Monitoring & testing on Enviropro. Helping you find the best solution for your project.
852 results

Monitoring & testing - helping you find the best solution for your project.

  • Pollution & Process Monitoring (PPM): Manchester Airport uses Protoc 300 to control runoff
    Manchester Airport uses Protoc 300 to control runoff
    Pollution & Process Monitoring (PPM)
    Manchester Airport Group (MAG) purchased Protoc TOC analysers to monitor the quality of run-off water from its airport runways and hardstandings, and to control discharge. The Airport required water quality instrumentation...
  • Bürkert Fluid Control Systems: Welding cooling systems, Magna Chassis, France
    Welding cooling systems, Magna Chassis, France
    Bürkert Fluid Control Systems
    Burkert produced a welding cooling system that was adopted as a standard fitting on all welding robots at Magna System Chassis in France - part of Magna International, a global, brand-independent, engineering and...
  • Pollution & Process Monitoring (PPM): PROTOC® TL TOC analyser
    PROTOC® TL TOC analyser
    Pollution & Process Monitoring (PPM)
    PROTOC® TL is a trace level TOC analyser used for the continuous monitoring of water and pure water production, particularly in applications in the semi-conductor and pharmaceutical industry. It is a fast, reliable and...
  • Pollution & Process Monitoring (PPM): Sludge blanket level measurement (sedimentation tanks)
    Sludge blanket level measurement (sedimentation tanks)
    Pollution & Process Monitoring (PPM)
    PPM manufactures continuous on-line water analysers, suitable for water & waste water applications. The ENV100 sludge blanket monitor uses a submersible sample probe and ultrasonic level measurement. The instrument is...
  • Bürkert Fluid Control Systems: Type 8056 full-bore mag flowmeter
    Type 8056 full-bore mag flowmeter
    Bürkert Fluid Control Systems
    The Type 8056 full bore mag flowmeter is made from a Type S056 magnetic sensor fitting connected to an electronics Type SE56 sensor: designed for liquids applications with a minimum conductivity of 5µS/cm; can control...
  • Hydroklear Services: Leachate measurement monitors
    Leachate measurement monitors
    Hydroklear Services
    Hydroklear has developed a number of packages for the continual or intermittent monitoring of liquids for the presence of leachate in normal watercourses. They are used on sites where it is necessary to locate potential...
  • Prochem Services: Annular sleeve diaphragm seals
    Annular sleeve diaphragm seals
    Prochem Services
    Annular sleeve diaphragm seals, often referred to as gauge isolators are designed to enable the use of standard construction pressure gauges and switches on process lines carrying slurries or sludges that would typically...
  • George Fischer Sales: Signet flow integral systems with 9900 transmitter
    Signet flow integral systems with 9900 transmitter
    George Fischer Sales
    The Signet 9900 transmitter provides a single channel interface for many different parameters including: flow; pH/ORP; conductivity/resistivity; salinity; pressure; temperature; level; other sensors that output a 4-20mA...
  • Inspectahire Instrument Company: CorDEX T7000 explosion proof cameras
    CorDEX T7000 explosion proof cameras
    Inspectahire Instrument Company
    CorDEX T7000 thermal imaging cameras are ATEX certified as safe to use in Zone 1 IIC T4 (vapour) and IIIC T200°C (dust) areas without a hot work permit. They provide 320 x 240 infrared resolution allowing the capture of...
  • Inspectahire Instrument Company: Sky Eye A-Series thermal imaging UAV
    Sky Eye A-Series thermal imaging UAV
    Inspectahire Instrument Company
    The Sky Eye A-Series UAV (unmanned aerial vehicle, commonly known as a drone) is used to carry any Flir A-series camera, allowing thermographic inspections to be carried out on all kinds of structures and environments. It...
  • Inspectahire Instrument Company: FLIR T400-series and T400bx-series thermal imager
    FLIR T400-series and T400bx-series thermal imager
    Inspectahire Instrument Company
    T400-series and T400bx-series thermal imaging cameras are designed for applications where high performance is required at an affordable price. The cameras combine ergonomic design with image quality of 320 x 240 pixels. A...
  • Bürkert Fluid Control Systems: Type 8285 analytical transmitter
    Type 8285 analytical transmitter
    Bürkert Fluid Control Systems
    The Type 8285 is a modular analysis system that can be used to measure the pH, ORP and conductivity of process liquids. It can be fitted and remain permanently in-process, even during CIP and SIP purification. The Type 8285s...
  • Pollution & Process Monitoring (PPM): Final effluent ProAm ammonia monitoring at Wessex Water
    Final effluent ProAm ammonia monitoring at Wessex Water
    Pollution & Process Monitoring (PPM)
    The Poole WwTW site was initially selected to test the ProAm ammonia monitor on final effluent, over a two month test period in 2004. The trial was a success and Wessex Water decided to make the installation permanent. Since...
  • Inspectahire Instrument Company: FLIR T600-Series thermal imaging camera
    FLIR T600-Series thermal imaging camera
    Inspectahire Instrument Company
    T600-series thermal imaging cameras are designed, in conjunction with users, to meet the needs of the most demanding applications. The design incorporates a tiltable infrared unit which allows the user to work more quickly...
  • Pollution & Process Monitoring (PPM): Chemitec phosphate analyser
    Chemitec phosphate analyser
    Pollution & Process Monitoring (PPM)
    Phosphate is an important colorimetric measurement for process control applications such as coagulation control and complaince measurement. The measurement is performed on an interval of time. The analyser can accomodate...
  • {{entry.title}}
    {{entry.name}}
    {{trimSnippet(entry.snippet,225)}}

Monitoring & testing - helping you find the best companies for your project.