Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Conductivity measurement
(94)
Conductivity measurement on Enviropro. Helping you find the best solution for your project.
Conductivity measurement - helping you find the best solution for your project.
USM small, powerful, cost-effective water quality meter
Powerful, versatile and very cost-effective USM water quality meter that measures a wide range of environmental parameters. As standard, the USM will measure one of a number of ISE (Ion Selective Electrodes), plus an additional optional Modbus Electrode, so the user can measure two parameters at the same time
Liquiline CM14 - compact panel transmitter for water and food industries
Basic transmitter offering everything needed to run a standard measuring point. It fits in the common cabinet cut-outs and is easy to commission thanks to Memosens digital technology. The Memosens hot plug and play concept allows you to quickly install and configure your digital pH/ORP, conductivity or dissolved oxygen sensors. Liquiline CM14 is
USI - flow, level and water quality measurement instrument
The USI is designed to input several parameters on a single, easy-to-programme instrument – meaning the user saves on both purchasing and operating costs. Several standard instruments can therefore be replaced by a single USI in a wide range of clean water and wastewater applications. Whilst giving highly accurate and reliable monitoring, the USI
Memosens - digital sensor for measuring pH, conductivity, chlorine
Reliable and verifiable digital sensor for measuring pH, conductivity, chlorine and dissolved oxygen. Data can be saved directly in the sensor, guaranteeing interference-free measuring signals, whilst simplifying process measuring technology. Memosens eliminates the problems of moisture ingress, leakages and corrosion. Its inductive, plug-in
Liquid discharge monitors
Hydroklear has developed a number of packages for the continual or intermittent monitoring of liquids, whether for quality or other parameters. Water quality measurement parameters include - but are not limited to: pH; conductivity; colour; suspended solids; metals. Hydroklear can provide discharge monitors for surface water treatment systems
Smartec CLD18 - hygienic toroidal conductivity sensor for beverage plants
Smartec CLD18 is a compact toroidal conductivity measuring system designed for hygienic applications in beverage plants, enabling reliable control and monitoring of CIP processes and product flows in small-diameter tubes. The device combines a transmitter and sensor in a contamination-resistant, easy-to-integrate design, supporting optional
Smartec S CLD134 - toroidal conductivity measuring system
Toroidal conductivity measuring system for hygienic and sterile applications in the food, beverage and life sciences sectors. Made from food-grade virgin PEEK with a jointless, crevice-free body, it supports cleaning and sterilisation processes and meets strict hygiene standards. Inductive measurement avoids interference
PCE-228M food pH meter
The PCE-228 food pH meter is an easy-to-use handheld device for measuring pH, mV and °C. Readings can then be directly stored onto a memory card or transferred to a computer. The device can determine pH value, temperature or Redox potency (ORP). For the latter measurement parameter, a Redox electrode has to be ordered separately from the PCE-228- PRODUCT
PCE Instruments UK Ltd
- PPM can provide pre-fabricated instrument panels for intake protection measurement applications. There are a number of standard pre-fabricated water panels covering the dedicated measurement of pH, ORP, conductivity, turbidity, free chlorine and temperature. Whilst the instrumentation can be supplied loose, the advantage of pre-fabrication is that
- PRODUCT
- Pollution & Process Monitoring (PPM)
- Digital 4-channel display and control unit (with integrated solenoid valve for pneumatic control). TriBox3 is a measurement and control system for all TriOS sensors. The device provides 4 sensor channels with selectable RS-232 or RS-485 function. In addition to Modbus-RTU, various other protocols are available. A built-in valve allows compressed
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The IQ Sensor Net system is a fixed monitoring system ideally suited for water and waste-water monitoring applications. Various sensors are available and connect using a common water proof connector. The instrumentation is weather protected to IP66 clasification allowing external mounting. The design also accommodates panel mounting. Data is
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The S411 DIG Digital Conductvity Sensor connects to the Chemitec 50 Series digital controller - 1 or 8 sensor connection - which provides local display, freely programmable analogue and digital change over contacts. Other parameters include DO,pH, Redox, Turbidity & Suspended solids: LCD Graphic display with background illumination; internal
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The Q45CT toroidal conductivity monitor is designed to give reliable online monitoring of aggressive chemical processes, water applications that would coat or foul traditional sensors and plating bath operations with high current densities. The sensor is comprised of two metallic ribbon coils that are fixed in place by the sensor jacket material
- The IQ Sensor Net system has been installed within a wall-mount, frost protected enclosure providing frost protection and flow cell measurement. The flow cell design may accomodate any IQ digital sensor covering a wide range of water quality parameters. The system has been installed to monitor processes where chemical precipitation affects
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The IQ Sensor Net system is a fixed monitoring system ideally suited for water and waste-water monitoring applications. Various sensors are available and connect using a common water proof connector. The instrumentation is weather protected to IP66 clasification allowing external mounting. The design also accommodates panel mounting. PPM also
- PRODUCT
- Pollution & Process Monitoring (PPM)
- PPM manufactures and distributes continuous on-line water analysers, suitable for water & waste water applications. The IQ Sensor System is a digital interafce accepting multiple sensors into a single controller. The Tetracon 700 IQ is a digital sensor reporting the conductvity of water and waste water. The four ring technology self adjusts for
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The M400 single channel, multi-parameter transmitter features advanced ISM (intelligent sensor management) technology and supports pH/ORP, oxygen and conductivity measurements. Intelligent systems for pH and oxygen sensors reduce the maintenance cost and offer diagnostic tools that improve lifetime, performance and reliability of process
- The SD range of handheld meters are for the determination of pH, ORP, conductivity, TDS, salinity and temperature. It comprises a range of compact, easy-to-use, handheld instruments for the accurate measurement of: SD 50: pH (0-14 units) and temperature; SD 60: ORP (-1800 to +1800 mV); SD 70: conductivity (0-1999 uS/cm; 2-20 mS/cm); SD 80: total
- The MD 100 is a dedicated Lovibond® photometer for cooling water. With one photometer to carry out all the tests associated with cooling water, plant managers no longer need to use multiple kits with up to 13 different pieces of equipment when one is now available. The photometer has a dedicated range of application-specific tests. With the same
- The Type 8285 is a modular analysis system that can be used to measure the pH, ORP and conductivity of process liquids. It can be fitted and remain permanently in-process, even during CIP and SIP purification. The Type 8285s avoids contamination and cuts process time and cost by removing the need for sensor removal, cleaning and recalibration. The
- PRODUCT
- Bürkert Fluid Control Systems
- Pollution & Process Monitoring Ltd is a specialist manufacturer and supplier of water quality instrumentation. We support the products we manufacture and distribute in the UK with planned and emergency site attendance. Commissioning and product training is also provided to ensure that instrumentation is delivered and subsequently maintained to the
- PRODUCT
- Pollution & Process Monitoring (PPM)
- The portable IQ Sensor Net system takes robust-process measurement technology and packages it into a portable format. Two diffferent bespoke systems are available providing different levels of portability and instrument security. The water quality monitoring system is skillfully integrated by Pollution & Process Monitoring specialising in
- PRODUCT
- Pollution & Process Monitoring (PPM)
- IQ Sensor Net is a fixed monitoring system ideally suited to water and wastewater monitoring applications. Various sensors are available and connect using a common waterproof connector. The instrumentation is weather-protected to IP66 classification allowing external mounting. The design also accommodates panel mounting. Data is recorded at a
- PRODUCT
- Pollution & Process Monitoring (PPM)
- ATi's Q45C4 4-electrode conductivity monitor is suitable for monitoring almost any water-based process including, drinking water, cooling water and process wash water accurately and reliably. In a traditional 4-electrode sensor, the electrodes are used to generate a "drive potential" through the aqueous solutions and to measure the level of
