Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Surface aeration
Surface aeration for municipal and industrial wastewater treatment, lagoons and oxidation ditches. Floating and fixed surface aerators, brush and aspirating units, high-speed and low-speed mixers. Used for oxygen transfer and mixing, BOD removal, nitrification, sludge suspension, odour control and algae management.
Surface aeration - helping you find the best solution for your project.
High- and low-speed fixed or floating surface aerators
High- and low-speed surface aerators allow versatility across a range of industries and wastewater treatment applications. They provide efficient wastewater aeration and intensive mixing capabilities which are environmentally- and fish-friendly. Units can be supplied as fix mount or with floats. The turbulent directional mixing and jet propulsion- PRODUCT
Aquatreat Environmental Products
Forced Bed Aeration™ for wetland wastewater treatment
Forced Bed Aeration™ (FBA™) is a technology designed to enhance the performance of wetlands for the treatment of high-strength wastewaters by blowing air through the wetland system. The increased presence of oxygen increases the reed bed treatment capacity by up to 15 times, and can be retrofitted to existing wastewater treatment system
Anti-fouling aspirators for wastewater treatment
Aquatreat's anti-fouling aspirators have been developed in response to the growing challenges posed by flushed wipes and rugs, and other heavy debris conditions in water and wastewater treatment systems. Operating without aerosols or any need for fine screening, the anti-fouling aspirators can be integrated into either new or existing treatment- PRODUCT
Aquatreat Environmental Products
Rapid response aeration equipment hire
Aquatreat Environmental offers aeration equipment for reactive short-term or planned long-term hire. Aeration systems are available for sites needing an immediate aeration boost and are designed to be modular, easily deployed and quickly installed. Complete modular aeration systems are available for immediate hire including: drop in, submerged
Select Series 2 Torrent - floating lake aerator
The Select Series 2 Torrent floating lake fountain produces a bubbling froth of extremely aerated water. It is available in a range of sizes from 0.75 to 5.5kW: increased suction screens are available on vertical units to increase the suction area which results in less maintenance; optional cable length and in-house cable sizing; lightweight
Volcano III - floating lake aerator
The Volcano III floating lake aerator provides extremely high flow rates resulting in huge volumes of water turnover and high DO or dissolved oxygen levels. Volcano III is suitable where a minimal surface display is required but efficient aeration is of importance. It has high LPM pumping rates and oxygen transfer capabilities. Options to add
AirJet aeration system
Landias AirJet system aerates and mixes water, wastewater and sludges in effluent treatment plants for industrial and agricultural applications. The AirJet system consists of a Landia submersible pump type DG-1, with one or more venturi ejectors. The ejectors are combined with chopper pumps for aeration efficiency. Features of the AirJet system
AER-GS – fixed low speed submersible aerator and mixer
AER GS Fixed low-speed submersible aerator/mixer for aeration and mixing in water treatment, using a blower with variable frequency drive to control oxygen supply. Suitable for SBR, ASP, and MBR systems, with drive motors from 1.1 to 30kW and airflow up to 3,250 m³/h: low-speed submersible unit for aeration and mixing in water treatment; airflow
Vertical Aerator - steel wastewater tank mixer for bridge or pontoon use
Tuke & Bell Vertical Aerator is a tank-mounted aeration system with a horizontal rotating plate driven by a vertical torque tube, available in 4kW–110kW sizes. Designed for bridge or floating installation, it uses hydraulically efficient vanes and allows immersion adjustment. Made from heavy duty materials for erosion resistance, it achieves
AER-SL – floating and submersible directional aspirator aerator
Aquaturbo® AER-SL is a floating and submersible aspirator for lagoons and channel / ditches. It is an aspirator aerator with a patented impeller and vacuum chamber design that draws air below the water level and disperses it as micro-bubbles in any chosen direction. It is suitable for applications where aeration and directional flow generation are
O2 Max surface aerators
O2 Max surface aerators are energy-saving, low-vibration surface aerators, designed to optimise the biological treatment phase of the wastewater treatment process: high aeration efficiency; energy savings possible; cost savings possible; fine and smooth splash pattern; very low reaction forces; quiet and vibration free operation; interchangeable
Aquaeromix - stainless steel floating wastewater aerator and mixer
Aquaeromix inclined shaft aerator is designed for mixing and directional flow of oxygen into wastewater in lagoons and equalisation basins. Self-aspirating impeller and hollow shaft draw air below the water surface, producing fine to medium bubbles. Surface-mounted unit with direct drive motor, made from AISI 304/316 or special stainless steel
Rental aerators and mixers for immediate hire
To hire aerators and mixers to deal with unexpected summer demand and for on-site refurbishments at wastewater and effluent treatment plants, contact Peter Wood – [email protected] 07939096048
Halia® Aeration System LOX high-rate oxygenation
Halia® Aeration Systems comprise high-rate oxygenation and aeration equipment that ensure efficient removal of COD, BOD, ammonia and sludge solids from municipal and industrial wastewater. The Halia® Aeration System can be used for retrofit applications in existing aerobic wastewater treatment plants, or as a fixed system for new or refurbished
Vertex low-speed surface aerators offer constant efficiencies over the entire lifetime of the system, which can often be up to 30 years. They are suitable for a wide range of applications including tanks of any shape and size, oxidation ditches, MBR and SBR systems, lagoons, ponds, mixing tanks and buffer tanks. They are designed so that the
Spiral aerators provide efficient aeration with strong directional mixing in wastewater treatment systems. They are particularly useful in emergency situations where other aeration plant has broken down or needs supplementing, and where horizontal flow is required, such as in oxidation ditches and aerated lagoons. Spiral aerators have been used in
Surface aeration - helping you find the best companies for your project.
SFA enviro
Manufactures floating and fixed aerators, decanters and mixers for sale or hire. Aerators work on the basis that liquid is aspirated via the suction cone and is pumped axially up through the cylindrical volute, after which its flow is bent from axial to radial, ensuring that maximum kinetic energy is transferred to the water surface. Also offers a
Unit 1, Watford Interchange,, Colonial Way, Watford, WD24 4WPAquatreat Environmental Products
Design and install many different type of aeration systems, including: diffused aeration; aerator and mixer; high speed floating surface aerators; radial submerged aerators; surface aspirating spiral aerators; turbine aerator. The aeration system selected for your particular treatment application is based on optimum efficiency and performance
Unit 20 Napton Industrial Estate , Brickyard Road, Southam, CV47 8NTHeathland Group
Heathland Group Water Fountains and Aeration Systems Specialists. Heathland Group is considered the UK and Europe's most trusted supplier and installer of the very best Water Fountain and Water Aeration equipment available on the market. Our successes have been achieved through hard work, first-class support and building the trust of our clients
Unit B, Munnings Court, Harfreys Road, Harfreys Industrial Estate, Great Yarmouth, NR31 0LSAir Products
Provides process design, equipment and services for water and wastewater treatment. Includes automated systems that comprise high rate oxygenation and aeration equipment. They provide efficient removal of COD, BOD, ammonia and sludge solids for food, paper, chemicals, rendering and waste management industries, and offer solutions to problems such
1000 Hillswood Drive, Chertsey, Surrey, KT16 0PSARM Reedbeds
Rydal House, Colton Road, Rugeley, WS15 3HFLandia UK
Produces a submersible mixer / aerator with an ejector nozzle. The device is self-aspirating down to a liquid depth of 4m. Motors range from 1.1 to 18.5kW. Propeller and venturi nozzles are of stainless steel construction. Applications in wastewater treatment plant, agriculture, and the paper, chemical and food industries
Waymills Industrial Estate, Waymills, Whitchurch, SY13 1TTSpaans Babcock
Specialises in products for water and wastewater applications. Surface aerators are designed to optimise the biological treatment phase of the wastewater treatment process, and are available as a fixed arrangement for mounting on a bridge, or as a floating unit. Brush aerators consist of a stainless steel assembly of specially profiled blades
305 Phoenix Close, Heywood, OL10 2JGTuke & Bell
Supplies horizontally or vertically mounted aerators, and coarse and fine bubble aeration systems
Trent Vale House, Vulcan Road, Lichfield, Staffordshire, WS13 6RW
