Pipework accessories

UDP-24 point-of-use water detector comprises two components: a detector module and a point detector connected together via a 1m jumper cable. It needs a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc. The Detector Module houses electronic circuitry; the Point Detector

The UDF-24 ‘Universal’ Float Detector requires a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: does not require an i-Zone control panel; for use within Sumps, Plant rooms, & water tanks; can be set to alarm on the rise or fall of water; manufactured from rust proof

ABS System from Georg Fischer Piping Systems is a cemented piping solution made from ABS plastic, designed for industrial applications in temperatures from 60°C to -50°C, with low thermal conductivity and high impact strength at low temperatures: cemented ABS piping system for low-temperature industrial use; suitable for temperatures from 60°C to

The ELGEF Plus Y-tapping saddle range features the patented Y-shape design, expandable belt, drillable heating element and ELGEF Plus electrofusion technology. The innovative Y-shaped design with optimised flow characteristics and reduced pressure losses helps reduce operational cost of the network. With an overall low installation height, there

The RAC50 axial camera is the smallest camera model built for use in narrow pipe systems. It is designed for use on RX95 and the RX130 crawlers. With a CMOS colour camera, powerful LED lighting and a stainless-steel compact design, the iPEK RAC50 is used to inspect narrow, hard-to-reach areas

The STDi-24 point of use conductive water detector is designed for use in plant rooms and other solid floor areas. It has two components - the detector module and the point detector - connected by a 1m jumper cable. Conductive fluid touching the two detection pins simultaneously will cause the detector to enter an alarm condition. Alarm status and monitoring is via a network

The MULTI/JOINT® 3000 Plus system makes gas or water pipe networks quick, safe and simple to connect without the need for special tools. Thanks to the system's flexibility, meeting the specifications of a wide variety of materials or outside diameters of pipelines is no longer a challenge. Connections or repairs are carried out by means of a

The Sunaero 101 is a portable hydrogen tracer gas detector designed for use in hazardous environments, with ATEX Div. 1 or Zone 0 approval (Ex ia, IIC T4). It uses the hydrogen method for leak detection, allowing it to identify the smallest leaks, down to the size of bacteria. Key Features: safe: The Trace 101 is designed to operate safely in

The Aqualarm IRDi-485 point-of-use oil detector comprises two components: the detector module and the point-of-use detector, connected via a 1m jumper cable. Both are manufactured from STAREX General ABS (SD-0150) plastic. The detector module houses the electronic circuitry; the point-of-use detector houses the infrared transmitter / receiver

ELGEF Plus is a modular polyethylene (PE) piping system from GF Piping Systems, designed for water and gas networks. Made from PE100, the range includes couplers, saddles, and fittings, with leak-tight, maintenance-free connections and a typical lifespan of up to 100 years: modular PE piping system for water and gas networks; made from PE100 for

The iZ-T25 i-Zone touch screen control panel can simultaneously monitor all 25 Aqualarm detectors, including water, oils, chemicals, refrigerant gas leak detectors, and temperature and humidity detectors. Two pulsed flowmeters for incoming mains water can also be monitored, with the facility to control a solenoid valve. By connecting the control

The STDi-485 Point of Use water Detector is comprised of TWO components, the detector module and the point detector, connected together via a 1m jumper cable. Both the Detector Module and the Point detector are manufactured from STAREX General ABS (SD-0150) plastic. The Detector Module houses the electronic circuitry and the Point Detector houses

The IRDi-24 point of use oil detector is made up of two components: the detector module and the point of use detector, connected together via a 1m jumper cable. Both the detector module and point of use detector are manufactured from STAREX General ABS (SD-0150) plastic. The detector module houses the electronic circuitry and the point of use

The UDC-24 ‘Universal’ Zone Detector Module requires a 24-volt power source and, in the event of an alarm, a volt-free contact is triggered, giving an alarm signal back to a BMS. Does not require an i-Zone control panel; zone detector module for connection to detecting cable; manufactured from rust-proof and hard-wearing ABS plastic; LED and

UDOF-24 ‘Universal’ Overflow Detector is used to detect water in an overflow pipe. It requires a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS

The QL320 is a quantitative optical gas imaging (QOGI) system that allows surveyors to measure the leak rates for methane and other hydrocarbons with immediate results, eliminating the need for secondary sampling. QL320 does not require close contact with the gas in order to measure emission rates, making it a safer solution for quantifying

FLIR Si124 is an easy-to-use, stand-alone system for locating pressurised leaks in compressed air systems. Lightweight, one-handed solution is designed to help maintenance, manufacturing, and engineering professionals identify leaks up to 10 times faster than with traditional methods. Built with 124 microphones, the Si124 produces a precise

FLIR G343, a member of the G-Series, is an innovative Optical Gas Imaging (OGI) camera used to visualise possible carbon dioxide (CO2) gas leaks. Whether or not CO2 is a byproduct of a production process or used as a trace gas, the G343 provides fast accurate detection to ensure safety. Advanced cooled 320 × 240 (76,800 pixels) resolution camera

PRIMOFIT is a range of malleable cast iron pipe fittings for connecting smooth-ended steel and PE pipes. Offered in black and hot dip galvanised versions, and in dimensions ranging from 3/8 to 3 inches, these fittings are durable and resistant to high mechanical stress and temperatures. Various sealing materials can be used, which enable pressure-proof

The GF343 is an optical gas imaging camera designed to detect CO2 leaks quickly, easily, and from a safe distance. Typical applications include detection of CO2 as a byproduct of a production process, as a trace gas used to detect leaks from power generators, or as part of an Enhanced Oil Recovery program. Visually detects CO2 gas leaks in real

The Stress Less® pipe support system protects piping from mechanical stress during thermal expansion cycles and extends the life of a piping system. It consists of a uniquely designed plastic insert enclosed within a metal hoop allowing a plastic pipe to slide freely during each thermal expansion cycle and preventing mechanical stress. The metal

Prochem's pulsation dampers are specifically designed to meet the needs of dosing pump manufacturers, dosing system builders and end users. They provide a simple, inexpensive and reliable means of stabilising flows and pressures in dosing systems and reducing pipework vibrations: stabilises flows and pressures in dosing systems; reduces pipework

The FLIR GF77 is an uncooled infrared gas leak detection camera for visualising methane and other gas emissions in realtime. Camera features spectral filtering for methane and similar gases: oil and gas facilities; gas transportation terminals; power generation plants. maintain valuable capital equipment and avoid product loss; meet emissions

FLIR G304 is an innovative optical gas imaging (OGI) camera used to detect possible hydrofluorocarbon, refrigerant and other industrial gas leaks. Designed with safety and efficiency in mind G304 can detect dangerous and environmentally harmful gases from safe distances. Capable of reducing inspection time by scanning large areas without