Process gas valves

Blackhall bronze filter relief valves Series 2013 incorporate many features that provide advantages to the cryogenic industry. There is total flexibility in the material selection, allowing exact customer specifications to be met. For example, all trim and non-wetted parts are available in stainless steel if required. Various end connections are

The Type 6213 solenoid valve is a compact valve for neutral media up to 100°C. It provides high flow rates with low noise, and operates free from water hammer. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without

The Type 6624 is a direct acting solenoid rocker valve with a patented TwinPower actuator for analytical applications. It is suitable for handling aggressive liquid and gas media and applications where chemical resistance is required. The TwinPower actuator has a unique twin coil. It has enabled the size of the valve to be reduced without any loss

Wide range of pressure ratings, sizes, and resilient materials provide long service life and low internal leakage. Our most economical, high flow valves for liquid, corrosive, and air/inert gas service. Industrial applications include: car wash, air compressors, pumps, laundry equipment, industrial water control

The Type 2101 is a pneumatically operated 2/2 way globe valve that is part of Burkert's modular range of ELEMENT valves, radar level sensors and analytical field transmitters. These products can be combined in an array of configurations to suit specific processes: environmentally aggressive conditions and hygienic areas; inert fluids, steam

The stainless steel filter relief valve Series 2012 is used for applications in the cryogenics industry. All valves are degreased to LOX service as standard and immediately bagged ready for despatch. All valves are issued with test certification and a certificate of conformity. DIN 50049 3.1.B. certification is available on request. It is easy to

The 2300 angle-seat control valve is optimised for tough process environments. It meets EHEDG hygienic engineering guidelines for materials compatibility, have smooth surfaces and external seals, and are resistant to cleaning solutions. It is part of Burkert's range of ELEMENT valves, radar level sensors and analytical field transmitters, which

Series 238 2/2 pilot operated solenoid valves have a brass body (3/8 to 2) and are suitable for use with air, inert gas, water and light oil: compact design saves space, reduces installation time, and simplifies service; short stroke design increases life

The Type 2103 is a pneumatically operated, externally piloted diaphragm valve designed for usage in hygienic or aggressive environments. It is part of Bürkert's modular range of ELEMENT valves and sensors. The valve consists of a pneumatically operated piston actuator, a diaphragm and a 2-way valve housing made of cast stainless steel. The design

Blackhall aluminum bronze globe valves Series 4500 are designed and engineered specifically for marine applications. They have a blow-out-proof spindle made to a one-piece, high-strength design. They have a long-life, low-torque spindle thread, and a lightweight ergonomic aluminium handwheel. A colour-coded handwheel option is available- the

The Type 2031 is a 2/2 way pneumatically operated, pilot controlled diaphragm valve. The diaphragm creates hermetical separation of fluids from the operating mechanism. It provides higher flow than conventional diaphragm valves with bi-directional flow and also ensures zero dead volume in the flow: available in DN 4-100 ratings; actuator from PA

VZWM-L directional control solenoid valves operate with diaphragm technology and differential pressure. They have an armature tube for fitting a solenoid coil of your choice: indirectly controlled poppet valve with diaphragm control; connection, valve G14 ... G2; flow rate 1400 ... 31000 l/min; available in brass or stainless steel casting; varied

VZBA 3-way stainless steel ball valves allow smooth and simple control of aggressive media or gases in piping systems. The valves are ideal wherever processes grow more complex, for example when rinsing two containers at the same time or mixing a combination of essences. Technical features: 3-way ball valve with female thread Ball with L or T

Posiflow solenoid valves are designed to proportionally control the flow of air and inert gases by varying the electrical input signal to the coil Low hysteresis (< 5%), excellent repeatability (< 3%), and high sensitivity (< 2%) make these valves ideal for high precision flow control

The Type 8750 flow rate controller is a system to measure and control gases using the differential pressure principle and offers precision flow control for efficient, accurate pneumatic conveying systems. It combines together a closed loop controller, pressure sensors and a control valve to create an automated air flow control unit that can reduce

The Spring Shut-off Gate Valve Series 2020 is used for applications in the cryogenics industry. It features fully automatic closing, with extremely fast closing times compared with other devices of its kind. It also provides an accurate closure point and repeatability performance. It is easy to install with optional end connections including

Fike has an extensive line of bursting discs. Flexibility of design, a wide range of materials and extensive bursting disc engineering expertise make Fike uniquely capable of building the precise products for your sealing, venting, small space, pressure relief valve protection or other special requirements. Fike begins by gathering as much

The MTV is a control, on/off and shut-off butterfly valve. It is designed to handle a wide range of liquids, gases and steam within a broad temperature range. The MTV valve can be mounted between flanges and is also supplied in lugged design. It has an advanced triple eccentric design, including a unique disc shape that allows the use of a solid

The Fixed Cone Free Discharge valve is typically used for free discharging control at the terminal point of a pipe or culvert at the base of a dam or reservoir stilling basin. The valve was developed to offer the user an economic solution for this type of application. This type of valve has also been called a Howell-Bunger valve, a hollow cone

Bürkerts externally piloted Type 2000 angle-seat valve is used within heat exchange systems in the food and beverage, pharmaceutical and biotechnology industries. It is versatile, and is suited to media including water, alcohol, oils, fuel, hydraulic fluids, salt solution, alkali solutions, organic solvents, steam: excellent sealing integrity

Blackhall cryogenic 3-way diverter valves Series 2005 incorporate many features that provide advantages to the cryogenic industry. The valves are available in bronze or stainless steel, and in Type 24, 60 and 160 CV options. They are made to a modular, lightweight, full bore design. They are fully rated to -196°C for Oxygen service in cryogenics