Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Process controllers
(77)
Process controllers for industrial process automation, monitoring and regulation. Single-loop and multi-loop PID control for temperature, pressure, flow and level. Panel-mounted, DIN-rail and field units with setpoint programming, alarms, data logging and communications. Integration with PLC, SCADA and DCS.
Process controllers - helping you find the best solution for your project.
AERZEN Webview system optimisation process monitoring
AERZEN WebView is a browser-based monitoring system for AERZEN process air packages, designed to enable remote access to operating and service data without extra software. Allows real-time data retrieval, fault notifications, and maintenance planning from any location using standard internet browsers: remote monitoring system for process air
GEMÜ 1441 cPos-X - intelligent electro-pneumatic positioner
With a smart app operating system, the GEMÜ 1441 cPos-X is an intelligent, digital electro-pneumatic positioner in two-wire technology used to control pneumatically-operated process valves. The two-wire technology offers advantages when it comes to simplified wiring. The field device’s power is supplied via signal source and requires no further
AERsmart - intelligent control systems for AERZEN blowers
AERsmart distributes air flows optimally between blower, hybrid and turbo technologies and their individual efficiency levels. End result: standalone efficiency levels close to the theoretical maximum. Additional savings of up to 15%. Integration of third-party manufacturers. Strong fluctuations in load operations are typical for biological waste
AERtronic - unit control systems for blowers and compressors
AERtronic is a digital control system by AERZEN for managing compressed air production, designed to improve transparency, safety and efficiency in plant operations. All process data is collected, evaluated, and can be integrated with production control systems. Available in Basic, Advanced and Premium versions, it supports modular expansion and- PRODUCT
AERZEN Machines Ltd
Huber Unistat sealed liquid thermoregulation
The Huber Unistat is manufactured in stainless steel and offers hydraulically-sealed liquid thermoregulation from -200°C to 400°C. It provides reduced volumes of heat transfer fluid (HTF) as well as high flow rates. The improved heat transfer results in quick and precise temperature control in reaction vessels and other closed systems. There is no
Type 3730-6 Electropneumatic Positioner (HART®)
The integration of control valves into the DCS technology determines the accuracy of the control loop and is decisive for the cost and quality of the final product. This integration is a prerequisite for effective preventative maintenance of control valves and also adds to the availability of the system
Type 3755 Pneumatic Volume Booster
The integration of control valves into the DCS technology determines the accuracy of the control loop and impacts on the cost and quality of the final product. This integration is a prerequisite for effective preventative maintenance of control valves. It also adds to the availability of the system. The pneumatic volume booster is mounted between
Temperature Controllers - compact relay process temperature controller
A temperature controller fulfils simple or even relatively complex control tasks. Various types of sensors can be connected to a temperature controller. Therefore, a temperature controller offers the possibility to process signals from resistance sensors or thermocouples. A temperature controller is available as a 2-point, 3-point or continuous
Type 8652 AirLINE valve island is optimised for process automation. Diagnostics are displayed on the LC display in clear text and symbols helping save time during start-up and maintenance. The diagnostic message is also available in the PLC for a fast overview of the plant status. The hardware is optimised for installation at the bottom of the- PRODUCT
- Bürkert Fluid Control Systems
Type 8695 positioners combine simply and reliably with the Type 21xx process valve actuators, and are specially designed for hygienic process environments. They meet the demands of plant washdown environments thanks to their compact design, materials used, external seals, and integrated control air supply to the actuator: contact-free inductive- PRODUCT
- Bürkert Fluid Control Systems
Time-pressure dosing is a widely used method for the reliable dosing of liquids across numerous fields of application. However, if dosing quantities are very small and the pressure differences between dosing cycles are minimal, closed-loop control becomes a challenge. The pressure regulator Type 8763 from Bürkert has been specially developed for- PRODUCT
- Bürkert Fluid Control Systems
Type 8692 positioners combine simply and reliably with Type 23xx/2103 process valve actuators, and are specially designed for the requirements of hygienic process environments, such as in food, beverage and pharmaceutical industries: compact, robust stainless steel design; easy start-up by automatic X-Tune function; contact-free position sensor- PRODUCT
- Bürkert Fluid Control Systems
Type 8713 is a compact instrument designed for the control of the mass flow of gases that can be used for most applications in process technology. It uses CMOSens® technology to accurately measure the gas flow rate allowing it to control a set point or actual value changes within 100ms and also maintain its high sensitivity, even at low flow- PRODUCT
- Bürkert Fluid Control Systems
Bürkert Fluid Control Systems provides modular, customisable process control platforms for the regulation of temperature within industrial heating and cooling processes. All types of thermal transfer media can be measured and controlled, including air, water, oil or a combination of these media- PRODUCT
- Bürkert Fluid Control Systems
The valve island Type 8653 AirLINE Field has been especially developed for the requirements of process automation. New diagnostic functions can be visualised at the LC display, both in clear text as well as symbols. This makes it easy to relate to the shown messages and helps to save time during start-up and maintenance. Diagnostic messages are- PRODUCT
- Bürkert Fluid Control Systems
Type 8691 positioners combine simply and reliably with Type 23xx/2103 process valve actuators, and are specially designed for hygienic process environments. Recent implementation of two additional industrial network interfaces - IO-Link and büS - makes it a universal tool for communications between valves and higher-level automation systems- PRODUCT
- Bürkert Fluid Control Systems
Type 8694 are compact positioners that combine simply and reliably with pneumatically operated Type 23xx/2103 process valves, and are specially designed for hygienic process environments: compact, robust stainless steel design; start-up by automatic Tune function; contact-free position sensor; integrated control air routing; fieldbus interface- PRODUCT
- Bürkert Fluid Control Systems
Type 8696 are compact positioners that integrate simply and reliably with the Type 23xx/2103 pneumatically operated process valves. They are specially designed for hygienic process environments: compact, robust stainless steel design; start-up by automatic Tune function; contact-free position sensor; integrated control air routing; analoge- PRODUCT
- Bürkert Fluid Control Systems
Bürkert Fluid Control Systems, working in partnership with Schwarzer Precision, provides bespoke micro-fluidic equipment from prototypes to full production systems. Every aspect of the pump design can be specified, from materials for the housing and diaphragms to specialist connections and valves. Initial prototypes can be produced within a very- PRODUCT
- Bürkert Fluid Control Systems
Type 8690 positioners combine simply and reliably with Type 23xx/2103 process valve actuators, and are specially designed for hygienic process environments: compact design; integrated pilot valve with manual override; integrated control air routing; visual position indicator; with ATEX II cat. 3G/D and cat. 2D/G approval; close-tight function- PRODUCT
- Bürkert Fluid Control Systems
Modular, electropneumatic automation system consisting of connection modules and valve modules. Fully integrates into the decentralized peripheral system "SIMATIC ET 200SP" from Siemens. Designed for space-saving installation in control cabinets in drinking and process water applications- PRODUCT
- Bürkert Fluid Control Systems
Type 8619 multiCELL is a multi-channel and multi-function transmitter/controller for managing water quality in industrial processes. Type 8619 is used in water treatment plants such as boiler, cooling tower or reverse osmosis systems. Applications include food, beverage and pharma plants. The multiCELL is fully compatible with Bürkert's range of- PRODUCT
- Bürkert Fluid Control Systems
Type 8719 is an instrument for liquid flow control in process technology. Typical applications include liquid dosing in heat treatment, machine tools, fuel cell technology processes: high dynamic control through fast flow measurement; applicable for liquid dosing up to 600 ml/min (36 l/h); no moving parts in medium; protection class IP65; fieldbus- PRODUCT
- Bürkert Fluid Control Systems
Producing high-quality champagne takes time and expertise; ensuring consistent quality requires precision process control and a reliable infrastructure. For CRVC (Coopérative Régionales des Vins de Champagne) the installation of a special disgorging line required expert support, which was delivered through a partnership with Bürkert. As part of a
