New entries

The Challenge Approached by a pump hire firm working on the Thames Tideway project, Smart Storm was commissioned to design and build a mobile unit for pH balancing on a transient construction site. The use of acid is restricted as a hazardous substance on the site, so CO2 was the preferred option for balancing the highly alkaline wastewater. The

GEMÜ R481 Victoria is a soft-seated metal butterfly valve with a metal actuator, designed for pneumatic operation in flow control applications. Made from SG iron with epoxy coating, it supports wafer, lug and U-section body types, and suits a wide range of pipe standards and sizes from DN 25 to 600. Suitable for use with various liner and disc

GEMÜ Great Britain helped a leading UK water company overcome persistent valve failures at its Clean Water sites by identifying root causes linked to poor seal design, over-specification and unsuitable materials of construction. By introducing the GEMÜ R480 butterfly valve series, the customer achieved improved reliability, corrosion resistance

Bagnall Environmental was appointed to refurbish two 25m trickling filters at Pirehill Sewage Treatment Works following performance issues caused by incorrect media specification. The company delivered a full strip-out of the existing media, undertook condition assessments, and installed new compliant filter media with upgraded ventilation system

Bagnall Environmental delivered a complex odour control filter refurbishment at a UK waste facility, working in partnership with SUEZ to implement its High-Efficiency Advanced filter (HEAB) system. The works involved phased media removal, structural upgrades and specialist installation of pre-seeded media – carried out in live conditions without

Need Lamerton Wastewater Treatment Works (WwTW) near Tavistock in Devon, serves 590 people and consists of a primary settlement tank, trickling filters and a humus tank. The Environment Agency (EA) tightened the phosphorous discharge consents from X mg/l to X mg/l to aid the prevention of algal growth and subsequent eutrophication of the River

Container-mounted Hiller centrifuges such as Model DP764, DP664 and DP574 Hiller Decapress plants are all available as standard built packaged plants, which means minimal on-site build time. MSE Hiller’s centrifuges have capacities from 20 to 135m3/hr, and can come pre-built into a complete Decasmart dewatering plant with all necessary equipment

Oil-injected single-stage screw compressors for air and neutral gases, designed for high energy efficiency with a permanent magnet motor and integrated variable frequency drive. Volume flow ranges from 17 to 726m³/h, with differential pressure from 5,500 to 13,000 mbar. Compact design with low noise and reduced maintenance needs

DS Series double-stage screw compressors deliver oil-free compressed air or neutral gases, meeting ISO 8573-1 Class 0 standards. Designed for differential pressures from 5.5 to 10.5 bar and volume flows between 180 and 2920m³/h, these compact, plug-and-play units suit sensitive and demanding industrial applications

To hire aerators and mixers to deal with unexpected summer demand and for on-site refurbishments at wastewater and effluent treatment plants, contact Peter Wood – [email protected] 07939096048

MSE Hiller Complete Dewatering Plants are turnkey sludge dewatering systems designed for industrial and municipal applications. Systems include macerators, feed pumps, pipework, conveyors, polymer dosing, process automation, electrical wiring, enclosures, and remote monitoring, meeting current Health and Safety and CDM standards: turnkey sludge

MSE Hiller Mobile Rental Units are modern mobile sludge dewatering systems designed for temporary or long-term use at sewage works and industrial sites. Units are made for rapid installation, require no washwater during operation, and can be supplied with operators or staff training. Systems are available in a range of capacities and include

Housebuilding project in Durham, England is located on a hilly incline, specifically a 1 in 10 slope. Surface water run-off was travelling from the top of the hill, eroding the soil and collecting suspended solids on it's way to the bottom of the site. The water was being collected in bunds, and then treated and discharged to a nearby Northumbrian

When Cranswick Country Foods Fresh Poultry were looking for a new centrifuge to increase sludge capacity and processing efficiency on the waste water treatment plant, they turned to the Hiller model DP45-422VAHYAC centrifuge from MSE Hiller. The challenge Cranswick’s old centrifuge system had become mechanically unreliable, difficult to maintain

Built into a complete package skid system for simple and quick installation, our Hyprolyser® iSEC® Modular Skid systems generate sodium hypochlorite at rates of 30, 60 and 90 g/h. These unique electrochlorination systems are provided pre-built tested including softener, salt saturator and chlorine product storage tank