Chemicals / parameters Conductivity
Other
pH
Suitability Food / drink
Potable water
Process liquids
Type Fixed
System type Sensors
Features Waterproof
 
 
 

The Type 8285 is a modular analysis system that can be used to measure the pH, ORP and conductivity of process liquids. It can be fitted and remain permanently in-process, even during CIP and SIP purification.

The Type 8285s avoids contamination and cuts process time and cost by removing the need for sensor removal, cleaning and recalibration.

 

Applications

The version with a hygienic, polished stainless steel enclosure can be used in biotechnology, food processing and pharmaceuticals. Further applications in the chemical industry, environmental engineering, water and wastewater treatment, and for application in power plants are also possible.

During cleaning operations, even CIP and SIP purification, the Type 8285 sensor remains in situ and does not require recalibration. This saves time and cost, and ensures the sterility of the end product when changing batches.

Features

The base unit contains the power supply, signal outputs, binary inputs and the front with graphic display with backlighting.

Three slots are available, which depending on the applications can be occupied with modules for pH, conductivity or also with a module with additional outputs.

  • High flexibility provided by modular concept for several measuring parameters
  • Outstanding features for highly demanding applications
  • Simple and intuitive user interface supported by a large high-resolution graphic display

Operation

The enamel sensors do not have to be removed or recalibrated, meaning that processes are not opened up to the risks of germs or contamination. This feature contrasts with conventional pH sensors that have electrodes that cannot be used in the extreme CIP environment.

Conventional pH sensors are usually removed using special automated armatures and are cleaned separately with chemicals, before being recalibrated, if necessary.

Type 8285 sensors have to be recalibrated only once or twice a year, and maintenance is limited to the approximately annual exchange of the electrolyte supply bottle, which is integrated into the enamel pH electrode and acts as a reservoir for the reference electrode.


The Type 8285 is a modular analysis system that can be used to measure the pH, ORP and conductivity of process liquids. It can be fitted and remain permanently in-process, even during CIP and SIP purification.

The Type 8285s avoids contamination and cuts process time and cost by removing the need for sensor removal, cleaning and recalibration.

 

Applications

The version with a hygienic, polished stainless steel enclosure can be used in biotechnology, food processing and pharmaceuticals. Further applications in the chemical industry, environmental engineering, water and wastewater treatment, and for application in power plants are also possible.

During cleaning operations, even CIP and SIP purification, the Type 8285 sensor remains in situ and does not require recalibration. This saves time and cost, and ensures the sterility of the end product when changing batches.

Features

The base unit contains the power supply, signal outputs, binary inputs and the front with graphic display with backlighting.

Three slots are available, which depending on the applications can be occupied with modules for pH, conductivity or also with a module with additional outputs.

  • High flexibility provided by modular concept for several measuring parameters
  • Outstanding features for highly demanding applications
  • Simple and intuitive user interface supported by a large high-resolution graphic display

Operation

The enamel sensors do not have to be removed or recalibrated, meaning that processes are not opened up to the risks of germs or contamination. This feature contrasts with conventional pH sensors that have electrodes that cannot be used in the extreme CIP environment.

Conventional pH sensors are usually removed using special automated armatures and are cleaned separately with chemicals, before being recalibrated, if necessary.

Type 8285 sensors have to be recalibrated only once or twice a year, and maintenance is limited to the approximately annual exchange of the electrolyte supply bottle, which is integrated into the enamel pH electrode and acts as a reservoir for the reference electrode.


Interested in this product?
Call 01285 648720
OR
 
 
 
Downloads
  • Measurement devices product range overview
    Measurement devices product range overview
    70pp 8.87MB
    Download
 
 
 
Enquire
 


Related entries

  • Bürkert Fluid Control Systems: Type 8619 multiCELL transmitter / controller
    Type 8619 multiCELL transmitter / controller
    Bürkert Fluid Control Systems
    The Type 8619 multiCELL transmitter / controller is a modular system for controlling water treatment processes within cooling tower systems. The multiCELL is fully compatible with Bürkert's range of sensors, control valves...
  • Bürkert Fluid Control Systems: Boost in efficiency for chemical distribution company
    Boost in efficiency for chemical distribution company
    Bürkert Fluid Control Systems
    When Brenntag, a global market leader in chemical distribution needed to replace its effluent monitoring and batch control systems, it turned to Bürkert for a complete solution. The end of life equipment was in need of...

Also by Bürkert Fluid Control Systems

Bürkert Fluid Control Systems address and contact details

Bürkert Fluid Control Systems
Fluid Control Centre
1 Bridge End
Cirencester
GL7 1QY
Tel: 01285 648720
Fax: 01285 648721
View on map
 
Follow Bürkert Fluid Control Systems
 
Not found what you're looking for? View other options

Ask Bürkert Fluid Control Systems about

Type 8285 analytical transmitter