Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Turbidity measurement
(77)
Turbidity measurement for water, wastewater and process quality control. In-line and portable turbidity meters, optical sensors and nephelometers. Suspended solids and clarity monitoring, ISO 7027/EPA 180.1 methods. Controllers, transmitters and data logging. Calibration standards, flow cells and installation fittings for municipal, industrial and environmental applications.
Turbidity measurement - helping you find the best solution for your project.
USM small, powerful, cost-effective water quality meter
Powerful, versatile and very cost-effective USM water quality meter that measures a wide range of environmental parameters. As standard, the USM will measure one of a number of ISE (Ion Selective Electrodes), plus an additional optional Modbus Electrode, so the user can measure two parameters at the same time
USI – Flow & Water Quality - multiparameter water monitoring device
Universal Smart Instrument (USI) by Smart Storm is a multiparameter water quality instrument for wastewater monitoring, combining ultrasonic flow measurement and pH/Redox sensing in one device. Measures up to seven water quality parameters simultaneously and replaces several standard instruments: multiparameter device for flow and water quality
USI Water Quality Analyser - high-performance multi-parameter monitoring
The Universal Smart Instrument (USI) Water Quality Analyser is a high-performance, online multi-parameter monitoring solution for water, wastewater, environmental and industrial applications which delivers real-time measurement of up to 8 water quality parameters, combining digital and ISE sensors in one compact, rugged IP65 weatherproof analyser
Turbiscan colloidal stability analyser
Turbiscan equipment offers stability and ageing analysis of concentrated colloidal systems. The on-line systems detect early changes in particle size and concentration without dilution. Turbiscans optical sensor consists of a pulsed near-infrared light source and two synchronous detectors. The transmission detector picks up the light transmitted
TurbiCheck waterproof turbidity meter
The TurbiCheck waterproof turbidity meter is suitable for regulatory monitoring and process control and is used for measurements ranging from 0.01 to 1100 NTU. Using a white light source with stipulated 90° detection, the TurbiCheck meets the specifications for EPA turbidity measurement (EPA Standard 180.1). Compact and portable, the instrument- PRODUCT
Lovibond Tintometer
The Visoturb 700 IQ turbidity and the Visolid 700 IQ sensors are part of the IQ Sensor Net range. The Visoturb 700 IQ turbidity sensor digitally scales over the measuring range 0-4,000 NTU. It uses nephlometric light scatter (IR light source) to measure the turbidity of a water or waste water sample. The sensor can be directly immersed into the- PRODUCT
- Pollution & Process Monitoring (PPM)
PPM can provide pre-fabricated instrument panels for intake protection measurement applications. There are a number of standard pre-fabricated water panels covering the dedicated measurement of pH, ORP, conductivity, turbidity, free chlorine and temperature. Whilst the instrumentation can be supplied loose, the advantage of pre-fabrication is that- PRODUCT
- Pollution & Process Monitoring (PPM)
Suitable for connection of TriOS sensors. Two different sensors can be connected to a single controller providing local display and dedicated outputs for each sensor: aluminium die-cast housing with local LCD digital display, five status LEDs and integral web browser; suitable for connection of any two TriOS digital sensors communicating using- PRODUCT
- Pollution & Process Monitoring (PPM)
Glass-free inline sensor designed for the detection of phase changes and suspended solids in process applications. Suitable for installation in pipes, vessels, open tanks and basins, it is intended to minimise product losses and ensure product purity. The sensor is made for hygienic environments and can withstand high temperatures and aggressive
The S461/LT DIG Digital Turbidity Sensor connects to the Chemitec 50 Series digital controller - 1 or 8 sensor connection - which provides local display, freely programmable analogue and digital change over contacts. Other parameters include DO, pH, Redox, Conductivity & Suspended Solids: providing local display, freely programmable analogue and- PRODUCT
- Pollution & Process Monitoring (PPM)
The IQ Sensor Net system is a fixed monitoring system ideally suited for water and waste-water monitoring applications. Various sensors are available and connect using a common water proof connector. The instrumentation is weather protected to IP66 clasification allowing external mounting. The design also accommodates panel mounting. Data is- PRODUCT
- Pollution & Process Monitoring (PPM)
Robotic analysers are based on flexible platforms where different liquid handling procedures can be automated in routine analytical laboratories. These can analyse a range of parameters, including biochemical oxygen demand (BOD), chemical oxygen demand (COD), and carbonate or bicarbonate concentration. They are also suitable for ion selective
Digital 4-channel display and control unit (with integrated solenoid valve for pneumatic control). TriBox3 is a measurement and control system for all TriOS sensors. The device provides 4 sensor channels with selectable RS-232 or RS-485 function. In addition to Modbus-RTU, various other protocols are available. A built-in valve allows compressed- PRODUCT
- Pollution & Process Monitoring (PPM)
The IQ Sensor Net system has been installed within a wall-mount, frost protected enclosure providing frost protection and flow cell measurement. The flow cell design may accomodate any IQ digital sensor covering a wide range of water quality parameters. The system has been installed to monitor processes where chemical precipitation affects- PRODUCT
- Pollution & Process Monitoring (PPM)
Continuous Water Quality Monitoring System by Endress+Hauser is a solar-powered station for 24/7 river water quality monitoring at remote sites. Designed to meet Section 82 compliance, it measures pH, turbidity, dissolved oxygen, temperature, ammonia, and conductivity. Integrated telemetry enables real-time data transfer and seamless connection to- PRODUCT
- Endress+Hauser
The IQ Sensor Net system is a fixed monitoring system ideally suited for water and waste-water monitoring applications. Various sensors are available and connect using a common water proof connector. The instrumentation is weather protected to IP66 clasification allowing external mounting. The design also accommodates panel mounting. PPM also- PRODUCT
- Pollution & Process Monitoring (PPM)
IQ Sensor Net is a fixed monitoring system ideally suited to water and wastewater monitoring applications. Various sensors are available and connect using a common waterproof connector. The instrumentation is weather-protected to IP66 classification allowing external mounting. The design also accommodates panel mounting. Data is recorded at a- PRODUCT
- Pollution & Process Monitoring (PPM)
The Chemitec 50 Series digital controller - 2 or 4 sensor connection - provides local display, freely programmable analogue and digital change over contacts. Key features: LCD graphic display with background illumination; internal logging with USB data transfer; ABS surface-mount enclosure with IP66 ingress protection; 4 set points (max 2 for each- PRODUCT
- Pollution & Process Monitoring (PPM)
Pollution & Process Monitoring Ltd is a specialist manufacturer and supplier of water quality instrumentation. We support the products we manufacture and distribute in the UK with planned and emergency site attendance. Commissioning and product training is also provided to ensure that instrumentation is delivered and subsequently maintained to the- PRODUCT
- Pollution & Process Monitoring (PPM)
The S461 TN digital turbidity sensor is a Chemitec 50 Series digital controller - 2 or 4 sensor connection - which provides local display, freely programmable analogue and digital change over contacts. LCD graphic display with background illumination; internal logging with USB data transfer; ABS surface-mount enclosure with IP 66 ingress- PRODUCT
- Pollution & Process Monitoring (PPM)
PPM has considerable experience in providing bespoke engineered liquids measurement systems integrating water quality instrumentation. Systems include a walk-in analyser kiosk complete with sample and electrical distribution, fully-fitted towable trailers with small enclosures to contain discrete instruments, and PVC wallboards complete with- PRODUCT
- Pollution & Process Monitoring (PPM)
The portable IQ Sensor Net system takes robust-process measurement technology and packages it into a portable format. Two diffferent bespoke systems are available providing different levels of portability and instrument security. The water quality monitoring system is skillfully integrated by Pollution & Process Monitoring specialising in- PRODUCT
- Pollution & Process Monitoring (PPM)
Reliable and verifiable digital sensor for measuring pH, conductivity, chlorine and dissolved oxygen. Data can be saved directly in the sensor, guaranteeing interference-free measuring signals, whilst simplifying process measuring technology. Memosens eliminates the problems of moisture ingress, leakages and corrosion. Its inductive, plug-in
Turbidity measurement sensor for in-situ environmental or process monitoring including quality testing and management of water in rivers, reservoirs, groundwater as well as water and wastewater treatment. Minimal water sample flow needed- PRODUCT
- Bürkert Fluid Control Systems
