unit 5, Cranes Close, Basildon, SS14 3JBAMETEK Land
Designs and manufactures flue gas combustion efficiency and environmental emissions monitoring instrumentation. A range of analysers provides both portable and continuous monitoring of CO, O2, CO2, NO, NO2, NOx, SO2, H2S, CxHy, smoke, dust, acid dewpoint temperature and turbine blade temperature. Special analysers can be designed to meet specific
Stubley Lane, Dronfield, S18 1DJAnalox
Manufactures portable and fixed gas monitors and sensors for specialist applications. Includes personal single gas monitors, with datalogging facilities for oxygen and toxic gases, which have 3 alarm levels (time weighted average, short term exposure limit, peak level); a portable multi-gas monitor with 1 oxygen, 1 combustible and 2 flammable gas
15 Ellerbeck Court, Stokesley Industrial Park, Stokesley, Middlesbrough, TS9 5PTAndel
Offers a leak detection system which is installed in sensitive and critical areas to give an early warning of leakage from any source, including pipes, tanks and air conditioning plants. The system uses lengths of water sensing detection cable or point sensors which are connected individually, or in groups, to multizone control panels or to
New Mills, Brougham Road, Marsden, Huddersfield, HD7 6AZAnglo Nordic
Manufactures fixed, individual and multichannel gas leak detectors systems, in addition to hand-held units for service engineers in the heating and air conditioning industries. Hand-held units are suitable for use on LPG and natural gas / methane, and are complete with built-in suction pumps, rapid response sensors and in-car chargers. Fixed units
12/14 Island Farm Avenue, West Molesey, KT8 2UZAshtead Technology
Rental of gas analysis equipment ranging from indoor and ambient air instruments to continuous emissions systems. Lightweight toxic gas monitors for carbon monoxide or hydrogen sulphide protection feature audible and visual alarms, and an easy-to-read top-mounted display. Airborne toxic mercury vapour monitors are also available for spill response
Ashtead House, Discovery Drive, Westhill, AB32 6FGATP Instrumentation
Supplies a range of gas detection equipment and alarms. Offers ATEX-approved personal gas detectors. Robust and fully weather protected, the detectors have a shockproof internal construction and use self-checking software to assure reliable gas detection in arduous environments. They cover flammable gases, hydrogen sulphide, carbon monoxide and
Tournament Way, Ivanhoe Industrial Estate, Ashby-de-la-Zouch, LE65 2UUCastle Group
Monitoring gases in the workplace has become a lot easier in recent years with the development of multii-gas monitors. Our personal gas monitors are small, easy to use and can work in tough environments. Every gas monitor comes with a range of options to enable you to measure the right gases, with either single gas monitors or measuring up to 5
Salter Road, Scarborough Business Park, Scarborough, YO11 3UZCity Technology
Manufacturer of electrochemical, catalytic bead and infrared gas sensors. Miniature models for monitoring toxic and combustible gases and oxygen levels are designed for use in portable safety instruments where space and power consumption is limited. The sensors small size enables several gas types to be housed in the same instrument for multi-gas
City Technology Centre, Walton Road, Portsmouth, PO6 1SZClipperTech
Supplies instruments for the measurement of gas and steam, encompassing such parameters as pressure, humidity, temperature and flow. Unlike other personal protection monitors, products offer the ability to monitor five gases simultaneously, including low levels (ppb) of volatile organic compounds. This is especially suitable for confined space and
Station House, 4 Station Road, Oakley, KY12 9QFCrowcon Detection Instruments
2–6 Blacklands Way, Abingdon Business Park, Abingdon, OX14 1DYDetector Electronics
Manufactures gas detection equipment for industrial environments. Sensors, transmitters and controllers are available to detect combustible gases, toxic H2S, O2 deficiency or enrichment, CO and Cl2. Also available are UV and IR flame detectors and smoke detectors
Mathisen Way, Colnbrook, Slough, SL3 0HB
