Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Water leak detectors
Water leak detectors for commercial, industrial and infrastructure assets. Point and cable sensors with addressable or zoned controllers, BMS/SCADA integration and remote alarms. Automatic shut-off valves and monitoring panels. Early detection on floors, pipework, plant rooms and data centres.
Water leak detectors - helping you find the best solution for your project.
UDOF-24 ‘Universal’ water in overflow pipe detector
UDOF-24 ‘Universal’ Overflow Detector is used to detect water in an overflow pipe. It requires a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS
Aqualarm UDP-24 - universal point-of-use water detector
UDP-24 point-of-use water detector comprises two components: a detector module and a point detector connected together via a 1m jumper cable. It needs a 24 volt power source. In the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc. The Detector Module houses electronic circuitry; the Point Detector
Aqualarm CDBi-485 - water leak zone detector module
The Aqualarm CDBi-485 zone detector module is made of a purpose-moulded ABS box, housing the electronic circuitry. At one end of the module a locking line socket is fitted to enable connection of the detecting cable. The other end is fitted with glands for connection to the PCB. A red LED is incorporated in the top of the module
STDi-24 - point of use conductive water detector
The STDi-24 point of use conductive water detector is designed for use in plant rooms and other solid floor areas. It has two components - the detector module and the point detector - connected by a 1m jumper cable. Conductive fluid touching the two detection pins simultaneously will cause the detector to enter an alarm condition. Alarm status and monitoring is via a network
OFDi-485 Overflow Detector
The Aqualarm OFDi-485 Overflow Detector is made up of TWO components, the Detector Module and the Overflow Detector, connected via a 2m jumper cable. Both the Detector Module and the overflow detector are manufactured from STAREX General ABS (SD-0150) plastic. The bottom of the Overflow Detector is fitted with a ¾” BSP threaded connector with two
Water leak detection systems
J.A.M. is expert at designing, manufacturing and installing water leak detection systems. A wide range of options is available to deliver effective solutions for specific building services requirements. Free project consultation and design advice with no obligation quotation service
i-Zone Mini - 4-zone control panel for water leak detectors
The i-Zone Mini control panel can monitor up to four zones for water leak detection using cable, point, float or overflow detectors. The status of each detector is displayed on an LED monitor. Up to 100m of network cable per zone
STDi-485 Point of use water detector
The STDi-485 Point of Use water Detector is comprised of TWO components, the detector module and the point detector, connected together via a 1m jumper cable. Both the Detector Module and the Point detector are manufactured from STAREX General ABS (SD-0150) plastic. The Detector Module houses the electronic circuitry and the Point Detector houses
UDF-24 ‘Universal’ Float Detector for water levels
The UDF-24 ‘Universal’ Float Detector requires a 24 volt power source, and in the event of an alarm a volt-free contact is triggered, giving an alarm signal back to a BMS etc: does not require an i-Zone control panel; for use within Sumps, Plant rooms, & water tanks; can be set to alarm on the rise or fall of water; manufactured from rust proof
OFDi-24 overflow detector – water in overflow pipes
The Aqualarm OFDi-24 overflow detector is made up of two components: the detector module and the overflow detector, connected via a 2m jumper cable. Both the detector module and overflow detector are manufactured from STAREX General ABS (SD-0150) plastic. The bottom of the overflow detector is fitted with a ¾” BSP threaded connector with two
iZ-T25 - touchscreen control for multiple leak detectors
The iZ-T25 i-Zone touch screen control panel can simultaneously monitor all 25 Aqualarm detectors, including water, oils, chemicals, refrigerant gas leak detectors, and temperature and humidity detectors. Two pulsed flowmeters for incoming mains water can also be monitored, with the facility to control a solenoid valve. By connecting the control
UDC-24 ‘Universal’ Zone Detector Module for water leaks
The UDC-24 ‘Universal’ Zone Detector Module requires a 24-volt power source and, in the event of an alarm, a volt-free contact is triggered, giving an alarm signal back to a BMS. Does not require an i-Zone control panel; zone detector module for connection to detecting cable; manufactured from rust-proof and hard-wearing ABS plastic; LED and
Aqualarm FLi-485 - commercial liquid level float detector
The Aqualarm FLi-485 Liquid Level Detector is made up of two components, the detector module and the float switch, connected together via a 1m jumper cable. Both the detector module and the float switch are manufactured from STAREX General ABS (SD-0150) plastic. The glass filled nylon float switch is held in place by a sprung clip, secured to the
Aqualarm CD-X - water leak detection cable
The Aqualarm CD-X water leak detection cable is comprised of two flat tinned copper braids separated, and protected, by Helegaine self-extinguishing nylon 66 sleeves. This type of configuration gives protection to the sensing cores against dust, other types of conductive contamination and mechanical damage. The cable is available in modular
Aqualarm ZLM-500 zoned cable monitoring for water leaks
The Aqualarm ZLM-500 zoned locating module is used to monitor combined leader / jumper and detecting cables for water leaks and cable damage. ZLM-500 is typically used for larger areas allowing monitoring per zone. It can monitor up to 500m of cables and allows users to locate the point of the alarm condition with an accuracy of ±1m, along with 'water detected' or 'open circuit' alarms
Water leak detectors - helping you find the best companies for your project.
J.A.M. Ltd
J.A.M. Ltd manufactures water leak detection and environmental monitoring systems. Aqualarm systems are specified to detect leaks or monitor environmental conditions in offices, computer rooms, financial trading areas, plant rooms, listed buildings, archives, storage areas, museums, hospitals and MOD installations. Zoned environmental monitoring
ABLE Instruments & Controls
Manufactures plate and cable electrodes that signal the presence of a conductive liquid caused by, for example, a burst pipe. Can be used on normally dry floors or false ceilings, or in normally dry pipeline and cable ducts. Available for direction connection to a PLC, a small-scale control system, a DDC controller or a fieldbus coupling element
Cutbush Park, Danehill, Lower Earley, Reading, RG6 4UTAndel
Offers a leak detection system which is installed in sensitive and critical areas to give an early warning of leakage from any source, including pipes, tanks and air conditioning plants. The system uses lengths of water sensing detection cable or point sensors which are connected individually, or in groups, to multizone control panels or to
New Mills, Brougham Road, Marsden, Huddersfield, HD7 6AZAquilar
Commercial and industrial leak detection equipment
Unit 30 Lawson Hunt Industrial Park, Broadbridge Heath, Horsham, RH12 3JRBARTEC
Offers leak detection systems for computer / telephone centres, clean air rooms, pipework and sprinkler installations. Probe types include a dual-conductor measuring transducer with a sensor head working on a capacitive basis. It can be deployed to detect and differentiate between leaking media. There can be a distance of up to 800 m between the
Arundel House, Hollinsbrook Park, Pilsworth, Bury, BL9 8RNCasella
Offers an indoor air quality kit designed to monitor and record the storage facilities, factories, office or general workplace environments. The instrument is compact and portable, allowing it to be transported and operated by a single person. Power is supplied from the mains, optional re-chargeable battery pack or a combination of the two
Regent House, Wolesley Road, Kempston, Bedford, MK42 7JYChelsea Technologies
Manufacturer of a subsea pipeline leak detection system for the oil and gas industries. Leaks are found by sensing the fluorescence of leaking hydrocarbons. Available for hire, the system can detect leaks as low as 1ppm in sea water. It can also be used to test new pipelines by the introduction of fluorescent dyes such as rhodamine or fluorescein
55 Central Avenue, West Molesey, KT8 2QZCynergy3 Components
Manufactures flow switches for incorporation into leak detection systems. Reed-based devices, the switches are produced in acetal resin. Designed for use in liquid flow systems up to 10 bar pressure. Can be mounted horizontally or vertically
7 Cobham Road, Ferndown Industrial Estate, Wimborne, BH21 7PEDean & Wood
Supplies refrigerant leak detectors suitable for CFC, HCFC and HFC refrigerants and ammonia. Systems comprise a central control panel and remote sensors that are wired to the controller and commissioned on site by the installer. Detection levels are set at 100ppm for most common refrigerants. Also offers integrated area monitors designed to fit
15 Bruntcliffe Avenue, Leeds 27 Industrial Estate, Morley, Leeds, LS27 0LL
